|
|
|
2002-2006 Sprinter Ball Joint Kit ***FREE USA SHIPPING***Both lower ball joints with shipping.
2 to 3 Day shipping to most US Zip Codes included!
These kits are only for shipping to a US address.
|
|
|
|
|
2002-2006 Sprinter Control Arm Bushing Kit ***FREE USA SHIPPING***All four control arm bushings with shipping included.
2-3 Day shipping to most US Zip Codes included!
These kits are only for shipping to a US address.
|
|
|
|
|
End Link Bushing-Front Stabilizer Bar 2002-20062 are required for each link for a total of 4 per vehicle
|
|
|
|
|
Front Stabilzer Bar Bracket 2002-2006For FRONT stabilizer bar, for both standard or HD bushings.
|
|
|
|
|
Front Control Arm Bushing 2002-2006Inboard position on control arm, 2 required per side, 4 per vehicle |
|
|
|
|
Front Stabilizer Bar Bushing-HEAVY DUTY 25MM Version 2002-20062 required, only for models with larger HD 25 mm diameter stabilizer bar. |
|
|
|
|
Front Stabilizer Bar Bushing-STANDARD 22MM Version 2002-20062 required, only for 2500 model with 22mm diameter standard stabilizer bar (smaller diameter bar than the 3500 model) |
|
|
|
|
Left Front Stabilizer Bar End Link 2002-2006
Left front or driver's side
Bushings are pre-installed
|
|
|
|
|
Left Lower Control Arm 2002-2006Only for driver's side.
Includes Ball joint and both bushings pre-installed. |
|
|
|
|
Left Lower Control Arm 2002-2006Only for driver's side.
Includes Ball joint and both bushings pre-installed. |
|
|
|
|
Left Steering Knuckle 2500 with 16" Wheels 2002-2006Driver's side unit.
ONLY FOR 2500 MODELS WITH 16 INCH WHEELS.
|
|
|
|
|
Load Sensing Link/ Lever 2002 & LATER+Link for load sensor/valve on rear suspension |
|
|
|
|
Lower Ball Joint 2002-2006Sprinter 2500 & 3500 Models
Two required per vehicle, one for each lower control arm.
Order two, if you are replacing both sides.
|
|
|
|
|
Rear Leaf Spring Buffer/CushionIf you hear clacking noises in the area of your rear leaf springs, it may be that these rubber cushions are worn and need replacement.
A total of four per vehicle are required, two per side.
|
|
|
|
|
Rear Leaf Spring Bushing 2500If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of four per vehicle are required, two per side.
2500 models only
|
|
|
|
|
Rear Leaf Spring Bushing 3500If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of two per vehicle are required.
These are for the REAR position of the leaf spring. The front bushing is different.
3500 models only
|
|
|
|
|
Rear Leaf Spring Bushing 3500If you hear clacking noises in the area of your rear leaf springs, it may be that these rubber bushings are worn and need replacement. These press into the eyelet ends of each of the rear leaf springs. A total of two per vehicle are required.
These are for the FRONT position of the leaf spring. The rear bushing is different.
3500 models only
|
|
|
|
|
Rear Stabilizer Bar Bushing 3500-HD 30MM BAR 2002-2006Only for 3500 models with the standard 30mm diameter rear stabilizer bar
Rear 3500 Stabilizer Bar to frame
Two required
These are the medium size 30mm inside diameter for the heavier duty stabilizer bar. (Approx 1.2 inches) See heavy duty option bushings below
|
|
|
|
|
Rear Stabilizer Bar Bushing 3500-STD 27MM BAR 2002-2006Only for 3500 models with the standard 27mm diameter rear stabilizer bar
Rear 3500 Stabilizer Bar to frame
Two required
These are the smaller 27mm inside diameter for the standard stabilizer bar. (Approx 1.1 inches) See heavy duty option bushings below
|
|
|
|
|
Rear Stabilizer Bar Bushing 3500-XHD 33MM BAR 2002-2006Rear 3500 Stabilizer Bar to frame
Two required
These are the larger 33mm inside diameter for the heavy duty stabilizer bar. (Approx 1.3 inches) See standard bushings below.
|
|
|
|
|
Rear Stabilizer Bar Bushing-2500 HD 27MM Version 2002-2006Rear 2500 Stabilizer Bar to frame
These are for the heavy duty stabilizer bar - 27 mm diameter
Two required |
|
|
|
|
Rear Stabilizer Bar Bushing-2500 Std 22 mm Version 2002-2006Rear 2500 Stabilizer Bar to frame
These are for the standard stabilizer bar - 22 mm diameter
Two required, per vehicle
|
|
|
|
|
Rear Stabilizer Bar End Link-L/R 2500 2002-2006Fits left or right side rear of 2500 model ONLY
|
|
|
|
|
Rear Stabilizer Bar End Link-L/R 3500 2002-2006Fits left or right side rear of 3500 model only
|
|
|
|
|
Rear Stabilzer Bar Bracket 2500 2002-2006For both standard 22 mm and heavy duty 27 mm, rear stabilizer bar
Only for 2500 models on REAR stabilizer bar
|
|
|
|
|
Right Front Stabilizer Bar End Link 2002-2006
Right or passenger's side
Bushings are pre-installed
|
|
|
|
|
Right Lower Control Arm 2002-2006Only for passenger's side.
Includes Ball joint and both bushings pre-installed.
|
|
|
|
|
Right Lower Control Arm 2002-2006Only for passenger's side.
Includes Ball joint and both bushings pre-installed.
|
|
|
|
|
Right Steering Knuckle 2500 & 3500 with 15" Wheels 2002-2006Passenger's side unit.
ONLY FOR 2500 MODELS WITH 15 INCH WHEELS AND ALL 3500 MODELS.
|
|
|
|
|
Right Steering Knuckle 2500 with 16" Wheels 2002-2006Right or passenger's side unit.
ONLY FOR 2500 MODELS WITH 16 INCH WHEELS.
|
|
|
|
|
Stabilizer Bar End Link Bushing-Rear L or R 2500 2002 & LATERFits either left or right
For Lower Yoke End of Rear Sway Bar End Link, 2 are required and are sold individually.
These are used on 2002-2006 2500 & 3500 models and 2500 models ONLY from 2007 and later.
See 2007+ 3500 bushings shown below
|
|
|
