|
|
|
164 490 05 13
AdBlue DEF Injection Valve / Nozzle - EPA10 & EPA13
Also known as DEF dosing valve (Diesel Emissions Fluid Injector).
Low Emission Engine - EPA 10 and EPA 13
This OEM Bosch valve is the identical part as those sold at a Mercedes dealer.
*Send us your VIN if you're unsure about fitment* |
|
|
|
|
000 470 04 00
AdBlue DEF Tank Delivery Pump 2014 & LATER
This is for the later model vehicles, with the DEF tank labeled part number 906 470 18 15 on the top of the tank.
Pump for AdBlue urea emissions fluid and it is used for newer vehicles (All the 4 CYL and the later V6 engines). Also known as the DEF delivery or dosing pump. This pump is the identical original Bosch pump sold at a Mercedes dealer.
Compare your existing pump to the photo. A change was made during model year 2014. If not the same pump, see the earlier version pump as shown below.
|
|
|
|
|
642 094 05 80
Crankcase Vent Valve Heater Grommet 2004 & LATER
Grommet for two pin electrical sensor breather tube.
Or see below for the sensor with the grommet included.
|
|
|
|
|
906 470 22 64
DEF Feed Line 2010+ TYPE A
DEF Feed line to DEF injector, straight connection type.
There are two versions of this DEF line. They are not interchangeable.
Simply compare your existing line at the DEF injector connection to determine which one you need.
Notice the red circle with straight line connection. The other version is shown below.
|
|
|
|
|
906 490 06 00
Diesel Particulate Filter (DPF) 3.0L V6 Diesel 2010-2022
Only for BlueTec engines, 2010 and later.
This unit is a combined device, consisting of Diesel oxidation catalyst up front and and a DPF in the rear of the housing.
This is a Brand New original Mercedes DPF, but it is sold as an exchange. Your old unit must be returned for the core deposit refund.
|
|
|
|
|
906 490 00 42
DPF Band Clamp 3.0L V6 2010 & LATER
Interfaces with the DPF bracket, shown below
|
|
|
|
|
906 492 69 41
DPF Bracket 3.0L V6 2010 & LATER
This is the 3.0L V6 DPF bracket which is subject to cracking.
The old part number has been superseded by this new revised part, which is more robust.
This bracket interfaces with the DPF band clamp, shown below.
|
|
|
|
|
DPF KIT
DPF Cleaning Kit 2007 & Later
Complete kit with all necessary items for cleaning the DPF (Diesel Particulate Filter)
Incudes:
1 x Pressurized Spray Gun
1 x Spray wand with five nozzle attachments
1 x DPF Filter Cleaner (also available separately)
1 x DPF Filter Purge (also available separately)
|
|
|
|
|
20112
DPF Filter Purge 2007 & Later
Additional fluid for DPF flushing. This product is not to be used in any manner, other than with the kit shown below.
See complete kit below......
|
|
|
|
|
002 540 70 97
EGR Change Over Valve
Electro-Vacuum valve located in the EGR circuit on all Sprinter diesel engines.
On the V6, it is located behind passenger headlight. |
|
|
|
|
642 140 02 00
EGR Change Over Valve - Cooler End Housing 3.0L V6 2007 & LATER
This part is located at the back end of the EGR cooler.
The actual EGR valve is located at the front end of the EGR cooler. |
|
|
|
|
642 140 21 75
EGR Cooler 3.0L V6 Diesel 2007 & LATER
See all related gaskets, shown below |
|
|
|
|
642 142 01 81
EGR Cooler Gasket 3.0 V6 Diesel 2007 & LATER
|
|
|
|
|
642 141 04 83
EGR Cooler Hose A 2007 & LATER
Only for 3.0 V6 diesel
Water Hose - EGR Recirculation Cooler to Engine |
|
|
|
|
642 141 05 83
EGR Cooler Hose B 2007 & LATER
Only for 3.0 V6 diesel |
|
|
|
|
642 140 21 08
EGR Pipe - LONG 3.0L V6 2010 & LATER
Stainless steel EGR pipe
|
|
|
|
|
642 140 09 08
EGR Pipe - SHORT 3.0L V6 2007 & LATER
Exhaust gas recirculation pipe. This is the shorter of the two pipes.
|
|
|
|
|
000 990 69 03
EGR Pipe Bolt 2007 & LATER
M6 X 16MM COPPER COATED
Sold Individually
Used on all EGR pipe flanges (EGR Return Line Bolt)
|
|
|
|
|
642 140 14 60-MB
EGR Valve 3.0L V6 Diesel - Genuine Mercedes 2010-2022
Genuine Mercedes EGR Valve - Only for OM642 BluTec Diesel Engine (2010 and Later)
Not for 2007-2009 models
|
|
|
|
|
642 140 14 60-HELLA
EGR Valve 3.0L V6 Diesel - HELLA 2010-2022
Only for OM642 BluTec Diesel Engine (2010 and later)
Not for 2007-2009 models
|
|
|
|
|
642 140 14 60-WAHLER
EGR Valve 3.0L V6 Diesel - OEM 2010-2022
Only for OM642 BluTec Diesel Engine (2010 and Later) - Not for 2007-2009 models
WAHLER is the OEM supplier to Mercedes for this part.
Part is a Brand New original and NOT rebuilt. Therefore, no core deposit is required.
|
|
|
|
|
642 142 23 80
EGR Valve Gasket - 3.0L V6 Diesel 2007 & LATER
For all 3.0L V6 EGR valves for 2007 and later
|
|
|
|
|
642 141 02 83
EGR Valve Hose #1 2007-2022
Only for 3.0 V6 diesel
|
|
|
|
|
642 141 03 83
EGR Valve Hose #2 2007 & LATER
Only for 3.0 V6 Diesel |
|
|
|
|
000 905 27 06
Exhaust Back Pressure Sensor 3.0L V6 2014 & LATER
See earlier version of this sensor below
|
|
|
|
|
906 995 02 02
Exhaust Clamp - 70MM 3.0L V6 2010 & LATER
This clamp is for a 70MM OD tube
Located at output side of catalytic converter to tailpipe
|
|
|
|
|
009 542 55 18
Front Oygen Sensor - 2019+ Sprinter 2.0L 4CYL & METRIS 2016+
Front Oxygen sensor, located before the catalyst
|
|
|
|
|
006 542 49 18
Genuine Mercedes - Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYLFits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
642 010 17 91-AFT
Oil Separator / PCV Assembly 2010 & LATER Sprinter
Oil separator/PCV, breather hose and heating element, sold as a complete assembly
The heating element on this component, is a small but, very critical component, as it prevents the crankcase vapors from freezing. (water vapor is a byproduct of combustion) Oil and water emulsification forms when vapors come in contact with cooler temperatures, they freeze and the ice crystals can then easily erode the turbocharger intake blades. It does sound very strange but, it is true.
Only for BlueTec engines, which are 2010 and later. |
|
|
|
|
642 010 17 91-MB
Oil Separator / PCV Assembly 2010-2022
Oil separator/PCV, breather hose and heating element, sold as a complete assembly
The heating element on this component, is a small but, very critical component, as it prevents the crankcase vapors from freezing. (water vapor is a byproduct of combustion) Oil and water emulsification forms when vapors come in contact with cooler temperatures, they freeze and the ice crystals can then easily erode the turbocharger intake blades. It does sound very strange but, it is true.
Only for BlueTec engines, which are 2010 and later.
|
|
|
|
|
642 010 72 15
Oil Separator PCV Cover - V6 Only
Oil separator / PCV - breather cover |
|
|
|
|
006 542 49 18-BOSCH
Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYL
Fits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
009 542 55 18 64
Oxygen Sensor Sprinter III 2.0L 4 CYLLocated before catalyst
|
|
|
|
|
651 010 16 82
PCV Breather Hose 2.1 4 CYL
Breather hose and heating element, sold as a complete assembly
The heating element on this component, is a small but, very critical component, as it prevents the crankcase vapors from freezing. (water vapor is a byproduct of combustion) Oil and water emulsification forms when vapors come in contact with cooler temperatures, they freeze and the ice crystals can then easily erode the turbocharger intake blades. |
|
|
|
|
007 542 63 18
Rear Oygen Sensor-2019+ Sprinter 2.0L & METRIS 2016+Rear Oxygen sensor, located after the catalyst
This is the identical Bosch Oxygen sensor sold at a franchise Mercedes dealer for half the price.
|
|
|
|
|
001 990 93 03
Screw with Round Hexal Head 2007 & LATER
High Pressure Fuel Pump stretch hold-down bolts.
M7x35 - Injection pump to cylinder head.
Sold Individually.
|
|
|
|
|
642 098 08 80
Throttle Body to Transverse Charge Air Pipe Gasket 2007 & LATERLocated between Throttle body and cross-over pipe
|
|
|
