Very common failure item, which often results in a no spark, or weak spark condition. The failure will normally occur in two cylinders, as the electrical circuitry is divided into three pairs.
When replacing this coil, insure that you use a correct VW type wire removal tool, so as to not damage the ignition wires at the spark plug end.
DO NOT YANK ON ANY OF THE WIRES, AS THIS WILL CAUSE INTERNAL BREAKAGE WITHIN THE WIRE, CAUSING A MISFIRE.
Detailed Description
Eurovan 1997-2000 (Only for 12V engine)
Our part is an OEM Bremi, German made unit and not one of the cheap Chinese imitations found on eBay and other such sites.
