Home


Advanced Search



	SPRINTER GEN. I 2002-2006 (T1N)
	SPRINTER GEN. II 2007-2018 (NCV3)
	SPRINTER GEN. III 2019-2025 (VS30)
	METRIS 2016-2023
	EUROVAN 2001-2003
	EUROVAN 1997-2000
	EUROVAN 1992-1996



Brake Calipers & Pads
2004-06 Turbo Resonator
2007-on Turbo Hose Adapter
A/C Warranty Info
Turbo Warranty Info



Shock Absorber Guide
VIN Number Guide
A/C Warranty Info

SPRINTER GEN. II 2007-2018 (NCV3)

Chemicals, Tools, and Hardware

Hardware

000 990 69 03 EGR Pipe Bolt - Genuine Mercedes 2007 & LATER

M6 X 16MM COPPER COATED.

Sold Individually.

Used on all EGR pipe flanges (EGR Return Line Bolt).

$2.78

Hose Clamp 13 mm-Fuel Injection 2002-2014

21013 Fuel Injection Hose Clamp 13mm 2002 & LATER

Clamping Range 12.5 - 14mm

These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.

If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......

2002-2003 Sprinter...................... Order 4 x 13mm clamps
2004-2006 Sprinter...................... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter...................... Order 6 x 13mm clamps & 6 x 15mm clamps

$1.46

Hose Clamp 15 mm-Fuel Injection 2002-2014

21015 Fuel Injection Hose Clamp 15mm 2002 & LATER

Clamping Range 13.5-15.5mm

These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.

If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......

2002-2003 Sprinter........... Order 4 x 13mm clamps
2004-2006 Sprinter........... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........... Order 6 x 13mm clamps & 6 x 15mm clamps

$1.48

Hose Clamp 17 mm-Fuel Injection 2002-2014

21017 Fuel Injection Hose Clamp 17mm 2002 & LATER

Clamping Range 16-18mm

These are special fuel hose clamps with rolled edges and no open serrations so, the clamp will not cut into the hose

If you are replacing replacing all of the original Mercedes factory "Clic" style clamps on a ......
2002-2003 Sprinter........................order 4 x 13mm clamps
2004-2006 Sprinter........................order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........................order 6 x 13mm clamps & 6 x 15mm clamps

$1.55

000000-001527 General Interior Screw 2007 & Later

This is a general interior screw for various interior trim items and plastic pieces and is used throughout the Sprinter vehicle.

The head is a T20 Torx and is about 1/2" (12MM) in length.

$1.91

N 910143 008010 64 Hexalobular Screw 2007 & LATER

Sold Individually.

Replaces 001-990-51-04, 0019905104, 910143-008010 & 914126-008068.

$5.27

N 910143 008005 Hexalobular Screw M8x40 - Genuine Mercedes 2004-2006 & 2.1L 4CYL 2014-2017

M8x40 screw.

Used on Turbocharger Exhaust Clamp Bolt, Exhaust system, Oil pan to cylinder crankcase, Engine right support to cylinder crankcase, and engine support to cylinder crankcase.

$3.84

000000 005888 Hose Clamp 60-80mm

Clamping Range is 60-80mm (12mm width).

Genuine Mercedes part.

$5.85

006 997 60 90 Loom Tie 70-90mm

Loom Tie - Hose Clamp with Worm Drive.

(aka Air Pipe Clamp, Boot Clamp, Inter-Cooler Pipe Clamp, Engine Air Duct Clamp, Outlet Hose Clamp, Air Hose Clamp, & Air Tube Clamp)

Air Intake Pipe to Mass Air Flow Sensor.

Clamping Range is 70-90mm.

Replaces 120 995 04 01, 916002 088100 and 916026 070000.

$10.84

910105-012016 M10 X 50MM BOLT -ZINC PLATED HEX HEAD

Strength rating 10.9

Sold individually

Used for motor mounts on 2002-2006 models. One bolt for each engine mount is required.

$7.84

000000-001159 M6 X 20MM BOLT - ZINC PLATED TORX HEAD

M6 X 20MM

Sold Individually

Used on all SPRINTERS

$2.71

N 910143 008017 M8x55MM BOLT - ZINC PLATED TORX HEAD

Carrier to cylinder crankcase (Turbocharger Support Stand / Base bolt - 4 required).

M8 X 55MM.

Sold individually.

Used on all SPRINTERS.

$2.84

000000-003120 Rear Grab Handle Bolt

For Rear grab handles.

$4.84

611 990 00 10 Screw M7x25 - Genuine Mercedes 2002 & LATER

Used on various areas of the Sprinter vans.

Camshaft Gear (611 052 05 01) to Camshaft M7x25.

#59 in the diagram.

$1.71

001 990 93 03 Screw with Round Hexal Head 2007 & LATER

High Pressure Fuel Pump stretch hold-down bolts.

M7x35 - Injection pump to cylinder head.

Sold Individually.

$5.71

906 270 05 01-AFT Transmission Pan 2014-2017 2.1L SPRINTER & METRIS 4 Cyl - Aftermarket

Only for Sprinters with 7 speed transmission.

Same as part number: 222 270 05 12

$68.84

140 990 46 01 Transmission Pan Bolt - 5CYL & V6 Engines - Genuine Mercedes 2002-2022

Torx head bolt 6 X 32MM.

Six Required - Sold Individually.

Used on all 5 cylinder & 6 cylinder engines.

Also known as part number: 003 990 02 12.

$2.48

004 990 35 12 Transmission Pan Bolt 2014-2022 SPRINTER 4 CYL & METRIS 2016+ & SPRINTER V6 2019-2022

Aluminum Torx head "stretch bolt".

Mercedes Benz suggests not re-using these when changing your A/T filter.

Six required, sold individually.

Used ONLY on A/T's for 4 CYL engine models, both Sprinter and Metris & Sprinter V6 models from 2019-2022.

$1.71

639 998 01 85-FEBI Tree Nail Clip - FEBI 2002 & Later

This is a general tree nail clip to secure various interior trim items and plastic pieces and is used throughout the sprinter vehicle.

The clip should receive a small interior screw.

Also used on T1N models as a dowel for the lighting unit to cowl - #65 in the diagram.

$3.27

639 998 01 85-MB Tree Nail Clip - Genuine Mercedes 2002 & Later

This is a general tree nail clip to secure various interior trim items and plastic pieces and is used throughout the sprinter vehicle.

The clip should receive a small interior screw.

Also used on T1N models as a dowel for the lighting unit to cowl - #65 in the diagram.

Genuine Mercedes part.

$6.69