Sprinter 2004-2006
1. DO NOT INSTALL IMMEDIATELY
2. INSURE THAT THE IGNITION IS IN THE OFF POSITION
3. PLUG IN THE ACTUATOR ELECTRICAL PORT FIRST
4. TURN KEY TO THE ON POSITION -- DO NOT START THE VEHICLE
5. THE ARM ON THE ACTUATOR WILL SELF-ADJUST TO THE MEMORY OF THE TURBO ON THE VEHICLE
6. ONCE THE ARM IS SET YOU, MAY TURN THE KEY TO THE OFF POSITION
7. NOW INSTALL THE ACTUATOR ON THE TURBO AND, YOU ARE ALL SET
8. IMPORTANT NOTE: IF THE NEW ACTUATOR ARM IS NOT MOVING, THE VANES ON THE TURBO ARE STICKING AND YOU WILL NEED TO REPLACE THE TURBOCHARGER. OTHERWISE THE NEW ACTUATOR WILL QUICKLY BURN OUT, AS DID YOUR PREVIOUS ACTUATOR.
|
