|
|
639 528 00 71
Air Filter Housing Screw V6 & 4 Cyl
For air filter housing cover, fits all V6 and 4 cylinder models. |
|
|
|
|
642 091 01 50
Ball Socket 3.0L V6 Diesel 2007 & LATER
Ball socket insert for linkage to intake manifold inlet (swirl) actuator.
|
|
|
|
|
642 090 59 37
Charge Air Intake Pipe 3.0L V6 2007 & LATER
Charge air intake line, upper end of this pipe joins the output side of the turbo resonator.
|
|
|
|
|
642 038 35 71
Connecting Rod Bolt 3.0 V6 Diesel 2007 & LATER
Twelve required (2 bolts per connecting rod), sold individually
|
|
|
|
|
642 030 06 03
Crankshaft Pulley / Vibration Damper 3.0 V6 2007 & LATER
Only for OM642 Turbodiesel engine, AKA HARMONIC BALANCER
Standard pulley/damper for models with or without roof A/C (Dual A/C compressors)
ALWAYS REPLACE THE CRANKSHAFT BOLT AT THE SAME TIME AS THE PULLEY
|
|
|
|
|
642 010 18 20
Cylinder Head Gasket Set Sprinter 3.0L V6 2007 & LATER
Complete upper gasket set including both head gasket sets and all other gaskets and seals associated with both cylinder heads.
Manufactured by Elring, OEM gasket supplier to Mercedes for this part.
|
|
|
|
|
003 990 25 22
Cylinder Headbolt Set - 204mm 3.0L V6 Diesel 2007 & LATER
M8, 204mm (approx 8 inches long) cylinder head bolt, 8 per cylinder head. Order two sets if doing both heads.
Sold as a set of 8.
|
|
|
|
|
642 010 08 67
Engine Cover 3.0L V6 2007 & LATERPlastic cover on top of V6 Sprinter engine. Metal heat shield on the underside is included.
|
|
|
|
|
642 094 07 85
Engine Cover Grommets - V6 and 4Cyl
Plastic engine cover grommets, fits the 3.0L V6 and the 2.1 4cyl engines
|
|
|
|
|
906 241 17 13
Engine Mount - 3.0 V6 Diesel Engine 2007 & LATER
2 required, Fits both Left and Right side
Sold in increments of 1
Used only on V6 turbodiesel engines
|
|
|
|
|
642 050 05 27
Exhaust Valve-3.0L V6 Diesel 2007 & LATERExhaust valve sold individually, 12 required for OM642 engine
|
|
|
|
|
642 030 05 12
Flex Plate/Ring Gear-3.0L V6 Diesel 2007 & LATERLocated between end of crankshaft & torque converter (bolts to face of torque converter)
AKA starter ring gear
|
|
|
|
|
000000-005724
Front Crankshaft Bolt 3.0L V6 2007 & LATER
Located in center of crankshaft pulley. Secures pulley to front of crankshaft.
|
|
|
|
|
023 997 84 47-MB
Front Crankshaft Seal 2.7L & 3.0 V6 2002 & LATER - Genuine Mercedes
Fits all Sprinter 2.7L I-5 and V6 diesel engines.
Genuine Mercedes part. |
|
|
|
|
023 997 84 47-ELRING
Front Crankshaft Seal 2.7L & 3.0L V6 2002 & LATER - Elring
Fits all Sprinter 2.7L I-5 and V6 diesel engines. |
|
|
|
|
000 997 19 08
Front Crankshaft Seal Sprinter 2019+ & Metris 2016+
Only for 4 CYL gasoline engines
|
|
|
|
|
604 990 00 40
Front Crankshaft Washer 2002 & LATER
Located at front crankshaft pulley between the bolt and the pulley.
Used on all five cylinder and V6 engines
|
|
|
|
|
642 010 00 33
Front Timing Cover 2007 & LATER 3.0L V6 DieselCovers the front of the engine, houses the timing chain and guides. Includes the front crankshaft seal.
|
|
|
|
|
000 010 16 85-MB
Genuine Mercedes Oil Fill Cap - SPRINTER 2002 & LATER + METRIS 2016+
Oil fill cap in valve cover or at end on extension tube on later V6 engines
|
|
|
|
|
642 050 00 80
Hydraulic Valve Lifter/Cam Follower 3.0L V6 2007 & LATERCam follower or valve lifter
4 per cylinder or 24 total, per engine
Sold in increments of 1 each |
|
|
|
|
642 098 00 37
Intake Pipe Socket 3.0L V6 DIESEL - 2007 & LATER
Furnished with both o-rings, which are not available as a separate item.
|
|
|
|
|
642 016 51 20
Left Cylinder Head Gasket 3.0 V6 Diesel 2007 & LATER
Head gasket for the Left or Driver's side cylinder bank
|
|
|
|
|
642 010 14 28
Lower Engine Oil Pan 2007 & LATER 3.0L V6
Fits the 3.0 Liter V6 diesel
This pan is cast aluminum, silver in color.
There is no gasket used for this oil pan. Use liquid sealant.
|
|
|
|
|
642 033 19 01-25mm O/S
Main Bearing Set - 1ST RPR 75.75mm 3.0L V6 Diesel 2007 & LATER
1st Repair Size .25mm oversize OR 75.75mm, for undersize ground crankshaft.
Complete set of all four bearing shell pairs (8 shells in total).
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 033 19 01-STD SIZE
Main Bearing Set-STD 76mm 3.0L V6 Diesel 2007 & LATER
Complete set of all four bearing shell pairs in STANDARD SIZE 76.00mm (8 shells in total)
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 011 02 71
MAIN CAP BOLT - 3.0L V6 Diesel 2007 & LATER
13 REQUIRED
|
|
|
|
|
642 011 03 71
MAIN CAP BOLT - 3.0L V6 Diesel 2007 & LATER
3 REQUIRED
|
|
|
|
|
910105-010011
MAIN CAP BOLT- 3.0L V6 Diesel 2007 & LATER
8 REQUIRED
|
|
|
|
|
642 180 99 00
Oil Cooler Change Gasket / Seal Kit 2007 & LATER 3.0L V6 Diesel
All necessary seals and gaskets required to change out the engine oil cooler.
All items in this kit are a combination of Genuine Mercedes and OEM supplied gaskets from Elring and Reinz.
A few other gaskets and seal rings that you may want to consider changing are listed below. |
|
|
|
|
000 010 16 85-AFT
Oil Fill Cap - SPRINTER 2002 & LATER + METRIS 2016+
Oil fill cap in valve cover or at end on extension tube on later V6 engines
|
|
|
|
|
000 993 69 20
Oil Pump Chain Tensioning Spring 2007 & LATER 3.0L V6
Tensioning spring for oil pump drive chain slide rail
|
|
|
|
|
642 181 00 80
Oil Pump Seal-2007 & LATER 3.0L V6Seal between engine block and oil pump
|
|
|
|
|
642 030 00 24
Piston Ring Set 3.0L V6 Diesel 2007 & LATER
Standard size (83.00mm bore) piston ring set for one piston. (Oversize rings are not available)
Sold as an individual set for one piston, six sets required per engine.
|
|
|
|
|
642 030 12 17 54-.50mm O/S
Piston-1ST RPR 83.50mm, RIGHT SIDE 3.0L V6 2007 & LATER1st repair size piston 83.50mm for 3.0L V6 Diesel engine, RIGHT CYLINDER BANK ONLY
Furnished with rings, pin and pin retainer clips.
Sold individually, three required.
Also available in Standard size.....See below
|
|
|
|
|
642 030 13 18 54-.50mm O/S
Piston-1ST RPR 83.50mm, LEFT SIDE 3.0L V6 2007 & LATER1st repair size piston 83.50mm for 3.0L V6 Diesel engine, LEFT CYLINDER BANK ONLY
Furnished with rings, pin and pin retainer clips.
Sold individually, three required.
Also available in Standard size.....See below
|
|
|
|
|
642 030 15 17 54-STD
Piston-STANDARD 83.00mm, LEFT SIDE 3.0L V6 2007 & LATER
+++ CURRENTLY SOLD OUT +++
Standard size piston (83.00mm) for 3.0L V6 Diesel engine, LEFT CYLINDER BANK ONLY.
Furnished with rings, pin and 2 pin retainer clips. Sold individually, Three required.
Also available in 1st repair, .25 mm O/S - See Below. |
|
|
|
|
642 030 12 17 54-STD
Piston-STANDARD 83.00mm, RIGHT SIDE 3.0L V6 2007 & LATER
Standard size (83.00mm) piston for 3.0L V6 Diesel engine, RIGHT CYLINDER BANK ONLY
Furnished with rings, pin and pin retainer clips. Sold individually, THREE required.
Also available is 1st repair, .25 mm O/S..... See below.
|
|
|
|
|
642 010 02 14
Rear Crankshaft Seal & Housing 3.0 V6 2007 & LATER
Rear crank seal, complete with housing.
This product is from Elring, an original equipment manufacturer for Mercedes.
The rear seal is also available by itself.....see below.
|
|
|
|
|
642 010 02 14-SEAL
Rear Crankshaft Seal 3.0 V6 2007 & LATER
Rear crank seal only, without housing.
Also available with the housing, see below.
|
|
|
|
|
D 176 404 A2
REINZOSIL Sealing Compound - All Models
Reinzosil compound 70 ml tube
Used for engine oil pans (upper or lower), front timing covers, valve covers, front sealing flange, etc. Any application where a seal is necessary but, there is no fiber, rubber, nor metal gasket.
Resistant to mineral and synthetic oils, gasoline, diesel, lubricants, greases, sunlight, ozone, water, and seawater. (Anthracite Colored) Temperature Range: -50 deg. C to +250 deg. C (briefly to +300 deg. C) |
|
|
|
|
642 016 52 20
Right Cylinder Head Gasket 3.0 V6 Diesel 2007 & LATER
Contains head gasket for the Right or Passenger's side cylinder bank
|
|
|
|
|
642 050 01 33
Rocker Arm 3.0L V6 Diesel 2007 & LATERSold individually, 24 per engine
|
|
|
|
|
642 030 02 60-.25mm O/S
Rod Bearing Set - 1ST RPR 63.75mm 3.0L V6 Diesel 2007-2022
1st repair size (.25mm oversize or 63.75mm) for undersize ground crankshaft.
Complete set of all six pair of bearing shells (12 shells total).
Dealer sells these as individual pairs. We sell them in a complete set of six pairs.
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 030 02 60-STD SIZE
Rod Bearing Set - STD 64mm 3.0L V6 Diesel 2007 & LATER
Standard size 64mm diameter
Complete set of all six pair of bearing shells (12 shells total). Dealer sells these as individual pairs.
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 030 02 60-STD SIZE MB
Rod Bearing Set-STD 64mm 3.0L V6 Diesel 2007 & LATERStandard size 64mm diameter
Sold as one PAIR - For complete set, you need 6 PAIRS.
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 030 00 62
Thrust Bearing Set-STD 3.0L V6 Diesel 2007 & LATER
2.15mm/Standard
Look at main bearing cap 642 011 02 11 and remove the thrust bearing halves.
These are furnished as a set of both upper and lower halves (four bearing halves)
The photo only shows 50% of what you will receive.
The thrust bearings limit the horizontal forward & backward travel of the crankshaft
|
|
|
|
|
000 993 71 76 L
Timing Chain - SINGLE ROW WITH LINK 3.0L V6 Diesel MID 2014 & LATER
SINGLE ROW TIMING CHAIN for later model 3.0L V6 Diesel engines.
This chain has a master link. See continuous chain version below.
|
|
|
|
|
642 050 03 11
Timing Chain Tensioner-3.0L V6 Diesel 2007 & LATER
Only for OM 642 3.0L V6 turbodiesel engine
This chain tensioner is used on both double row chains and single row chains.
The chain and chain guides are different but, the tensioner is the same.
|
|
|
|
|
642 230 00 65
Vacuum Pump 2007 & LATER 3.0L V6 Diesel
Mounted to cylinder head. This pump is manufactured by Pierburg, the original supplier to Mercedes.
For gasket between pump and engine, see below
|
|
|
|
|
642 016 02 80
Vacuum Pump Gasket 2007 & LATER
For 3.0L V6 vacuum pump, See Below.
|
|
|
|
|
000 053 51 58
Valve Stem Seal Kit 3.0L V6 Diesel 2007 & LATER
1 kit is required for each cylinder.
Sold in increments of 1.
Order six kits if you are doing the entire engine.
|
|
|
|
|
006888-005012
Woodruff Key for Crankshaft Pulley 2007 & LATER 3.0L V6
Only for OM642 V6 3.0 L
|
|
|
