Air induction hose from Turbocharger to Intercooler
ID of this hose at the intercooler connection is 54mm or 2 1/8 inches
This Hose is under very high boost pressure from the Turbocharger. When Installing this hose, clean all of the oil off of the fittings at each end very thoroughly prior to putting the hose in place. Using a degreaser, such as Simple Green, is suggested. Tighten the hose clamps at each end and bring the engine up to operating temperature. You should re-tighten the hose clamps several times after installation to insure that the hose does not blow off the fittings at some point in the future.
