|
|
|
|
2002 & LATER Sprinter Automatic Transmission Service Kit
Complete service kit with 8 liters of fully synthetic Pentosin Spec 236.14 (Supersedes MB Spec fluids 236.10 and 236.12)
FOR ALL 5 CYLINDER & V6 SPRINTERS
SHIPPED BY FEDEX OR UPS GROUND SERVICE |
|
|
|
|
2002 & LATER Sprinter Automatic Transmission Service Kit - MB FluidComplete service kit with of 8 liters of Spec 236.14 Fluid in Mercedes Benz containers (Supersedes 236.10 and 236.12 fluids)
FOR ALL 5 CYLINDER & V6 SPRINTERS
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY, CANNOT BE SHIPPED BY MAIL
|
|
|
|
|
2002 & LATER Sprinter Automatic Transmission Service Kit-FUCHS OEM FLUIDComplete service kit with 8 liters of Spec 236.14 Fluid in Fuchs containers (Supersedes MB Spec fluids 236.10 and 236.12)
FOR ALL 5 CYLINDER & V6 SPRINTERS
This fluid is manufactured by Fuchs,
an OEM supplier for factory fill fluids on the assembly line. They are
an OEM supplier of differential and transmission fluid, as well as engine
oil.
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY, CANNOT BE SHIPPED BY MAIL
|
|
|
|
|
2002-2019 Sprinter Automatic Transmission Service Kit-SHELL 134 FLUID
This is what our local Mercedes dealer uses for Sprinters.
Complete service kit with 8 quarts of MB Spec 236.14 Shell Oil ATF 134 (Supersedes MB Spec fluids 236.10 and 236.12)
FOR ALL 5 CYLINDER & V6 SPRINTERS
This fluid is manufactured by Shell Oil
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY, CANNOT BE SHIPPED BY MAIL
|
|
|
|
|
2014-2016 Sprinter 2.1L 4 Cyl Automatic Transmission Service Kit -FUCHS FluidComplete service kit with 10 Liters of MB Spec 236.15 Fluid in Fuchs containers. Fuchs is the OEM supplier to Mercedes in Germany. (This kit has the newer BLUE ATF, which is used only in the 2.1L model transmission)
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY, CANNOT BE SHIPPED BY MAIL |
|
|
|
|
2014-2016 Sprinter 2.1L 4 Cyl Automatic Transmission Service Kit -MB FluidComplete service kit with Spec 236.15 Fluid in Mercedes Benz containers
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY, CANNOT BE SHIPPED BY MAIL |
|
|
|
|
Acceleration Sensor 2002 & LATERaka Yaw Sensor or Lateral Accelerometer Sensor
Traction Control System
Affects ABS and stability control systems |
|
|
|
|
Bellhousing Plug-Rectangular 2002-2006Torque Converter Access Port
There are two of these plugs at the bottom of the bell housing
Compare to the oval plastic plug shown below.
|
|
|
|
|
Differential Bearing Replacement Kit 2002-2006
Contains pinion shaft seal and all bearings for the differential, along with spacers, bolts, and gland nut.
Bearings will all be known brands, such as Timken, Koyo or SKF, and may be a mix of several of them.
If your Sprinter is a late 2004, 2005 or 2006, nothing else will be required in this kit, other than a cover gasket and replacement fluid.
If you have a 2002, 2003 or early 2004 model, then you will require a different spacer bushing and pinion shaft gland nut, see below.
The spacer bushing in this kit has the following dimensions:
34mm ID
21mm Length
Early models use a bushing with the following dimensions: (see these below)
32mm ID
16mm Length
Differential cover seal is NOT included but, is available and shown below.
|
|
|
|
|
Differential Cover Seal 2002-2006Seal between cover and differential housing.
|
|
|
|
|
Differential Cover Seal 2007-2018Seal between cover and differential housing.
|
|
|
|
|
Differential Fluid 80W90 2002-2006Meets Mercedes Benz Spec Approval 235.0 and states so on the bottle label.
Order two of these one liter bottles, if doing a drain and replacement of your fluid for 2500 models.
Order three of these one liter bottles, if doing a drain and replacement of your fluid for 3500 models.
|
|
|
|
|
Differential Pinion Shaft Nut 2002-Early 2004
This nut needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential.
See the different spacer bushing also, shown below. |
|
|
|
|
Differential Spacer Bushing-32mm 2002-Early 2004
This bushing needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential.
See the different pinion shaft nut also, shown below.
This spacer bushing's dimensions are:
32mm ID
16mm Length
|
|
|
|
|
Driveshaft Support Assembly/Kit 2002-2006Complete kit: Includes metal & rubber collar, boot, clamps, spacers, snap ring and the bearing in the center. AKA: Center Support
Two-piece driveshafts use one support, three-piece driveshafts require two supports, front and rear
|
|
|
|
|
Flex Plate/Ring Gear 2002-2006Located between end of crankshaft & torque converter (bolts to face of torque converter)
AKA starter ring gear
|
|
|
|
|
Front Transmission Pump 2002 & LATERSurrounds A/T front input shaft inside the bell housing
Both the O ring and input shaft seal are furnished with the pump
|
|
|
|
|
Front Transmission Pump O-Ring 2002 & LATERSurrounds the outside perimeter of the front transmission pump |
|
|
|
|
Front Transmission Pump Seal 2002 & LATERLocated in center of front transmission pump
There is also a large diameter o-ring at the circumference of the front pump, see below.
|
|
|
|
|
Shift Selector Cable 2002-2006This is the longer of the two cables in this area
|
|
|
|
|
Shifter Control Assembly WITHOUT ESP 2002-2006Only for those models WITHOUT ESP (Electronic Stability Program)
If you are not certain, check your brake light switch above the brake pedal.
4-Pin connector is WITH ESP
6-Pin connector is WITHOUT ESP
See other version shown below....
|
|
|
|
|
Shifter Control Assembly-WITH ESP 2002-2006Only for those models WITH ESP (Electronic Stability Program)
If you are not certain, check your brake light switch above the brake pedal and count the number of pins on the electrical connector.
4-Pin connector is WITH ESP
6-Pin connector is WITHOUT ESP
See other version shown below......
|
|
|
|
|
Speed Sensor/ Reaction Valve O Ring-Seal 2002 & LATERCommon source of transmission fluid leakage.
Located at the top rear of the transmission case.
|
|
|
|
|
Sprinter Transmission Service Dipstick 2002 & LATER 5 CYL & ALL V6 EnginesTransmission service tool
Includes instruction sheet
Not for the new 2014+ 4 Cylinder Sprinters with the 7-speed A/T, which requires a much longer unit.
See below for the proper dipstick for the 4 CYL engine models
|
|
|
|
|
Transmision Pan Clamp-Version A SPRINTER & METRIS 2002 & LATERThese clamps work in conjunction with the six transmission pan bolts to secure the pan to the bottom of the transmission.
A quantity of 5 of this type clamp are required and 1 of the other version clamp, shown below.
|
|
|
|
|
Transmision Pan Clamp-Version B 2002 & LATERThese clamps work in conjunction with the six transmission pan bolts to secure the pan to the bottom of the transmission.
Quantity of 1 of this part are required and 5 of the other version clamp, shown below.
|
|
|
|
|
Transmission Adapter Plug Housing 2002 & LATER
A very common source of A/T fluid leaks. This is the third and most recent revision of this part.
This part is manufactured by Continental, the OEM supplier to Mercedes.
This is the exact same part as sold at a Mercedes dealership, and NOT a Chinese imitation.
This part interfaces with the OEM Conductor Plate, shown below....
Here is a link to a You Tube video of the replacement procedure for this problematic part. It was done on a Mercedes SLK but, this unit is used on many automatic transmissions in series 722.6 https://youtu.be/QvwxeCy8xRQ
|
|
|
|
|
Transmission Conductor Plate 2002 & LATER
For all 5 CYL and V6 engine models, both gas and diesel
NOT for 4 CYL engine models
This part interfaces with the adapter plug housing, shown below....
This part is manufactured by Continental, the OEM supplier to Mercedes.
This is the exact same part as sold at a Mercedes dealership.
Located above the valve body in transmission.
Houses six solenoids and the adapter plug housing and also houses the dipstick tip socket.
This part comprises the uppermost portion of the valve body.
The speed sensor located on this plate (140 540 36 17) is an integral part of this unit and is NOT available as separate part.
This is NOT the cheesy Chinese knock-off product seen on many other websites. It is 87% below the retail price at a Dodge dealer.
|
|
|
|
|
Transmission Cooler Hose/Pipe-Feed Line 2002-2006
This is the supply hose which consists mostly of metal piping with a hose swaged onto one end.
THIS IS #1 ON THE DODGE PARTS DIAGRAM
FOR IDENTIFICATION PURPOSES, THE LENGTH OF THE RUBBER HOSE IS 400mm OR APPROX 15.75 INCHES
IF THERE IS ANY QUESTION, EXAMINE YOUR EXISTING HOSE CLOSELY BEFORE ORDERING. THE MERCEDES PART NUMBER IS STAMPED ON THE FERRULE.
|
|
|
|
|
Transmission Cooler Hose/Pipe-Pressure Line 2002-2006
This is the feed hose which consists mostly of metal piping with a hose swaged onto one one end.
THIS IS #2 ON THE DODGE PARTS DIAGRAM
FOR IDENTIFICATION PURPOSES, THE LENGTH OF THE RUBBER HOSE IS 215mm OR APPROX 8.50 INCHES
IF THERE IS ANY QUESTION, EXAMINE YOUR EXISTING HOSE CLOSELY BEFORE ORDERING. THE MERCEDES PART NUMBER IS STAMPED ON THE FERRULE.
|
|
|
|
|
Transmission Cooler Hose/Pipe-Supply Line 2002-2006
This is the supply hose which consists mostly of metal piping with a hose swaged onto one end.
THIS IS #9 ON THE DODGE PARTS DIAGRAM
FOR IDENTIFICATION PURPOSES, THE LENGTH OF THE RUBBER HOSE IS 420mm OR APPROX 16.5 INCHES
IF THERE IS ANY QUESTION, EXAMINE YOUR EXISTING HOSE CLOSELY BEFORE ORDERING. THE MERCEDES PART NUMBER IS STAMPED ON THE FERRULE.
|
|
|
|
|
Transmission Cooler Hose-Return Line 2002-2006This is the return hose located on the upper right side of the radiator. This is the shorter one of the two and is comprised mostly rubber hose with a small 90 degree pipe fitting on the one end. IT IS #13 ON THE DODGE PARTS DIAGRAM.
It links two metal pipes together.
EXAMINE AND COMPARE TO THE OTHER SIMILAR HOSES BELOW, PRIOR TO ORDERING
|
|
|
|
|
Transmission Cooler Pipe-Return Line 2002-2006Metal pipe linking cooler to flex hose
This is #14 in the Dodge illustration. It links to part # 13, see below.
|
|
|
|
|
Transmission Cooler Pipe-Supply Line 2002-2006Metal pipe linking cooler to flex hose
This is #10 in the Dodge illustration.
It links to part # 9, see below.
|
|
|
|
|
Transmission Drain Plug Seal Ring-Torque Converter 2002-2006 & A/T Oil Pan 2002-2018Fits Torque Converter drain plug 2002-2006
Fits A/T Sump Pan drain plug 2002-2018 V6 models only
|
|
|
|
|
Transmission Fill Pipe Cap 2002 & LATERBlack plastic cap for A/T fill tube
Also need red plastic locking pin |
|
|
|
|
Transmission Fill Pipe Cap Lock Pin 2002 & LATERRed plastic locking pin for black cap on transmission tube
|
|
|
|
|
Transmission Filter Kit 2002 & LATER 5 CYL & V6
Contains the filter element, pan gasket, two seal rings for M8 drain plugs, and red lock pin for automatic transmissions.
For all 5 CYL models and 3.0L V6 & 3.56L V6 engine models
See other transmission components shown below.
|
|
|
|
|
Transmission Fluid- Pentosin 1 Liter All 5Cyl & V6 ModelsMB Spec 236.14 (Supersedes 236.10 and 236.12)
This is the newest fluid specified by Mercedes for use in your Sprinter A/T
This fluid is manufactured by Pentosin and is fully synthetic.
|
|
|
|
|
Transmission Fluid- Pentosin 5 Liter All 5Cyl & V6 ModelsMB Spec 236.14 (Supersedes 236.10 and 236.12)
This is the newest fluid specified by Mercedes for use in your Sprinter A/T
This fluid is manufactured by Pentosin and is fully synthetic.
5 LITER JUG
|
|
|
|
|
Transmission Fluid-Genuine Mercedes 1 Liter 2002 & LATER+ 5 Cyl & V6 Models1 liter container
MB Spec 236.14 on the Mercedes label (Supersedes 236.10 and 236.12)
This fluid is specified by Mercedes for use in your Sprinter A/T (Excepting the 4 CYL models)
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY |
|
|
|
|
Transmission Fluid-OEM FUCHS 5 Liters 2002 & LATER 5 Cyl & V6 Models5 liter container
MB Spec 236.14 under the Fuchs label
This is the newest fluid specified by Mercedes for use in your Sprinter A/T
This fluid is manufactured by Fuchs, an OEM supplier for factory fill fluids on the assembly line. They are a supplier of differential and transmission fluid, as well as engine oil.
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY |
|
|
|
|
Transmission Fluid-OEM FUCHS-1 Liter 2002 & LATER 5Cyl & V6 Models1 liter container
MB Spec 236.14 under the Fuchs/Febi label (Supersedes 236.10 and 236.12)
This is the newest fluid specified by Mercedes for use in your Sprinter A/T
This fluid is manufactured by Fuchs,
an OEM supplier for factory fill fluids on the assembly line. They are
a supplier of differential and transmission fluid, as well as engine
oil.
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY |
|
|
|
|
Transmission Fluid-SHELL 134 1 Quart 2002 & LATER 5Cyl & V6 Models1 liter container
MB Spec 236.14 under the Shell label (Supersedes 236.10 and 236.12)
This is the newest fluid specified by Mercedes for use in your Sprinter A/T
This fluid is manufactured by Shell Oil.
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY |
|
|
|
|
Transmission Gasket Set 2002 & LATERSeal set for transmission overhaul |
|
|
|
|
Transmission Gasket Set 2014-2016 SPRINTER & METRIS 4 CYL MODELSComplete gasket set for the A/T
|
|
|
|
|
Transmission Mount 2002-2006One required per vehicle
|
|
|
|
|
Transmission Output Flange 2002-2006Bolt holes, measured diagonally are 101.6 mm, center to center.
|
|
|
|
|
Transmission Output Shaft Seal-REAR 2002 & LATERLocated in rear A/T tail shaft housing, behind the output flange.
Manufactured by Corteco, the OEM supplier to Mercedes Benz.
|
|
|
|
|
Transmission Pan 2002 & LATERIncludes drain plug and drain plug seal ring.
Fits all transmissions (5 cylinder and V6 engines), except those coupled to the OM651 2.1L 4CYL engines. from 2014 and later.
|
|
|
|
|
Transmission Pan Drain Plug M10-Torque Converter 2002-2006 & A/T Oil Pan 2002-2018Fits Torque Converter drain plug 2002-Mid 2006 (Late 2006 and thereafter uses a smaller diameter M8 torque converter drain plug, see below)
Fits A/T Sump Pan drain plug 2002-2018 M10 Plug size, uses a 5 mm allen wrench
|
|
|
|
|
Transmission Parking Interlock Cable 2002-2006This is the shorter of the two cables in this area
|
|
|
|
|
Transmission Solenoid-Type A 2002-2016There are a mix of different solenoids. To determine which one you need look at the last four digits of the part number on the solenoid in question.
|
|
|
|
|
Transmission Solenoid-Type B 2002-2016There are a mix of different
solenoids. To determine which one you need look at the last four digits
of the part number on the solenoid in question. |
|
|
|
|
Transmission Solenoid-Type C 2002-2016There are a mix of different
solenoids. To determine which one you need look at the last four digits
of the part number on the solenoid in question. |
|
|
|
|
Transmission Speed Sensor 2002 & LATERLocated on transmission on left rear side. |
|
|
|
|
Transmission Torque Coverter Drain Plug M8 2007 & LATER (& Late 2006)One per vehicle
Fits only the later version torque converters
Allen wrench size is 4mm
Also fits later 2006 models with this smaller drain plug |
|
|
|
|
