Home


Advanced Search



	SPRINTER GEN. I 2002-2006 (T1N)
	SPRINTER GEN. II 2007-2018 (NCV3)
	SPRINTER GEN. III 2019-2024 (VS30)
	METRIS 2016-2023
	EUROVAN 2001-2003
	EUROVAN 1997-2000
	EUROVAN 1992-1996



Brake Calipers & Pads
2004-06 Turbo Resonator
2007-on Turbo Hose Adapter
A/C Warranty Info
Turbo Warranty Info



Shock Absorber Guide
VIN Number Guide
A/C Warranty Info

SPRINTER GEN. II 2007-2018 (NCV3)

Chemicals, Tools, and Hardware

Hardware

000 990 69 03 EGR Pipe Bolt 2007 & LATER

M6 X 16MM COPPER COATED

Sold Individually

Used on all EGR pipe flanges (EGR Return Line Bolt)

$2.78

Hose Clamp 13 mm-Fuel Injection 2002-2014

21013 Fuel Injection Hose Clamp 13mm 2002 & LATER

Clamping Range 12.5 - 14mm

These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.

If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......

2002-2003 Sprinter...................... Order 4 x 13mm clamps
2004-2006 Sprinter...................... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter...................... Order 6 x 13mm clamps & 6 x 15mm clamps

$1.46

Hose Clamp 15 mm-Fuel Injection 2002-2014

21015 Fuel Injection Hose Clamp 15mm 2002 & LATER

Clamping Range 13.5-15.5mm

These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.

If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......

2002-2003 Sprinter........... Order 4 x 13mm clamps
2004-2006 Sprinter........... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........... Order 6 x 13mm clamps & 6 x 15mm clamps

$1.48

Hose Clamp 17 mm-Fuel Injection 2002-2014

21017 Fuel Injection Hose Clamp 17mm 2002 & LATER

Clamping Range 16-18mm

These are special fuel hose clamps with rolled edges and no open serrations so, the clamp will not cut into the hose

If you are replacing replacing all of the original Mercedes factory "Clic" style clamps on a ......
2002-2003 Sprinter........................order 4 x 13mm clamps
2004-2006 Sprinter........................order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........................order 6 x 13mm clamps & 6 x 15mm clamps

$1.55

000000-001527 General Interior Screw 2007 & Later

This is a general interior screw for various interior trim items and plastic pieces and is used throughout the Sprinter vehicle.

The head is a T20 Torx and is about 1/2" (12MM) in length.

$1.91

000000 005888 Hose Clamp 60-80mm

Clamping Range is 60-80mm (12mm width).

Genuine Mercedes part.

$5.85

006 997 60 90 Loom Tie 70-90mm

Loom Tie - Hose Clamp with Worm Drive.

(aka Air Pipe Clamp, Boot Clamp, Inter-Cooler Pipe Clamp, Engine Air Duct Clamp, Outlet Hose Clamp, Air Hose Clamp, & Air Tube Clamp)

Air Intake Pipe to Mass Air Flow Sensor.

Clamping Range is 70-90mm.

Replaces 120 995 04 01, 916002 088100 and 916026 070000.

$12.84

910105-012016 M10 X 50MM BOLT -ZINC PLATED HEX HEAD

Strength rating 10.9

Sold individually

Used for motor mounts on 2002-2006 models. One bolt for each engine mount is required.

$7.84

000000-001159 M6 X 20MM BOLT - ZINC PLATED TORX HEAD

M6 X 20MM

Sold Individually

Used on all SPRINTERS

$2.97

910143-008017 M8 X 55MM BOLT - ZINC PLATED TORX HEAD

M8 X 55MM

Sold individually

Used on all SPRINTERS

$2.27

000000-003120 Rear Grab Handle Bolt

For Rear grab handles.

$4.84

001 990 93 03 Screw with Round Hexal Head 2007 & LATER

High Pressure Fuel Pump stretch hold-down bolts.

M7x35 - Injection pump to cylinder head.

Sold Individually.

$3.00

004 990 35 12 Transmission Pan Bolt 2014-2016 SPRINTER 4 CYL & METRIS 2016+

Aluminum Torx head "stretch bolt".
Mercedes Benz suggests not re-using these when changing your A/T filter

Six required, sold individually
Used ONLY on A/T's for 4 CYL engine models, both Sprinter and Metris.

$1.45