|
|
642 990 29 07-FEBI KIT
2007 & LATER 3.0L V6 Diesel SPRINTER Fuel Injector Bolt Kit
Complete set of six stretch bolts and six lower injector seals.
Any time an injector is replaced, both the bolt and the seal must be replaced.
These two components should never be reused.
|
|
|
|
|
651 070 30 87
Diesel Fuel Injector - New 2.1L 4Cyl 2014-2016
Original New Factory Injector - For 2.1L 4 Cyl engines 2014-2016
|
|
|
|
|
642 070 12 87-BOSCH
Diesel Fuel Injector - New 3.0 V6 2010 & LATER
Original New Factory Injector - For BlueTec OM642.896, OM642.898 & OM642.899 V6 diesel engines 2010 & Later
Only for BluTec engines 2010 and later - Six Required, Sold Individually
|
|
|
|
|
642 070 13 01-NEW
Diesel Injection Pump NEW 3.0L V6 Diesel 2010-2022
OM 642.993 V6 diesel engine 2010 and Later
NOT for BlueTec engines 2007-2009
This is a New Bosch pump, the OEM supplier to Mercedes for this part. |
|
|
|
|
642 070 13 01-REMAN
Diesel Injection Pump REMAN / EXCHANGE 3.0L V6 Diesel 2010-2022
OM642.993 V6 diesel engine 2010-2022 Only.
NOT for BlueTec engines 2007-2009.
This is a remanufactured Mercedes Benz pump. It will be furnished in
either a Mercedes Benz or a Bosch box. In either case, these pumps are
remanufactured by Bosch, the original supplier to Mercedes Benz.
All returned cores must be complete, undamaged and fully assembled or they will not be accepted for refund. |
|
|
|
|
642 070 03 01
Diesel Injection Pump REMAN/EXCHANGE 3.0L V6 Diesel 2007-2009
OM 642.993 V6 diesel engine 2007-2009 models.
NOT for BlueTec engines 2010 and later.
This pump is remanufactured by Bosch, the original supplier to Mercedes Benz.
All returned cores must be complete, undamaged and fully assembled or they will not be accepted for refund.
|
|
|
|
|
LM2032
Diesel Injector Cleaner 2002 & Later
Diesel injection system cleaner - 500ml can
Removes deposits in the diesel injection system and in the combustion chamber. Increases the cetane number and improves the ignitability of the diesel fuel. Ensures the engine runs quietly. Protects against corrosion and wear. Optimizes the exhaust gas values and performance of the engine. Effect lasts up to 6000 miles.
|
|
|
|
|
906 900 67 02
Distance Control / Collision Assist Module
For vehicles with Distance control / Collision assist.
Replaces old part # 906-900-09-02
New part # is 906 900 67 02
|
|
|
|
|
005 153 23 28
Fuel & Oil Temperature Sender 2002 & LATER
2 contact pins, straight electrical connector.
Located on the injection pump on front of engine block on the 2.7L 5 CYL diesel engines.
Located near oil pan for the 3.0L V6 diesel engines.
|
|
|
|
|
651 070 15 95
Fuel Distribution Rail Assembly 2014-2016 2.1L 4 CYL
Fuel rail which connects to all four injectors. Both of the sensors, at each end of the rail, are included. Neither of these two sensors are available
individually. They are only sold as part of the entire fuel rail assembly.
Brand new, complete and original Bosch fuel rail. This is the exact same rail sold at a franchise Mercedes dealer at one third of their price.
|
|
|
|
|
651 070 39 81
Fuel Feed Line Assembly 2014-2016 2.1L 4CYL
Fuel feed line from fuel filter to the high pressure injection pump.
This is a 3-way hose, that includes the fuel pressure sensor.
|
|
|
|
|
651 074 00 84
Fuel Flow Control Valve 2014-2016 2.1L 4 CYLThis is the larger flanged valve piece, located on the injection pump held in place by two screws.
|
|
|
|
|
012 997 07 45
Fuel Injection Pump O Ring
Seal for OM612 and OM647 from 2002-2006 AND OM651 from 2014-2016 - 1 seal per engine.
|
|
|
|
|
642 078 00 80-OEM
Fuel Injection Pump O-Ring 2007 & LATER V6
Pump seal for 2010+ V6 engines. 1 seal per engine, green in color.
|
|
|
|
|
642 078 00 80-MB
Fuel Injection Pump O-Ring 2007 & LATER V6
Genuine Mercedes part - Pump seal for 2010+ V6 engines. 1 seal per engine, green in color.
|
|
|
|
|
651 070 29 87
Fuel Injector - NEW 2014-2016 2.1L 4 Cyl
Original new factory Mercedes injector
For OM 651 engine
Four required, sold individually.
No core deposit applies, as these are new.
|
|
|
|
|
642 070 15 87
Fuel Injector - NEW 3.0L V6 2007-2009
Original New Bosch Injector
For OM 642 V6 diesel engine / 2007-2009 models only (Not for BluTec 2010 and later)
Six required, sold individually
THESE INJECTORS ARE BRAND NEW AND NOT REMANUFACTURED AND AS SUCH, NO CORE DEPOSIT IS REQUIRED. |
|
|
|
|
642 070 12 87 80
Fuel Injector - REMAN / EXCHANGE 3.0L V6 2010 & LATER
Original Remanufactured / Exchange factory Bosch injector - For BlueTec OM 642.896, OM642.898 & 642.899 V6 diesel engine
A CORE DEPOSIT OF $100 PER INJECTOR WILL BE ADDED TO YOUR INVOICE. THIS DEPOSIT WILL BE REFUNDED UPON RETURN OF YOUR OLD REBUILDABLE INJECTOR.
All returned cores must be complete, undamaged and fully assembled or they will not be accepted for refund.
Only for BluTec engines 2010 and later
THESE ARE ALSO AVAILABLE NEW, SEE BELOW
|
|
|
|
|
611 016 07 38
Fuel Injector Retainer 2.7L 5CYL 2002-2006
5 cylinder engines ONLY
Made in Germany
|
|
|
|
|
642 016 00 38
Fuel Injector Retainer 2007 & LATER 3.0L V6
All 2007 and later 3.0L V6 Diesel engines
|
|
|
|
|
651 016 05 38
Fuel Injector Retainer 2014-2016 4 CYL ONLY
Only for the OM651 4 CYL engines
Use with T-50 stretch bolt shown below
|
|
|
|
|
000 990 29 07-FEBI
Fuel Injector Retainer Bolt 2002 & LATER 2.7L & 3.0L
These are manufactured by Febi-Bilstein, the OEM supplier to Mercedes.
T-40 Torx head screw - 6mm outer diameter - 79mm stretch bolt (24mm shank & 55mm thread).
Order 1 screw for each injector.
These bolts are to be tightened in two stages. Torque to 7 Nm (62 inch lbs), then an additional 90 degrees. |
|
|
|
|
000 990 29 07-MB
Fuel Injector Retainer Bolt 2002 & LATER 2.7L & 3.0L - Genuine Mercedes
These are Genuine Mercedes bolts.
T-40 Torx head screw - 6mm outer diameter - 79mm stretch bolt (24mm shank & 55mm thread).
Order 1 screw for each injector.
These bolts are to be tightened in two stages. Torque to 7 Nm (62 inch lbs), then an additional 90 degrees. |
|
|
|
|
001 990 26 07
Fuel Injector Retainer Bolt 2014-2016 4 CYL ONLY
T-50 Torx head 55mm stretch bolt
Order 1 screw for each injector
Only for the OM651 4 CYL engines
|
|
|
|
|
651 070 55 32
Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016 (FEMALE CONNECTORS)
*** Currently Out of Stock ***
Links all of the four injectors and returns surplus fuel back to the fuel tank.
THERE ARE TWO DIFFERENT VERSIONS OF THIS HOSE.
This unit has 4 FEMALE connectors. If you have 4 MALE connectors, See Below.
BEFORE ORDERING, EXAMINE YOUR LINE CAREFULLY, AS SOME CUSTOMERS HAVE ORDERED THE INCORRECT UNIT.
|
|
|
|
|
651 070 24 32
Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016 (MALE CONNECTORS)
Links all of the four injectors and returns surplus fuel back to the fuel tank.
THERE ARE TWO DIFFERENT VERSIONS OF THIS HOSE.
This unit has 4 MALE connectors. If you have 4 FEMALE connectors, see below.
BEFORE ORDERING, EXAMINE YOUR LINE CAREFULLY, AS SOME CUSTOMERS HAVE ORDERED THE INCORRECT UNIT.
|
|
|
|
|
642 070 56 32-MB
Fuel Injector Return Line Assembly 3.0L V6 - Genuine Mercedes 2007-2009
Genuine Mercedes Part
Links all of the six injectors and returns surplus fuel to the tank. None of the fittings on this assembly are sold individually - only the seal rings, as shown below.
See seal rings below, Six Required, one for each injector to seal each of the snap on connections of this hose. It is important to replace these at the same time to avoid leakage.
|
|
|
|
|
642 070 56 32-AFT
Fuel Injector Return Line Assembly 3.0L V6 2007-2009
Links all of the six injectors and returns surplus fuel to the tank.
None of the fittings on this assembly are sold individually - only the seal rings, as shown below.
See seal rings below, Six Required, one for each injector to seal each of the snap on connections of this hose. It is important to replace these at the same time to avoid leakage.
|
|
|
|
|
642 070 75 32
Fuel Injector Return Line Assembly 3.0L V6 2010-2013
Links all of the six injectors and returns surplus fuel to the tank.
None of the fittings on this assembly are sold individually, only the o-rings, as shown below.
See seal rings below, six required, one per each injector to seal each of the snap on connections of this hose.
|
|
|
|
|
642 070 81 32-MB
Fuel Injector Return Line Assembly 3.0L V6 2014 & LATER
Genuine Mercedes Part
Links all of the six injectors and returns surplus fuel to the tank. None of the fittings on this assembly are sold individually, only the o-rings, as shown below.
See seal rings below, Six required, one per each injector to seal each of the snap on connections of this hose.
|
|
|
|
|
642 070 81 32-BOSCH
Fuel Injector Return Line Assembly 3.0L V6 2014 & LATER
Original Bosch unit
Links all of the six injectors and returns surplus fuel to the tank. None of the fittings on this assembly are sold individually, only the o-rings, as shown below.
See seal rings below, Six required, one per each injector to seal each of the snap on connections of this hose.
|
|
|
|
|
642 070 08 00
Fuel Injector Supply Line 3.0L V6 2007 & LATER
Steel line from the either fuel rail to each of the six injectors.
These lines will often leak at either end, especially if they have been over-torqued.
Six required. one for each injector.
|
|
|
|
|
651 070 31 33
Fuel Injector Supply Line CYL 1 & 2 2014-2016 2.1L DieselSteel line from the either fuel rail to injectors # 1 and # 2 ONLY
Two Required - These lines will often leak at either end, especially if they have been over-torqued.
|
|
|
|
|
651 070 46 33
Fuel Injector Supply Line CYL 3 & 4 2014-2016 2.1L DieselSteel line from the either fuel rail to injectors # 3 and # 4 ONLY
Two Required - These lines will often leak at either end, especially if they have been over-torqued.
|
|
|
|
|
651 070 29 87 87
Fuel Injector-REMAN 2014-2016 2.1L 4 CylRemanufactured/Exchange factory Mercedes injector
For OM 651 engine
Four required, sold individually. A $50 core deposit will be added to each injector and will be refunded upon return of your rebuildable core.
All cores must be fully assembled or they will not be accepted.
|
|
|
|
|
642 070 15 87 80
Fuel Injector-REMAN/EXCHANGE 3.0L V6 2007-2009
Original Remanufactured/exchange factory Bosch injector
For OM 642 V6 diesel engine
2007-2009 models only (Not for BluTec 2010 and later)
Six required, sold individually
All returned cores must be complete, undamaged and fully assembled or they will not be accepted for refund.
THESE ARE ALSO AVAILABLE NEW, SEE BELOW
|
|
|
|
|
642 070 02 33
Fuel Line - Rail to Injector 2007-2009
Steel line connecting the fuel rail to each injector.
Six Required
These lines will often leak at either end, especially if it has been over-torqued.
|
|
|
|
|
000 153 95 13
Fuel Moisture Sensor 2004-2009
Located on top of fuel filter on 2004-2009 models
Three electrical contact pins inside the plug.
Threaded coupling on top does not come with the sensor, CLICK HERE. |
|
|
|
|
014 997 70 45
Fuel Pressure Control Valve Reseal Kit 2002-2003
Reseal kit for fuel control valve located at the firewall end of the fuel distribution rail.
This fits only the 2002-2003 models, with the OM612 engine.
2004 to 2006 OM647 five cylinder engines use a different fuel control valve.
|
|
|
|
|
906 470 36 94
Fuel Pump Tank Module - NO Heater Booster 2007-2017
Only for models without auxiliary heater booster.
Top of unit has two hose connections
See other unit below, for those vehicles with a heater booster.
This is a complete module, containing the pump, screen and the fuel tank sending unit.
The tank module seal at the top of the tank is not included but is available, and shown below
|
|
|
|
|
000 997 26 63
Fuel Purge Hose Coupling / Screw 2007 & LATER
Threads into the top of fuel filter moisture sensor for 2007 and later 3.0L V6 engines.
Used for attaching the fuel purge hose to the moisture sensor.
|
|
|
|
|
642 074 02 84
Fuel Quantity Control Valve 2007-2009
Located on the high pressure diesel injection pump on the front of the engine.
aka: Fuel Flow Control Valve or Solenoid - Has 90 degree plug connection. |
|
|
|
|
642 074 04 84
Fuel Quantity Control Valve 2010 & LATER
Located on the high pressure diesel injection pump on the front of the engine.
aka: Fuel Flow Control Valve or Solenoid
Has 90 degree plug connection
Used on injection pumps 642 070 09 01, 642 070 11 01 & 642 070 13 01
|
|
|
|
|
642 070 14 33
Fuel Rail Connecting Line 2007-2009Steel line connecting the left fuel rail to the right fuel rail.
This line will often leak at either end, especially if it has been over-torqued.
One required
|
|
|
|
|
642 070 09 00
Fuel Rail Connecting Line L to R 2007 & LATER
Steel line from the left fuel rail to the right fuel rail.
This line will often leak at either end, especially if it has been over-torqued.
One required
|
|
|
|
|
642 070 10 00
Fuel Rail Supply Line 2010 & LATER 3.0L V6
Also Known As: Fuel Delivery Line
Steel line from the high pressure injection pump to the fuel rail. This line will often leak at either end, especially if it has been over-torqued.
|
|
|
|
|
651 070 44 33
Fuel Rail Supply Line 2014-2016 2.1L 4 CYLaka Fuel Delivery Line
Steel line from the high pressure injection pump to the fuel rail.
This line will often leak at either end, especially if it has been over-torqued.
One required
|
|
|
|
|
642 070 07 00
Fuel Rail Supply Line 3.0L V6 2007-2009aka Fuel Delivery Line
Steel line from the high pressure injection pump to the fuel rail.
This line will often leak at either one of the ends, especially if it has been over-torqued.
One required
|
|
|
|
|
001 991 58 70
Fuel Return Line Retainer Clip 2002 & LATER
Located at top of each injector
|
|
|
|
|
000 078 05 80-BOSCH
Fuel Return Line Seal 3.0L V6 & 2.1L 4CYL DIESEL
1 required for each injector.
Replace these seals at the same time that you replace the fuel return line or you may have leakage.
Seals leak line (fuel return line) to each injector.
These are made by Bosch and are the identical seal ring sold at a Mercedes franchise dealer.
|
|
|
|
|
000 078 05 80-MB
Fuel Return Line Seal 3.0L V6 & 2.1L 4CYL DIESEL
1 required for each injector.
Replace these seals at the same time that you replace the fuel return line or you may have leakage.
Seals leak line (fuel return line) |
|
|
|
|
454 478 00 12
Fuel Tank Module Seal 2007-2018
Seals tank access port for fuel pump and/or sending unit (under threaded collar)
|
|
|
|
|
642 990 29 07-MB KIT
Genuine Mercedes - 2007 & LATER 3.0L V6 Diesel SPRINTER Fuel Injector Bolt Kit
Complete set of Six stretch bolts and Six lower injector seals.
Any time an injector is replaced, both the bolt and the seal must be replaced.
These two components should never be reused.
|
|
|
|
|
651 070 55 32-MB
Genuine Mercedes - Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016
Links all of the four injectors and returns surplus fuel back to the fuel tank.
THERE ARE TWO DIFFERENT VERSIONS OF THIS HOSE.
This unit has 4 FEMALE connectors. If you have 4 MALE connectors, See Below.
|
|
|
|
|
642 070 21 95
Left Fuel Distribution Rail 2007-2009 3.0L V6
Left or Driver's side rail
The fuel control valve with the 90 degree connection is only available with the fuel rail and is included.
|
|
|
|
|
642 070 27 95
Left Fuel Distribution Rail 2010-2022 3.0L V6
Driver's side rail. Includes Fuel Control Valve on end of rail.
The fuel control valve (642 070 02 46) with the 90 degree connection is only available with the fuel rail.
|
|
|
|
|
611 017 00 60
Lower Fuel Injector Seal Ring 2002 & LATER
OEM Bosch fuel injector seal - Lower copper seal at tip of injector.
One required for each injector nozzle.
|
|
|
|
|
009 153 34 28
Pressure Gauge Converter 2010-2018For boost pressure in charge-air cross-over pipe
|
|
|
|
|
642 070 25 95
Right Fuel Distribution Rail 2007-2009 3.0L V6Right or Passenger's side rail
Includes the straight electrical fuel pressure sensor at back end of the rail. |
|
|
|
|
642 070 30 95
Right Fuel Distribution Rail 2010-2022 3.0L V6
Right side or Passenger's side
|
|
|
|
|
611 078 00 71
Water / Fuel Bleed Screw 2002-2018
Located on side of fuel filter, at bottom of canister on 2002-2003 models.
Located on top of fuel filter moisture sensor for 2004-2006 models.
Located on fuel hose and fuel filter for 2007 and later models. (2007-2009 V6 diesels use a different coupling on top, see below)
Used for bleeding any water and /or air from fuel filter and fuel system.
|
|
|
