|
|
|
901 398 00 00B
2002-2006 Sprinter 2500 BILSTEIN High Roof Strut/Shock Kit ***FREE USA SHIPPING***
For cargo van models.
Set of all four shock absorbers, made by BILSTEIN.
|
|
|
|
|
901 398 00 00LR
2002-2006 Sprinter 2500 BILSTEIN Low Roof Strut/Shock Kit ***FREE USA SHIPPING***
For cargo van models.
Set of all four shock absorbers, made by BILSTEIN.
|
|
|
|
|
901 398 00 00
2002-2006 Sprinter 2500 KYB High Roof Strut/Shock Absorber Kit ***FREE USA SHIPPING***
Set of all four shock absorbers, made by KYB. |
|
|
|
|
901 398 01 00
2002-2006 Sprinter 2500 KYB Low Roof Strut/Shock Absober Kit ***FREE USA SHIPPING***
Set of all four shock absorbers, made by KYB. |
|
|
|
|
901 398 00 01B
2002-2006 Sprinter 3500 KYB High Roof Strut/Shock Absorber Kit ***FREE USA SHIPPING***
Set of all four shock absorbers, made by KYB.
|
|
|
|
|
22-226648
Front BILSTEIN HEAVY DUTY Strut Assembly 2500 & 3500 (High Roof) 2002-2006
Heavy Duty B6 strut for high roof version vans.
Sold each. Order two, if replacing both sides. |
|
|
|
|
22-226631
Front BILSTEIN HEAVY DUTY Strut Assembly 2500 & 3500 (Low Roof) 2002-2006
Heavy Duty B6 strut for low roof version vans.
Sold individually. Order two, if replacing both sides. |
|
|
|
|
22-214768
Front BILSTEIN Strut Assembly 2500 & 3500 (High Roof) 2002-2006
Fits all Sprinter High Roof 2500 and 3500 models.
2 Required, sold individually.
Sprinters with 15 inch wheels may experience "bottoming out" if you have a sagging front transverse spring and worn suspension. Replacing the shocks alone may not remedy this situation.
|
|
|
|
|
22-214751
Front BILSTEIN Strut Assembly 2500 & 3500 (Low Roof) 2002-2006
Fits all Sprinter Low Roof 2500 and 3500 models
MFG: Bilstein
Sprinters with the smaller diameter 15 inch wheels may experience "bottoming out" if you have a sagging front transverse spring and worn suspension. Replacing the shocks only will not remedy this situation.
|
|
|
|
|
T1N Leaf Spring Kit
Front Leaf Spring Bushing Kit 2002-2006
If you are going to replace your front leaf spring, it's highly recommended to replace all the items found in this kit because of the labor involved.
Spring buffers can be replaced but it seems they rarely ever wear out. They are available HERE. |
|
|
|
|
906 320 13 33
Front Strut 4WD Sprinter ONLY 2015-2018
Fits left or right side, 4 wheel drive models only.
These struts are much longer than the RWD models
|
|
|
|
|
115906
Front Strut Assembly 2500 SACHS 2002-2006
Fits all Sprinter 2500 models for 2002-2006
MFG: SACHS/BOGE
SACHS is the OEM Supplier to Mercedes for this part.
|
|
|
|
|
335809
Front Strut Assembly 2500/3500 KYB (High Roof) 2002-2006
Fits Sprinter 2500 & 3500 models with High roof version
Sprinters
with 15 inch wheels may experience "bottoming out" if you have a
sagging front transverse spring and worn suspension. Replacing the
shocks alone will not remedy this situation.
|
|
|
|
|
335810
Front Strut Assembly 2500/3500 KYB (Low Roof) 2002-2006
Fits Sprinter 2500 & 3500 models with low roof version
MFG: KYB
|
|
|
|
|
115904
Front Strut Assembly 3500 SACHS 2002-2006
Fits all Sprinter 3500 models
MFG: SACHS/BOGE
TWO REQUIRED, SOLD INDIVIDUALLY
SACHS is the OEM Supplier to Mercedes for this part.
|
|
|
|
|
901 323 01 98
Front Strut Boot 2002-2006
Front strut dust boot for all 2500 and 3500 models
Sold individually - Order Two if doing both sides.
|
|
|
|
|
901 323 11 85
Front Strut Mount - Lower 2002-2006
Lower Front strut mount, fits both 2500 & 3500 models
Manufactured by Sachs, OEM supplier to Mercedes for this part. |
|
|
|
|
901 323 00 85
Front Strut Mount - Upper 2002-2006
Top front shock mount, fits both 2500 & 3500 models
Manufactured by Rein, part of the ContiTech/CRP automotive group.
|
|
|
|
|
904 320 06 01-MB
Front Transverse Leaf Spring - Genuine Mercedes 2002-2006
Genuine Mercedes Part - Often found to be the cause of front end "bottoming out" problems.
This composite spring will eventually sag or break in higher mileage vehicles, causing the van's front end to droop and cause a lot of suspension banging noises. |
|
|
|
|
904 320 06 01-AFT
Front Transverse Leaf Spring 2002-2006
These are made in Turkey.
Often found to be the cause of front end "bottoming out" problems. This composite spring will eventually sag or break in higher mileage vehicles, causing the van's front end to droop and cause a lot of suspension banging noises. |
|
|
|
|
901 322 26 19
Front Transverse Spring Seat 2002-2006
For front of transverse spring, two are required. Also, see left and right lower seats shown below
From spring to axle beam/frame (upper)
|
|
|
|
|
903 320 28 06-MB
Genuine Mercedes - Rear Leaf Spring T1N 2002-2006
This is a Genuine Mercedes Benz Rear Leaf Spring.
CALL or EMAIL with VIN number to verify fitment, price, and part number! |
|
|
|
|
005 990 56 04
Genuine Mercedes - T1N - Rear Leaf Spring Lower Shackle Bolt
This is the rear leaf spring bolt for the lower shackle #135 in the diagram. |
|
|
|
|
913023-012002
Genuine Mercedes - T1N - Rear Leaf Spring Lower Shackle Nut
This is the rear leaf spring nut for the lower shackle #145 in the diagram. See paired bolt here. |
|
|
|
|
901 322 21 19
Left Side Transverse Spring Seat 2002-2006
For the front transverse spring, 1 required
From spring to spring plate (lower)
|
|
|
|
|
19-100180
Rear BILSTEIN Shock Absorber - 2500 CARGO VAN 2002-2006
Fits all Sprinter 2500 cargo vans
MFG: Bilstein |
|
|
|
|
24-177702
Rear BILSTEIN Shock Absorber - 2500 MOTORHOME 2002-2018
Two Required - Sold Individually
Motorhome shocks are longer than standard van shocks.
Heavy Duty (High Pressure Gas) for most Sprinter based motor home with single wheel rear axle, e.g. Airstream Westfalia
OVERALL LENGTH OF THIS SHOCK ABSORBER IS APPROXIMATELY 560 mm or 22 inches with both end bushings having 14mm holes. Some people report requiring an adapter sleeve to make these fit the original 12mm mounting bolt on the bottom end.
|
|
|
|
|
19-064529
Rear BILSTEIN Shock Absorber - 2500 PASSENGER VAN 2002-2006
Fits Sprinter 2500 passenger vans ONLY
MFG: Bilstein
|
|
|
|
|
24-167161
Rear BILSTEIN Shock Absorber - 3500 MOTORHOME 2002-2018
Two Required - Sold Individually
Motorhome shocks are longer than standard van shocks.
Heavy duty (High Pressure Gas) for most Sprinter based motor home with dual wheel rear axle. e.g. Winnebago View, Itasca Navion.
OVERALL LENGTH OF THIS SHOCK ABSORBER IS APPROXIMATELY 593 mm or 23.25 inches with both end bushings having 14mm holes. Some people report requiring an adapter sleeve to make these fit the original 12mm mounting bolt on the bottom end.
|
|
|
|
|
901 325 02 54
Rear Leaf Spring - Plate 2002-2006
Plate for the Rear Leaf Spring. These are Genuine Mercedes Benz.
This is sold as an individual unit, vehicle has one per side (2 total).
Goes with U-Bolt part number: 906 325 11 47
#65 in the drawing. |
|
|
|
|
000 990 00 59
Rear Leaf Spring - U Bolt Wheel Nut 2002-2006
Wheel Nut for the Rear Leaf Spring U bolt. These are Genuine Mercedes Benz.
This is sold as an individual unit, vehicle has four per side (8 total).
Goes with U-Bolt part number: 906 325 11 47 |
|
|
|
|
903 320 27 06
Rear Leaf Spring 2004-2006
Rear Leaf Spring for a 2004-2006 Sprinter ONLY.
These are Genuine Mercedes Benz. This is sold as an individual unit, vehicle has one per side.
CALL or EMAIL with VIN number to verify fitment, price, and part number! |
|
|
|
|
901 325 07 44
Rear Leaf Spring Buffer/Cushion 2002-2018
If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber cushions are worn and need replacement.
A total of four per vehicle are required, two per side.
|
|
|
|
|
901 324 03 50
Rear Leaf Spring Bushing 2500
If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement.
These press into the eyelet ends of each of the rear leaf springs. A total of four per vehicle are required, two per side.
2500 models only
|
|
|
|
|
000 321 02 50
Rear Leaf Spring Bushing 3500 2002-2018
For 3500 models only
If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of two per vehicle are required.
These are for the REAR position of the leaf spring. The front bushing is different.
|
|
|
|
|
611 324 03 50
Rear Leaf Spring Bushing 3500 2002-2018If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of two per vehicle are required.
These are for the FRONT position of the leaf spring. The rear bushing is different.
3500 models only
|
|
|
|
|
906 325 11 47
Rear Leaf Spring U Bolt 2002-2006
Rear Leaf Spring U bolt. These are Genuine Mercedes Benz. This is sold as an individual unit, vehicle has two per side.
There are two types. Check your current ones and measure the dimensions.
Dimensions: 10.5cm x 13cm x 2cm |
|
|
|
|
906 325 02 47
Rear Leaf Spring U Bolt 2002-2006
Rear Leaf Spring U bolt. These are Genuine Mercedes Benz. This is sold as an individual unit, vehicle has two per side.
There are two types. Check your current ones and measure the dimensions.
Dimensions: 10cm x 15cm x 1cm |
|
|
|
|
82 2434
Rear Shock Absorber - 2500 KONI 2002-2006
Fits all Sprinter 2500 models
Sold Individually - Order TWO if doing both sides of van.
Manufactured by Koni
|
|
|
|
|
341339
Rear Shock Absorber - 2500 KYB (Short WB) 2002-2006
Fits Sprinter 2500 with short (118") wheel base
MFG: KYB in Spain
Sprinters
with 15 inch wheels may experience "bottoming out" if you have a
sagging front transverse spring and worn suspension. Replacing the
shocks alone will not remedy this situation.
|
|
|
|
|
349001
Rear Shock Absorber-2500 KYB (Medium & Long WB) 2002-2006
Fits Sprinter 2500
MFG: KYB in Spain
|
|
|
|
|
82 2440
Rear Shock Absorber-3500 KONI 2002-2006
Fits all Sprinter 3500 models
Sold Individually - Order TWO if doing both sides of van.
Manufactured by Koni. |
|
|
|
|
344409
Rear Shock Absorber-3500 KYB 2002-2006
Fits Sprinter 3500
MFG: KYB (Spain)
|
|
|
|
|
901 322 22 19
Right Side Transverse Spring Seat 2002-2006
For the front transverse spring, 1 required
From spring to spring plate (lower)
|
|
|
|
|
901 322 00 84
Transverse Spring Block GREEN 2002-2006
For the front transverse spring, made of hard plastic and PALE GREEN in color
|
|
|
|
|
901 322 01 84
Transverse Spring Block RED 2002-2006
For the front transverse spring, made of hard plastic and RED in color
|
|
|
|
|
901 322 04 44
Transverse Spring Buffer/Bumper 2002-2006
Aka axle stop.
For front transverse spring, 2 are required. |
|
|