|
|
|
2002-2006 Sprinter 2500 BILSTEIN High Roof Strut/Shock Kit ***FREE USA SHIPPING***strut For cargo van models.
Set of all four shock absorbers, made by BILSTEIN in Europe.
2-Day Shipping to any US Zip Code included!
This item, due to the overall weight, cannot be shipped outside the US. Unless you are shipping to a US Zip Code, do not order this kit.
|
|
|
|
|
2002-2006 Sprinter 2500 BILSTEIN Low Roof Strut/Shock Kit ***FREE USA SHIPPING***strut For cargo van models.
Set of all four shock absorbers, made by BILSTEIN in Europe.
2-Day Shipping to any US Zip Code included!
This item, due to the overall weight, cannot be shipped outside the US. Unless you are shipping to a US Zip Code, do not order this kit.
|
|
|
|
|
2002-2006 Sprinter 2500 KYB High Roof Strut/Shock Absorber Kit ***FREE USA SHIPPING***strut Set of all four shock absorbers, made by KYB in Europe.
2-Day Shipping to any US Zip Code included!
This item, due to the overall weight, cannot be shipped outside the US. Unless you are shipping to a US Zip Code, do not order this kit.
|
|
|
|
|
2002-2006 Sprinter 2500 KYB Low Roof Strut/Shock Absober Kit ***FREE USA SHIPPING***strut Set of all four shock absorbers, made by KYB in Europe.
2-Day Shipping to any US Zip Code included!
This item, due to the overall weight, cannot be shipped outside the US. Unless you are shipping to a US Zip Code, do not order this kit.
|
|
|
|
|
2002-2006 Sprinter 3500 KYB High Roof Strut/Shock Kit ***FREE USA SHIPPING***strut
Set of all four shock absorbers, made by KYB in Spain
2-Day Shipping to any US Zip Code included!
This item, due to the overall weight, cannot be shipped outside the US. Unless you are shipping to a US Zip Code, do not order this kit.
|
|
|
|
|
Front BILSTEIN Strut Assembly 2500 & 3500 (High Roof) 2002-2006Fits all Sprinter High roof 2500 and 3500 models
MFG: Bilstein
2 Required, sold individually
Sprinters with 15 inch wheels may experience "bottoming out" if you have a sagging front transverse spring and worn suspension. Replacing the shocks alone may not remedy this situation.
|
|
|
|
|
Front BILSTEIN Strut Assembly 2500 & 3500 (Low Roof) 2002-2006Fits all Sprinter Low roof 2500 and 3500 models
MFG: Bilstein
Sprinters with the smaller diameter 15 inch wheels may experience "bottoming out" if you have a sagging front transverse spring and worn suspension. Replacing the shocks alone will not remedy this situation.
|
|
|
|
|
Front Strut 4WD Sprinter ONLY 2015-2018
Fits left or right side, 4 wheel drive models only.
These struts are much longer than the RWD models
|
|
|
|
|
Front Strut Assembly 2500 SACHS 2002-2006Fits all Sprinter 2500 models
MFG: SACHS/BOGE
|
|
|
|
|
Front Strut Assembly 2500/3500 KYB (High Roof) 2002-2006Fits Sprinter 2500 & 3500 models with high roof version
MFG: KYB
Sprinters
with 15 inch wheels may experience "bottoming out" if you have a
sagging front transverse spring and worn suspension. Replacing the
shocks alone will not remedy this situation.
|
|
|
|
|
Front Strut Assembly 2500/3500 KYB (Low Roof) 2002-2006Fits Sprinter 2500 & 3500 models with low roof version
MFG: KYB
|
|
|
|
|
Front Strut Assembly 3500 SACHS 2002-2006Fits all Sprinter 3500 models
MFG: SACHS/BOGE
TWO REQUIRED, SOLD INDIVIDUALLY
|
|
|
|
|
Front Strut Boot 2002-2006Front strut dust boot for all 2500 and 3500 models
Sold individually....order two if doing both sides
|
|
|
|
|
Front Strut Mount-Lower 2002-2006Lower front strut mount, fits both 2500 & 3500 models
Manufactured by Rein, part of the ContiTech/CRP automotive group |
|
|
|
|
Front Strut Mount-Upper 2002-2006Top front shock mount, fits both 2500 & 3500 models
Manufactured by Rein, part of the ContiTech/CRP automotive group
|
|
|
|
|
Front Transverse Leaf Spring 2002-2006 ++SOLD OUT++
Often found to be the cause of front end "bottoming out" problems. This composite spring will eventually sag or break in higher mileage vehicles, causing the van's front end to droop and cause a lot of suspension banging noises. |
|
|
|
|
Front Transverse Spring Seat 2002-2006For front of transverse spring, two are required. Also, see left and right lower seats shown below
From spring to axle beam/frame (upper)
|
|
|
|
|
Left Side Transverse Spring Seat 2002-2006For the front transverse spring, 1 required
From spring to spring plate (lower)
|
|
|
|
|
Rear BILSTEIN Shock Absorber-2500 CARGO VAN 2002-2006Fits all Sprinter 2500 cargo vans
MFG: Bilstein |
|
|
|
|
Rear BILSTEIN Shock Absorber-2500 MOTORHOME 2002-2018
TWO REQUIRED, SOLD INDIVIDUALLY
MOTOHOME SHOCKS ARE LONGER THAN STANDARD VAN SHOCKS
Heavy duty (High Pressure Gas) for most Sprinter based motor home with single wheel rear axle, e.g. Airstream Westfalia
OVERALL LENGTH OF THIS SHOCK ABSORBER IS APPROXIMATELY 560 mm or 22 inches with both end bushings having 14mm holes. Some people report requiring an adapter sleeve to make these fit the original 12mm mounting bolt on the bottom end.
|
|
|
|
|
Rear BILSTEIN Shock Absorber-2500 PASSENGER VAN 2002-2006Fits Sprinter 2500 passenger vans ONLY
MFG: Bilstein |
|
|
|
|
Rear BILSTEIN Shock Absorber-3500 MOTORHOME 2002-2018
TWO REQUIRED, SOLD INDIVIDUALLY
MOTOHOME SHOCKS ARE LONGER THAN STANDARD VAN SHOCKS
Heavy duty (High Pressure Gas) for most Sprinter based motor home with dual wheel rear axle. e.g. Winnebago View, Itasca Navion
OVERALL LENGTH OF THIS SHOCK ABSORBER IS APPROXIMATELY 593 mm or 23.25 inches with both end bushings having 14mm holes. Some people report requiring an adapter sleeve to make these fit the original 12mm mounting bolt on the bottom end.
|
|
|
|
|
Rear Leaf Spring Buffer/CushionIf you hear clacking noises in the area of your rear leaf springs, it may be that these rubber cushions are worn and need replacement.
A total of four per vehicle are required, two per side.
|
|
|
|
|
Rear Leaf Spring Bushing 2500If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of four per vehicle are required, two per side.
2500 models only
|
|
|
|
|
Rear Leaf Spring Bushing 3500 2002-2018If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of two per vehicle are required.
These are for the REAR position of the leaf spring. The front bushing is different.
3500 models only
|
|
|
|
|
Rear Leaf Spring Bushing 3500 2002-2018If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of two per vehicle are required.
These are for the FRONT position of the leaf spring. The rear bushing is different.
3500 models only
|
|
|
|
|
Rear Shock Absorber-2500 KONI 2002-2006Sold individually, order two if doing both sides of van.
Fits all Sprinter 2500 models
MFG: Koni. Priced each, two required. |
|
|
|
|
Rear Shock Absorber-2500 KYB (Medium & Long WB) 2002-2006Fits Sprinter 2500.
MFG: KYB in Spain
|
|
|
|
|
Rear Shock Absorber-2500 KYB (Short WB) 2002-2006Fits Sprinter 2500 with short (118") wheel base
MFG: KYB in Spain
Sprinters
with 15 inch wheels may experience "bottoming out" if you have a
sagging front transverse spring and worn suspension. Replacing the
shocks alone will not remedy this situation.
|
|
|
|
|
Rear Shock Absorber-3500 KONI 2002-2006Sold individually, order two if doing both sides of van.
Fits all Sprinter 3500 models
MFG: Koni |
|
|
|
|
Rear Shock Absorber-3500 KYB 2002-2006Fits Sprinter 3500
MFG: KYB (Spain)
|
|
|
|
|
Rear Shock Absorber-3500 OEM SACHS 2002-2006Fits Sprinter 3500
MFG: SACHS OEM SUPPLIER
|
|
|
|
|
Right Side Transverse Spring Seat 2002-2006For the front transverse spring, 1 required
From spring to spring plate (lower)
|
|
|
|
|
Transverse Spring Block 2002-2006For the front transverse spring, made of hard plastic and WHITE in color
|
|
|
|
|
Transverse Spring Block 2002-2006For the front transverse spring, made of hard plastic and RED in color
|
|
|
|
|
Transverse Spring Buffer/Bumper 2002-2006Aka axle stop. For front transverse spring, 2 are required
|
|
|
