|
|
005 153 13 28
Camshaft Position Sensor 2002 & LATER
3 pin connector, O ring seal included.
5 Cylinder Engines: Located on top of the cam cover (back end of cover) and under the black plastic cosmetic cover that sits on top of the cam cover.
Latest revision of this part, Manufactured by VNE
Automotive, the OEM supplier to Mercedes.
|
|
|
|
|
642 905 00 00
Crankshaft Position Sensor - 3 Pin 2007-Mid 2011
aka Reference Mark Sensor
Three electrical contacts inside the plug connector.
Located at flywheel end of crankshaft |
|
|
|
|
276 905 15 00
Crankshaft Position Sensor - 3 Pin Mid 2011+ V6 & 2014-2016 2.1L 4 CYL
Delphi is the OEM supplier to Mercedes for this part.
This sensor is used on later model V6 engines and all 2.1L 4 Cyl models.
Three electrical contacts inside the plug connector.
Old part# was 276 905 12 00 now superseded by 276 905 15 00 and now superseded by 276 905 14 00 |
|
|
|
|
000 905 43 05
EGR Temperature Sensor #3 3.0L V6 Diesel 2007 & LATER
Located at front of engine near the EGR valve.
Note that the hold-down nut has internal threads.
|
|
|
|
|
642 905 01 00
Exhaust Pressure Sensor 2007 & LATER V6 ONLYDPF Pressure Sensor
aka DPF Pressure Sensor
Connects to hoses before and after the exhaust Diesel Particulate Filter (DPF)
|
|
|
|
|
642 905 02 00
Exhaust Pressure Sensor 2014-2017DPF Pressure Sensor
aka DPF Pressure Sensor
Connects to hoses before and after the exhaust Diesel Particulate Filter (DPF)
|
|
|
|
|
000 905 01 32
Exhaust Temperature Sensor #1 2007 & LATER
Located in catalytic converter
Delphi is the OEM Supplier to Mercedes for this part. |
|
|
|
|
000 905 52 05
Exhaust Temperature Sensor #2 2007 & LATER
Located at inlet of DPF (Diesel Particulate Filter)
|
|
|
|
|
001 905 30 05
Exhaust Temperature Sensor #2 2010 & LATER
Located at DPF (diesel particulate filter)
Manufactured by VDO, the OEM supplier to Mercedes.
ONLY FOR 3.0L V6 BLUETEC ENGINES 2010 AND LATER and the 4 CYL OM651 diesel engines 2014-2016
|
|
|
|
|
000 905 86 04
Exhaust Temperature Sensor #2 2010-2019
Only for BlueTec engines
|
|
|
|
|
000 905 14 05
Exhaust Temperature Sensor #3 2010 & LATER
ONLY FOR 3.0L V6 BLUETEC ENGINES 2010 AND LATER
Mercedes part # 000 905 14 05
Located before Turbocharger, has 45 degree bend.
|
|
|
|
|
008 153 22 28
Exhaust Temperature Sensor 4 CYL 2.1LLocated in exhaust manifold before turbochargers.
|
|
|
|
|
001 905 30 00
Exhaust Temperature Sensor 4 CYL 2.1L 4 CYL
Located in DPF
For Sprinter 4 cylinder 2.1 liter.
|
|
|
|
|
005 153 23 28
Fuel & Oil Temperature Sender 2002 & LATER
2 contact pins, straight electrical connector.
Located on the injection pump on front of engine block on the 2.7L 5 CYL diesel engines.
Located near oil pan for the 3.0L V6 diesel engines.
|
|
|
|
|
000 159 38 04
Fuel Moisture Sensor - Long Version 2010-Mid 2012
Only for BluTec engines 2010-mid 2012.
Located on top of fuel filter. This is only used on the longer version fuel filters and will not fit the short version filter.
If you wish to use the long version fuel filter on your Sprinter, you must install this sensor and not continue to use the short version sensor.
|
|
|
|
|
000 159 37 04
Fuel Moisture Sensor - Short Version 2010-Mid 2012
Only for BlueTec engines 2010-mid 2012
Located on top of fuel filter. This sensor is designed for the shorter version fuel filter and should not be used on the longer version filters.
It will not protrude as far into the filter body far enough, as the other unit shown below.
|
|
|
|
|
000 153 95 13
Fuel Moisture Sensor 2004-2009
Located on top of fuel filter on 2004-2009 models
Three electrical contact pins inside the plug.
Threaded coupling on top does not come with the sensor, CLICK HERE. |
|
|
|
|
014 997 70 45
Fuel Pressure Control Valve Reseal Kit 2002-2003
Reseal kit for fuel control valve located at the firewall end of the fuel distribution rail.
This fits only the 2002-2003 models, with the OM612 engine.
2004 to 2006 OM647 five cylinder engines use a different fuel control valve.
|
|
|
|
|
006 153 65 28
Fuel Pressure Sensor 2004-2009
Check your plug connector first - This is the pressure sensor with the straight plug connection and has a FLAT side on one end.
Located at back end of fuel rail - OM647 and OM642 engines ONLY - Located on right rail on the V6 engines.
For the fuel control valve with the 90 degree connection (ON THE OPPOSITE END), See Below.
|
|
|
|
|
006 153 78 28
Fuel Pressure Sensor 2010 & LATER
Oval shaped Plug, no flat edges - if you have a 2009 or 2010 check the plug connector first.
Located on back end of the Right side fuel rail.
The 90 degree sensor on the Left fuel rail is not available as a separate component and is only available with the left fuel rail assembly.
|
|
|
|
|
000 905 27 01
Fuel Pressure Sensor 2014-2016 2.1L 4 CYL
Located at back end of fuel rail
This is the pressure sensor with the straight plug connection.
The fuel control valve with the 90 degree connection is only available with the fuel rail.
|
|
|
|
|
004 542 16 18
Fuel Pressure Sensor 3.0 V6 & 2.1L 4 CYL 2013-2018Located on the fuel feed line
|
|
|
|
|
000 900 31 01
Fuel Pump Control Module V6 & 2.1 DIESEL 2013+
Control module for fuel pumps on 2013+ V6 and 2.1L 4 cylinder diesel sprinters. Please verify number on your existing unit before ordering. |
|
|
|
|
000 905 08 00
Fuel Temperature Sensor 2014-2016 2.1L 4 CYL
This is the smaller threaded sensor, located on the injection pump
|
|
|
|
|
006 542 49 18
Genuine Mercedes - Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYLFits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
005 153 50 28
Intake Air Pressure Sensor - All Diesel 2002 & LATER
Located on the air filter housing/canister.
Used in all 5 Cylinder Diesels, 3.0L V6 Diesels and 2.1L 4 Cylinder Diesels.
|
|
|
|
|
651 153 00 28
Intake Air Temperature Sensor 2002 & LATER
This is a relatively common failure item, which can cause the engine to go into limp mode.
This sensor is often oil soaked from vapors in the charged air stream. This is caused by oil leakage from the turbocharger shaft seals.
Carrying a spare sensor is suggested, as they are inexpensive and always seem to fail in the middle of nowhere.
|
|
|
|
|
006 153 24 28
Intake Manifold Runner Position Sensor 2007-2009 3.0L V6
Located on intake manifold to interface with plastic intake flap runner.
This version has no pigtail attached and is only used on the early 2007-2009 V6 diesels.
The base mounted o-ring is supplied with the sensor.
|
|
|
|
|
000 905 50 04
Intake Manifold Runner Position Sensor 2010-2018 3.0L V6
Located on intake manifold to interface with the intake runner.
This version sensor has a pigtail attached and is ONLY used on BlueTec engines.
|
|
|
|
|
010 153 72 28
MAP Sensor (Boost Pressure) 2.1L 2014-2016Manifold Absolute Pressure (MAP) sensor - aka Boost Pressure Sensor
2014-2016 2.1L 4 Cylinder
|
|
|
|
|
006 153 99 28
MAP Sensor (Boost Pressure) 2004 & LATER
2004-2018 2.7L I-5 and 3.0L V6 Diesel engine
Manifold Absolute Pressure (MAP) sensor
aka Boost Pressure Sensor
|
|
|
|
|
000 094 34 48
Mass Air Flow Sensor 3.0L V6 Diesel 2010 & LATER
Only for OM 642 BlueTec Diesel Engine
Also known as MAF Sensor
Not for 2009 and earlier engines. The earlier MAF sensor can be seen below.
|
|
|
|
|
000 905 35 03
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2010-2016
Only for BlueTec engines 2010 and later. (TWO REQUIRED FOR 3.0L V6 DIESEL)
This part has changed numbers many times, 000 905 35 03, 000-905-30-00, 000-905-70-00, 003-542-88-18, 006-542-72-18. It is best to get the number off your old unit to confirm.
FOR THE 2.1L 4 CYL ENGINE ONLY ONE OF THESE IS REQUIRED AND ONE OF A DIFFERENT PART NUMBER IS ALSO REQUIRED. THIS IS THE FRONT NOx SENSOR FOR THE 4 CYL ENGINE.
|
|
|
|
|
000 905 85 11 80
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2015+
Only for BlueTec engines 2015 and later (Provide VIN as some 2015 models do not fit)
Also known as:
000 905 85 11
000 905 28 09
000 905 97 03
|
|
|
|
|
000 905 84 11
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2016+
Only for BlueTec engines 2016 and later
This part has changed numbers many times:
000 905 96 03
000 905 00 08
000 905 27 09
000 905 84 11
It is best to get the number off your old unit to confirm.
|
|
|
|
|
006 542 49 18-BOSCH
Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYL
Fits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
642 078 01 49
Pressure Control Valve 3.0L V6 2007-2022
Sits on the end of fuel rail |
|
|
