Sprinter Van - Eurovan - European Auto Parts
Shop By Category
SPRINTER GEN. I 2002-2006 (T1N)
SPRINTER GEN. II 2007-2018 (NCV3)
METRIS 2016-2020
EUROVAN 2001-2003
EUROVAN 1997-2000
EUROVAN 1992-1996
Shop By Category
Brake Calipers & Pads
2004-06 Turbo Resonator
2007-on Turbo Hose Adapter
A/C Warranty Info
Turbo Warranty Info

Control arm & bushings, stabilizer bar links
Tie rods, control arm & bushings, stabilizer bar links, drive shaft support
Wheel bearings, studs, lug nuts
Power steering pump, hoses, angle sensor, steering knuckle, rack boot kit, tie rods

901 398 12 27 2002-2006 Sprinter Ball Joint Kit ***FREE USA SHIPPING***
Rating: 0
Both lower OEM ball joints.


901 350 00 00 Differential Bearing Replacement Kit 2002-2006
Rating: 0
Contains pinion shaft seal and all bearings for the differential, along with spacers, bolts, and gland nut. 
Bearings will all be known brands, such as Timken, Koyo or SKF.

If your Sprinter is a late 2004, 2005 or 2006, nothing else will be required in this Kit, other than a cover gasket and replacement fluid.

If you have a 2002, 2003 or early 2004 model, then you will require a different spacer bushing and pinion shaft gland nut, See Below.

The spacer bushing in this Kit has the following dimensions:
  • 34mm ID
  • 21mm Length
Early models use a bushing with the following dimensions:  (see these below)
  • 32mm ID
  • 16mm Length
Differential cover seal is NOT included but is available and shown below.


601 351 00 72 Differential Pinion Shaft Nut 2002-Early 2004
Rating: 0
This nut needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential. 

Also, see the different spacer bushing also, shown below.

601 351 01 72 Differential Pinion Shaft Nut 2004-2006
Rating: 0
This nut for those Mid 2004-2006 T1N models. Picture is currently inaccurate, this nut has a taller collar.

108 353 00 42 Differential Spacer Bushing-32mm 2002-Early 2004
Rating: 0
This bushing needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential.

This spacer bushing's dimensions are:
32mm ID and 16mm Length

Also, see the different pinion shaft nut, shown below.