SPRINTER VAN - EUROVAN - EUROPEAN AUTO PARTS
 
Advanced Search
Shop By Category
SPRINTER GEN. I 2002-2006 (T1N)
SPRINTER GEN. II 2007-2018 (NCV3)
SPRINTER GEN. III 2019-2024 (VS30)
METRIS 2016-2023
EUROVAN 2001-2003
EUROVAN 1997-2000
EUROVAN 1992-1996
 
Shop By Category
Brake Calipers & Pads
2004-06 Turbo Resonator
2007-on Turbo Hose Adapter
A/C Warranty Info
Turbo Warranty Info
 
 
SPRINTER GEN. I 2002-2006 (T1N)
»
Chemicals, Tools, and Hardware
»
Hardware

 
 910143-008006 Bolt M8 X 40MM
Rating: 0

Also used as attachment screws (6 Required) for updated oil cooler / oil filter housing
$3.50
 
 601 351 00 72 Differential Pinion Shaft Nut 2002 - Early 2004
Rating: 0

This nut needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential. 

Also, see the different spacer bushing also, shown below.
$8.13
 
 601 351 01 72 Differential Pinion Shaft Nut 2004-2006
Rating: 0

This nut for those Mid 2004-2006 T1N models with a taller collar.
$11.27
 
 108 353 00 42 Differential Spacer Bushing - 32mm 2002-Early 2004
Rating: 0

This bushing needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential.

This spacer bushing's dimensions are:
32mm ID and 16mm Length

Also, see the different pinion shaft nut, shown below.
$10.69
Hose Clamp 13 mm-Fuel Injection 2002-2014
  
 21013 Fuel Injection Hose Clamp 13mm 2002 & LATER
Rating: 0

Clamping Range 12.5 - 14mm

These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.

If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......

2002-2003 Sprinter...................... Order 4 x 13mm clamps
2004-2006 Sprinter...................... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter...................... Order 6 x 13mm clamps & 6 x 15mm clamps
$1.46
Hose Clamp 15 mm-Fuel Injection 2002-2014
  
 21015 Fuel Injection Hose Clamp 15mm 2002 & LATER
Rating: 0

Clamping Range 13.5-15.5mm

These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.

If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......

2002-2003 Sprinter........... Order 4 x 13mm clamps
2004-2006 Sprinter........... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........... Order 6 x 13mm clamps & 6 x 15mm clamps
$1.48
Hose Clamp 17 mm-Fuel Injection 2002-2014
  
 21017 Fuel Injection Hose Clamp 17mm 2002 & LATER
Rating: 0

Clamping Range 16-18mm

These are special fuel hose clamps with rolled edges and no open serrations so, the clamp will not cut into the hose

If you are replacing replacing all of the original Mercedes factory "Clic" style clamps on a ......
2002-2003 Sprinter........................order 4 x 13mm clamps
2004-2006 Sprinter........................order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........................order 6 x 13mm clamps & 6 x 15mm clamps
$1.55
Hose Clamp 13 mm-Fuel Injection 2002-2014
  
 006 997 18 90 Hose Clamp - Feed Line 2002 & LATER
Rating: 0

Clamping Range 13-14.5mm

These are special hose clamps manufactured by Mercedes.
$5.69
 
 000000 005888 Hose Clamp 60-80mm
Rating: 0

Clamping Range is 60-80mm (12mm width).

Genuine Mercedes part.
$5.85
 
 006 997 60 90 Loom Tie 70-90mm
Rating: 0

Loom Tie - Hose Clamp with Worm Drive.


(aka Air Pipe Clamp, Boot Clamp, Inter-Cooler Pipe Clamp, Engine Air Duct Clamp, Outlet Hose Clamp, Air Hose Clamp, & Air Tube Clamp)


Air Intake Pipe to Mass Air Flow Sensor.


Clamping Range is 70-90mm.


Replaces 120 995 04 01, 916002 088100 and 916026 070000.
$12.84
 
 906 990 00 07 Lug Bolt - Alloy Wheel 2500 2002 & LATER
Rating: 0

Sold in increments of 1

Shank is approximately 52mm long.

20 are required for 2002-2006 models
24 are required for 2007 and later models

Only for aluminum alloy wheels on 2500 and 1500 models.
$7.71
Lug Bolt-Steel Wheel 2002-2006
  
 901 401 00 70 Lug Bolt - Steel Wheel 2002-2006
Rating: 0

Front or Rear - Sprinter 2500 with steel wheels.

Front Only - Sprinter 3500 with steel wheels.

Shank is approximately 33mm long.

Sold in increments of 1 each.
$3.97
Lug Nut-Steel Wheel 3500 2002-2006
  
 074361-014205 Lug Nut - Steel Wheel 3500 2002-2006
Rating: 5
(1)

Sold individually, 6 are required for each wheel, for a total of 24 per vehicle.

Only for steel wheels on 3500 models.
$3.15
 
 910143-006005 M6 x 35mm - Oil Pan Bolt
Rating: 0

This is the M6 x 35mm bolt used for the Oil pan to the crankcase. One of two types of bolts required for securing the oil pan. 
$3.50
 
 000000-000276 M8 X 20 MM BOLT - ZINC PLATED TORX HEAD
Rating: 0

M8 X 20MM

Sold Individually

Used on all SPRINTERS
$4.34
 
 309 402 02 71 Rear Wheel Stud - 3500 2002-2006
Rating: 0

For Rear hub on 3500 models ONLY
Total length is 65 mm or approx 2.5 inches (shank is 57 mm).
$9.83
 
 11050 Type A Hose Clamp 38-50mm
Rating: 0

Clamping Range 38-50mm

Made in Sweden - High quality Rolled clamp edge and smooth inside band will not cut into the hose. 
$3.84
 
 11056 Type B Hose Clamp 44-56mm
Rating: 0

Clamping Range 44-56mm

Made in Sweden - High quality Rolled clamp edge and smooth inside band will not cut into the hose. 
$3.97
 
 11065 Type C Hose Clamp 50-65mm
Rating: 0

Clamping Range is 50-65mm.

Made in Sweden - High quality Rolled clamp edge and smooth inside band will not cut into the hose. 
$3.91
 
 11044 Type D Hose Clamp 32-44mm
Rating: 0

Clamping Range 32-44mm

Made in Sweden - High quality Rolled clamp edge and smooth inside band will not cut into the hose. 
$2.96

 



Copyright © 1985-2024 Europarts.  All Rights Reserved.
Order Management System by Pulse Commerce