|
|
|
906 598 00 82
2007-2009 3.0L V6 Charge Air Hose Kit ***FREE USA SHIPPING***
Includes the two charge air hoses used on both sides of the intercooler. The hose from the turbo to the intercooler and the hose from the intercooler to the engine.
|
|
|
|
|
906 598 00 82-MB
2007-2009 3.0L V6 Charge Air Hose Kit ***FREE USA SHIPPING***
|
|
|
|
|
642 090 70 80
2007-2009 3.0L V6 Turbocharger - NEW ORIGINAL
The is a Brand New, original Mercedes Benz/Garrett turbocharger (same unit as sold by a Mercedes, Freightliner or Dodge dealer).
This is a complete unit and includes the electronic actuator. A package of three gaskets, supplied by Garrett, is also included.
SEE REINZOADD PRODUCT BELOW...
|
|
|
|
|
55 8781 906
2007-2022 3.0L V6 - Turbocharger Actuator
These are made by Rotomaster and are only for 2007-2022 V6 turbochargers.
This actuator moves the variable vane mechanism on the turbocharger.
Before installing a new actuator, insure that the turbocharger vane linkage moves freely. Failure to do so will cause the new actuator to quickly burn out. (NO WARRANTY REPLACEMENT FOR THIS). |
|
|
|
|
906 598 01 82-AFT
2010 & LATER 3.0L V6 Charge Air Hose Kit
Includes the two charge air hoses used on both sides of the intercooler. The hose from the turbo to the intercooler and the hose from the intercooler to the engine.
If you are ordering for a 2019+ VS30 model, this hose kit only fits with this Intercooler. Check the part number on your vehicle. If you still do not know which hose you need, email us your VIN number for verification.
* Free USA Shipping Included *
|
|
|
|
|
642 090 89 80-STOCK
2010 & LATER 3.0L V6 Turbocharger - NEW ORIGINAL
Only for BlueTec Engines, 2010 and Later.
This is a Brand New Garrett Turbocharger. This version is the stock replacement unit and has a cast compressor wheel. It is a complete unit and includes the electronic actuator. For the upgraded billet version, CLICK HERE.
SEE REINZOADD PRODUCT BELOW...
THE ELECTRONIC BOX (TURBO VANE ACTUATOR) IS NOW AVAILABLE AS A SEPARATE PART, CLICK HERE. |
|
|
|
|
642 090 89 80-BILLET
2010 & LATER 3.0L V6 Turbocharger Upgraded Billet - NEW ORIGINAL
Only for BlueTec Engines, 2010 and Later - Not for models 2009 and Earlier.
This is a Brand New Garrett Turbocharger. It is a complete unit and includes the electronic actuator. This version is an upgraded replacement, and has a Machined from Stock compressor wheel for a longer life cycle.
SEE REINZOADD PRODUCT BELOW...
|
|
|
|
|
906 598 01 82-MB
2010-2019 3.0L V6 Genuine Mercedes - Charge Air Hose Kit
Includes the two charge air hoses used on both sides of the intercooler. The hose from the turbo to the intercooler and the hose from the intercooler to the engine.
IF you are ordering for a 2019+ VS30 model, this hose kit only fits with this Intercooler. Check the part number on your vehicle. If you still do not know which hose you need, email us your VIN number for verification.
* Free USA Shipping Included * |
|
|
|
|
651 090 63 80
2014-2016 2.1L 4 CYL Turbocharger NEW ORIGINAL
Only for 2.1L 4 Cyl
This is the original, complete two stage turbo unit, with both of the vacuum actuators. Manufactured by Borg Warner, the OEM supplier to Mercedes Benz for the 4 CYL Diesel engine. The same turbo as sold by a Mercedes dealer for roughly half the price.
SEE REINZOADD PRODUCT BELOW...
This is a Brand New unit and is sold outright. (No core deposit)
|
|
|
|
|
642 091 01 50
Ball Socket 3.0L V6 Diesel 2007 & LATER
Ball socket insert for linkage to intake manifold inlet (swirl) actuator.
|
|
|
|
|
642 090 61 37
Charge Air Elbow 2007-2021
Connects turbocharger output to turbo resonator
|
|
|
|
|
642 090 05 00
Charge Air Elbow 2010 & Later
Connects turbocharger output to turbo resonator
Only for 3.0L V6 engines 2010 and later
|
|
|
|
|
906 528 37 82-AFT
Charge Air Hose - Intercooler to Engine 2.1L 4Cyl 2014-2016Located after the intercooler, on left side of vehicle
|
|
|
|
|
906 528 37 82-MB
Charge Air Hose - Intercooler to Engine 2.1L 4Cyl 2014-2016 Genuine Mercedes
Located after the intercooler, on left side of vehicle
Genuine Mercedes part. |
|
|
|
|
906 528 26 82-AFT
Charge Air Hose - Intercooler to Engine 3.0L V6 Diesel 2010 & LATER
Located on the Passenger's side of the engine - This is the shorter of the two charge-air hoses. Seal rings are provided with hose.
This hose will fit all NCV3 model years and early VS30 models. IF you are ordering for a 2019 & Later models, carefully check the current intercooler and intercooler hose that you have to order the correct hose. This hose fits the passenger side for 2019 & Later models with the 907 501 17 00 Intercooler, which can be found here.
If you still do not know which hose you need, email us your VIN number for verification.
|
|
|
|
|
906 528 22 82-AFT
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2007-2009
Located on driver's side of engine. This hose is the longer one of the two charge air hoses. Seal ring and hose clamp are provided with this hose.
This is the newer and longer, upgraded hose, which supersedes 68013652AA
See the other related hose for the opposite side of the intercooler, shown below.
These hoses are also available as a set of two, for both sides, with Free USA Shipping. |
|
|
|
|
906 528 25 82-AFT
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2010 & LATER
This hose is located on Driver's side.
Fits both the 2007-2018 NCV3 and the 2019-2022 V6 with the OM642 engine configuration.
This hose is also available as a Kit of two, for both sides with Free USA Shipping, see below. |
|
|
|
|
906 528 25 82-VAICO
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2010 & LATER
This hose is located on Driver's side.
Fits both the 2007-2018 NCV3 and the 2019-2022 V6 with the OM642 engine configuration.
This hose is also available as a Kit of two, for both sides with Free USA Shipping, see below. |
|
|
|
|
021 997 66 45
Charge Air Hose Inside Seal Ring 2.1L 4 CYL 2014-2016Located only on the charge air hose on the output side (left side of vehicle) of the intercooler
This seal ring is fitted to one end, on the INSIDE of hose connection and is ONLY found on the engine end of this hose IOW, the farthest end from the turbocharger.
|
|
|
|
|
021 997 65 45
Charge Air Hose Inside Seal Ring 3.0L V6, 2.1L 4CYL & METRIS 2010-2020Located on the charge air hoses on the input and output side of the intercooler. (64MM DIAMETER, ABOUT 2 1/2 inches)
This black seal ring is fitted to one end, on the INSIDE of hose connection and are only used on BlueTec engines ONLY. The opposite end connection uses the green OUTSIDE seal shown below. (May be a black or green colored seal)
On a 2.1L 4 Cyl engine, there are three of these seals.
On a 2010 and later 3.0L V6 engine there are four of these seals.
|
|
|
|
|
028 997 45 48
Charge Air Hose Outside Seal Ring 3.0L V6 Diesel 2007 & LATER
Located on the charge air hose and can be on both the input and output sides of the intercooler.
This green seal ring is fitted to the OUTSIDE of the hose end.
These are used on both the BlueTec and non-BlueTec engines.
|
|
|
|
|
906 528 50 82-AFT
Charge Air Hose TYPE A - Turbocharger to Intercooler 2.1L 4Cyl 2014-2016
This is an AFTERMARKET HOSE. We also offer the Genuine Mercedes part here.
Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the longer version of the two different hoses.
|
|
|
|
|
906 528 50 82-MB
Charge Air Hose TYPE A-Turbocharger to Intercooler 2.1L 4CYL - Genuine Mercedes 2014-2016
Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the longer version of the two different hoses.
THIS HOSE IS ONLY FOR THOSE MODELS WITH STANDARD AIR CONDITIONING, WHICH HAS A SINGLE COMPRESSOR.
THE OTHER VERSION FOR DUAL A/C COMPRESSORS (ROOF MOUNTED A/C), IS SHOWN BELOW.
|
|
|
|
|
906 528 51 82
Charge Air Hose TYPE B - Turbocharger to Intercooler 2.1L 4 Cyl 2014-2016
Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with. This is the shorter version of the two different hoses.
|
|
|
|
|
906 528 03 82-AFT
Charge Air Hose-Intercooler to Engine 3.0L V6 Diesel 2007-2009
This hose is the shorter of the two charge air hoses and runs from the intercooler to the engine. Seal ring and hose clamp are provided with hose.
Located on passenger side of engine.
Manufactured by Rein Automotive, a division of Continental (CRP)
See the other related hose for the opposite side of the intercooler, shown below.
Not for BlueTec engines 2010 and later
|
|
|
|
|
642 090 59 37
Charge Air Intake Pipe 3.0L V6 2007 & LATER
Charge air intake line, upper end of this pipe joins the output side of the turbo resonator.
|
|
|
|
|
642 096 06 45
Charge Air Line Bracket #2 - 3.0L V6 Diesel 2007 & LATER
Often cracks from engine vibration.
There are numerous brackets and they possibly changed after 2010. It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering. The part# for this is 642 096 06 45 |
|
|
|
|
642 098 04 39
Charge Air Line Bracket #3 3.0L V6 Diesel 2007 & LATER
Bracket from turbo resonator to the aluminum charge air pipe.
This is the large, U-shaped steel bracket with a single bolt hole.
|
|
|
|
|
642 096 15 45
Charge Air Line Bracket #4 3.0L V6 Diesel 2007 & LATER
Bracket at aluminum charge air pipe.
There are numerous brackets on the 3.0L V6 engine and they possibly may have changed after 2010. |
|
|
|
|
642 016 03 38
Charge Air Line Bracket #5 3.0L V6 Diesel 2007 & LATER
There are numerous brackets and possibly changed after 2010.
It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering.
The part # for this is 642 016 03 38 |
|
|
|
|
906 490 00 42
DPF Band Clamp 3.0L V6 2010 & LATER
Interfaces with the DPF bracket, shown below
|
|
|
|
|
000 490 14 41
Exhaust / DPF Clamp - 65MM 2014-2016 4 CYL
Located at the joint at the OUTPUT end of the DPF, where it joints the pipe.
This clamp is for a 65MM OD tube (approx 76MM expanded).
This clamp is also used on 2014+ 2.1L 4 CYL engines
|
|
|
|
|
000 490 13 41
Exhaust Clamp - 60MM 2007-2018
This clamp is for a 60MM OD tube (approx 70MM expanded)
This clamp is used at the INPUT side of the 2007-2009 3.0L V6 DPF
|
|
|
|
|
906 995 02 02
Exhaust Clamp - 70MM 3.0L V6 2010 & LATER
This clamp is for a 70MM OD tube
Located at output side of catalytic converter to tailpipe
|
|
|
|
|
000 995 53 02
Exhaust Clamping Sleeve - 60MM 2007-2009 3.0L V6
Located at the joint between OUTPUT end of the DPF and the exhaust pipe.
This exhaust clamp is for a 60MM OD tube / pipe.
It is a clamping sleeve joint, with a clamp at each end of the sleeve.
|
|
|
|
|
642 141 01 00
Exhaust Y-Pipe Collector at Turbo 2007 & LATER
Cast iron Y-shaped collector pipe/manifold, from turbocharger to the exhaust manifolds.
Gaskets for this unit are shown below.
|
|
|
|
|
906 528 03 82-MB
Genuine Mercedes - Charge Air Hose-Intercooler to Engine 3.0L V6 Diesel 2007-2009
This hose is the shorter of the two charge air hoses and runs from the intercooler to the engine. Seal ring and hose clamp are provided with hose.
Located on passenger side of engine.
|
|
|
|
|
906 528 26 82-MB
Genuine Mercedes - Charge Air Hose-Intercooler to Engine3.0L V6 Diesel 2010 & LATER
Located on the Passenger's side of the engine - This is the shorter of the two charge air hoses. Seal rings are provided with hose.
This hose will fit all NCV3 model years and early VS30 models. IF you are ordering for a 2019 & Later models, carefully check the current intercooler and intercooler hose that you have to order the correct hose. This hose fits the passenger side for 2019 & Later models with the 907 501 17 00 Intercooler, which can be found here.
If you still do not know which hose you need, email us your VIN number for verification. |
|
|
|
|
906 528 22 82-MB
Genuine Mercedes - Charge Air Hose-Turbocharger to Intercooler 3.0L V6 Diesel 2007-2009
This hose is the longer one of the two charge air hoses. Seal ring and hose clamp are provided with this hose.
|
|
|
|
|
906 528 25 82-MB
Genuine Mercedes - Charge Air Hose-Turbocharger to Intercooler 3.0L V6 Diesel 2010 & LATER
This Genuine Mercedes hose is located on Driver's side.
This hose fits both the 2007-2018 NCV3 and the 2019-2022 V6 with the OM642 engine configuration.
To see the other related hose for the opposite side of the intercooler, CLICK HERE.
This hose is also available as a set of two, for both sides, see below. Free USA shipping on the two hose kit. |
|
|
|
|
000 997 67 01
Hollow Bolt - Turbocharger Oil Feed Line 5 CYL 2002-2006 & 4 CYL DIESELS
For oil feed line to turbocharger
This bolt requires TWO seal rings, one on each side of the banjo fitting, see below.
|
|
|
|
|
007603-010107*
Hollow Bolt Oil Feed Line Seal Ring 2014-2016 2.1L 4 CYL
TWO seal rings required to be used with each of the two hollow bolts at oil feed line into top of turbocharger. |
|
|
|
|
007603-010107
Hollow Bolt Seal Ring Turbocharger Oil Feed Tube 2002-2006 5 CYL & 2014-2016 4 CYL DIESELS
For hollow bolt at oil feed line to turbocharger.
2 of these seal rings are required for the hollow bolt. One for each side of the banjo fitting.
Related oil line parts are also shown below. |
|
|
|
|
906 501 02 01-NISSENS
Intercooler 2010-2018 V6 & 4 CYL 2014-2016
|
|
|
|
|
906 501 02 01-BEHR
Intercooler 2010-2018 V6 & 4CYL 2014-2016
Mahle is the OEM Supplier to Mercedes for this part.
|
|
|
|
|
906 501 01 01-MAHLE
Intercooler 3.0L V6 Diesel MAHLE 2007-2009
This intercooler is manufactured by Mahle, the OEM supplier to Mercedes for this part.
|
|
|
|
|
651 096 02 80
Lower Turbocharger Oil Return Line Gasket 2014-2016 2.1L 4 CYL ONLYOne required at junction between oil return line and the crankcase
|
|
|
|
|
906 501 01 01-NISSENS
NISSENS Intercooler 3.0L V6 Diesel 2007-2009
This intercooler is manufactured by Nissens in Denmark.
|
|
|
|
|
220 492 02 81
Seal Ring - Muffler and Pipe 3.0L V6 2007-2022
Exhaust Pipe Connector Gasket. (Also known as the Catalytic Converter Gasket)
This seal ring is used on 2007-2022 3.0L V6 engines.
|
|
|
|
|
000 492 09 81
Seal Ring - Turbocharger to Exhaust 2004-2006 5 CYL & 2014-2016 2.1L 4 CYL
Located at joint between the turbocharger and the front pipe at the clamp area
This seal ring is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL engines
|
|
|
|
|
642 140 00 00
Turbo Resonator 3.0L V6 Diesel 2007-2022
Only for OM642 3.0L V6 Turbodiesel engine
This is the most current revision of this item, which supersedes four earlier part numbers, all of which have been discontinued by Mercedes. This unit is located between the output side of the turbocharger and the aluminum charge air intake pipe.
The seal and o-ring on each end of this unit (as pictured below) are provided with the new resonator.
|
|
|
|
|
642 016 10 38
Turbo Resonator Bracket 3.0L V6 Diesel 2007 & LATERAluminum bracket that bolts directly to the turbo resonator.
There are numerous brackets and they possibly changed after 2010. It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering.
The part# for this is 642 016 10 38. |
|
|
|
|
019 997 75 45
Turbo Resonator O Ring Seal 3.0L V6 2007 & LATER
This O Ring is located at groove on the turbo resonator. Note that this is black in color.
IF YOU ARE ORDERING A NEW RESONATOR, YOU WILL NOT NEED TO ORDER THIS SEAL, AS IT IS FURNISHED WITH THE RESONATOR. |
|
|
|
|
642 094 00 51
Turbo Resonator Seal 3.0L V6 Diesel 2007-2022
Black silicone seal found at end of turbo resonator.
IF YOU ARE ORDERING A NEW TURBO RESONATOR, YOU WILL NOT NEED TO ORDER THIS AS IT IS FURNISHED WITH THE NEW RESONATOR. |
|
|
|
|
001 990 31 07
Turbo to Pedestal Bolt
This bolt is M8x35. |
|
|
|
|
55 9976 010
Turbocharger Additive - REINZOADD 2002 & LATER
To be used when installing any new turbocharger.
Squirt this tube into the oil feed inlet hole in the center cartridge to prevent damage due to oil starvation during initial start-up.
|
|
|
|
|
203 490 04 41
Turbocharger Exhaust Clamp TYPE 2 2004-2006 & 2014-2016 2.1L 4 CYL
Located at the joint between the turbocharger and the exhaust header pipe on 2004-2006 5 CYL engines and on the INPUT end of the DPF on 2004-2016 4 CYL engines.
This is the tapered design, which uses a thick sealing ring, see below... Compare to your original before ordering, as there are two different types for 5 CYL engines.
This clamp is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL (INPUT end of the DPF).
|
|
|
|
|
651 096 04 80
Turbocharger Flange Gasket 2014-2016 2.1L 4 CYL ONLYTurbocharger to exhaust gasket
|
|
|
|
|
642 142 07 81
Turbocharger Gasket - Oil Feed & Drain 3.0L V6 2007 & LATER
Bottom of turbocharger to turbocharger support stand
|
|
|
|
|
642 142 04 81
Turbocharger Gasket Y-Pipe Collector 2007 & LATER 3.0L V6
Located between Turbo and the cast iron Y-shaped connector that links the two exhaust manifolds together.
|
|
|
|
|
906 528 22 24
Turbocharger Intake Hose / Duct 3.0 V6 Diesel 2007 & LATER
Links the air filter housing and MAF (mass air flow) sensor to the turbocharger intake, directly in the center of the aluminum turbo housing.
The black seal ring at the turbocharger end is furnished with this hose.
If your old hose has the orange seal ring at the end, this hose will replace it.
This pipe/hose replaces both 906 528 02 24 and 906 528 15 24.
|
|
|
|
|
906 528 02 24
Turbocharger Intake Hose / Duct 3.0 V6 Diesel 2007-2009
Links the air filter housing and MAF (mass air flow) sensor to the turbocharger intake.
The orange seal at the turbocharger end is furnished with this hose.
|
|
|
|
|
023 997 85 48
Turbocharger Oil Feed Tube Seal Ring 2002-2006 5 CYL & 2014-2016 2.1L 4 CYL
Seal ring for oil feed line into center of turbocharger |
|
|
|
|
014 997 64 45
Turbocharger O-Ring Seal - 3.0L V6 2007-2022
This o-ring is located at the output end of the turbocharger (on the compressor side) located between turbocharger and aluminum charge air elbow.
Note that these seals are GREEN in color, signifying that they are made from VITON, a long lasting, heat resistant compound. The old seals were black neoprene and failed relatively quickly. |
|
|
|
|
017 997 04 45-ELRING
Turbocharger Seal Ring 2007-Mid 2010
Located at the center of the compressor side (aluminum section) on the end of the turbocharger.
Resides inside the large diameter plastic intake pipe. A clamp surrounds the end of this plastic hose/pipe.
This clamp should be very snug to avoid any boosted air leakage at this point.
|
|
|
|
|
017 997 04 45-MB
Turbocharger Seal Ring 2007-Mid 2010
Located at the center of the compressor side (aluminum section) on the end of the turbocharger.
Resides inside the large diameter plastic intake pipe. |
|
|
|
|
651 094 00 51
Turbocharger Seal Ring 2014-2016 2.1L 4 Cyl EngineLocated at the compressor side (aluminum section) on the intake end of the turbocharger.
Resides inside the large diameter plastic hose/pipe. A clamp surrounds the end of this plastic hose/pipe. This clamp should be very snug to avoid any air leakage at this point.
|
|
|
|
|
000 094 00 51
Turbocharger Seal Ring Mid 2010 & LATER
Manufactured by Elring in Germany. They are the OEM supplier to Mercedes. This is the identical part as those sold at a franchise dealer.
Located at the center of the compressor side (aluminum section) on the end of the turbocharger. Resides inside the large diameter plastic intake pipe.
A clamp surrounds the end of this plastic hose/pipe. This clamp should be very snug to avoid any boosted air leakage at this point. |
|
|
|
|
642 096 08 45
Turbocharger Support Bracket-3.0L V6 Diesel 2007 & LATER
Often cracks from engine vibration.
|
|
|
|
|
642 096 01 00
Turbocharger Support Stand / Base 2007 & LATER 3.0 V6
This cast iron pedestal sits under the 3.0L V6 turbocharger, and houses the very critical turbocharger oil feed and drain lines.
This is the third revision of this part, replacing:
642 096 03 45
642 096 14 45
|
|
|
|
|
642 142 06 81
Turbocharger Support Stand/Base Gasket 2007 & LATER 3.0L V6
Bottom of turbocharger support stand to engine.
|
|
|
|
|
219 492 00 80
Turbocharger to Exhaust Pipe Gasket 2007 & LATER 3.0L V6
From turbocharger output to exhaust header pipe
|
|
|
|
|
651 090 08 66
Turbocharger Vacuum Actuator #1 2014-2016 2.1L 4 CYLOnly for 4 CYL engines. This is the LARGER of the two vacuum actuators. See the smaller one shown below.
Includes the the threaded rod and mounting bracket.
|
|
|
|
|
651 090 01 66
Turbocharger Vacuum Actuator #2 2014-2016 2.1L 4 CYLOnly for 4 CYL diesel engines. This is the SMALLER of the two vacuum actuators. See the larger one shown below,
|
|
|
|
|
611 187 06 80*
Upper Turbocharger Oil Return Line Gasket 2014-2016 2.1L 4 CYL ONLY
Two required. One at each of the upper ends of the oil return pipe to the crankcase.
The lower gasket is shown below.
|
|
|
.png)
