Before replacing the fan clutch assembly or the fan clutch, you must inspect the fan blades very carefully for any chips, cracks or damage.
Any missing chunks or pieces will result in the fan being out of balance and will mean a very short life for any fan clutch, as it will quickly destroy the bearing in the center of the clutch.
It is recommended that you closely inspect your fan blade when you replace the clutch. A damaged fan blade will cause excessive noise and premature fan clutch failure. A fan blade with just one small missing section on the blade will cause the fan clutch bearing to wear out very quickly, due to the entire assembly being out of balance. Check it very carefully.
IMPORTANT INSTALLATION INFO: Torque value is 33 ft/lbs or 45 Nm
Clean the mating surfaces and torque the center bolt properly. Lack of clearance in this area
makes
it difficult to gain access during installation. The radiator should
be removed in order to do the job correctly. Failure to do so will allow the fan clutch to slip and freewheel on the pulley.