|
|
|
|
|
|
901 410 87 06
2002 - 2003 Driveshaft Assembly
This is a Genuine Mercedes Driveshaft Assembly from the Dealer.
Special Order Part Only - Contact Us with VIN number for proper fitment, accurate pricing and availability! |
|
|
|
|
901 350 00 00-MK
Differential Bearing Master Replacement Kit 2002-2006
Contains pinion shaft seal and all bearings for the differential, along with spacers, bolts, and gland nut.
If your Sprinter is a late 2004, 2005 or 2006, nothing else will be required in this Kit, other than a cover gasket and replacement fluid.
If you have a 2002, 2003 or early 2004 model, then you will require a different spacer bushing and pinion shaft gland nut, See Below.
The spacer bushing in this Kit has the following dimensions:
Early models use a bushing with the following dimensions: (see these below)
Differential cover seal is NOT included but is available and shown below.
|
|
|
|
|
463 330 00 21 40
Differential Cover Cap - Genuine Mercedes 2002-2006
Axle Housing.
This cap fits most T1N Sprinters, however, not for use on the 741.691 Axle.
Email us with your VIN to confirm fitment if you're not sure. |
|
|
|
|
601 351 00 80
Differential Cover Seal - Genuine Mercedes 2002-2006
Seal between cover and differential housing.
|
|
|
|
|
001 989 28 03-FUCHS
Differential Fluid 80W90 - FUCHS 2002-2006
Meets Mercedes Benz Spec Approval 235.0.
Order two of these one liter bottles, if doing a drain and replacement of your fluid for 2500 models.
Order three of these one liter bottles, if doing a drain and replacement of your fluid for 3500 models.
|
|
|
|
|
001 989 58 03 09-MB
Differential Fluid 80W90 - Genuine Mercedes 2002-2006
Mercedes Benz Spec 235.20
Order two of these one liter bottles, if doing a drain and replacement of your fluid for 2500 models.
Order three of these one liter bottles, if doing a drain and replacement of your fluid for 3500 models.
|
|
|
|
|
094 989 09 00 11 ADLW-MB
Differential Fluid 85W90 - Genuine Mercedes
Mercedes Benz Spec 235.0 for Hot Weather Areas
Order two of these one liter bottles, if doing a drain and replacement of your fluid for 2500 models.
Order three of these one liter bottles, if doing a drain and replacement of your fluid for 3500 models.
|
|
|
|
|
601 351 00 72
Differential Pinion Shaft Nut - Genuine Mercedes 2002-Early 2004
This nut needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential.
Also, see the different spacer bushing also, shown below. |
|
|
|
|
601 351 01 72
Differential Pinion Shaft Nut - Genuine Mercedes 2004-2006
This nut for those Mid 2004-2006 T1N models with a taller collar. |
|
|
|
|
901 997 05 35
Differential Rubber Plug - Genuine Mercedes 2002 & Later
Sealing Plug.
Oil Refilling.
Used on all sprinters.
|
|
|
|
|
000 997 62 32
Differential Screw Plug 24X1.5mm - Genuine Mercedes 2002 & Later
Screw Plug.
Oil Drain.
Used on all sprinters.
|
|
|
|
|
108 353 00 42
Differential Spacer Bushing 32mm - Genuine Mercedes 2002-Early 2004
This bushing needs to be ordered for those early T1N models which have a different nut and spacer bushing in the differential.
This spacer bushing's dimensions are: 32mm ID and 16mm Length
Also, see the different pinion shaft nut, shown below.
|
|
|
|
|
309 990 18 01
Driveshaft Bolt M10x1x25 - Genuine Mercedes 2002-2006
Propeller Shaft to Transmission and to Rear Axle.
M10x1x25
OM647 - #50 on the diagram - 8 required.
OM612 - #35 on the diagram - 8 required. |
|
|
|
|
903 410 00 10-FEBI
Driveshaft Support Assembly / Kit - FEBI 2002-2006
Complete kit: Includes metal & rubber collar, boot, clamps, spacers, snap ring and the bearing in the center. AKA: Center Support
Two-piece driveshafts use just one support, three-piece driveshafts (long wheelbase models) require two supports, one front and one rear.
See below for the bolts.
|
|
|
|
|
903 410 00 10-MB
Driveshaft Support Assembly / Kit 2002-2006
*Discontinued by Mercedes - Product No Longer Available After Stock is Depleted*
Complete kit: Includes metal & rubber collar, boot, clamps, spacers, snap ring and the bearing in the center. AKA: Center Support
Two-piece driveshafts use just one support, three-piece driveshafts (long wheelbase models) |
|
|
|
|
903 410 00 10-LEMFORDER
Driveshaft Support Assembly Kit - OEM 2002-2006
Lemforder is the OEM Supplier to Mercedes for this part.
Complete kit: Includes metal & rubber collar, boot, clamps, spacers, snap ring and the bearing in the center. AKA: Center Support
Two-piece driveshafts use just one support, three-piece driveshafts (long wheelbase models) require two supports, one front and one rear.
This Kit is manufactured by Lemforder, the OEM supplier to Mercedes for this part..
|
|
|
|
|
017 997 55 47-ELRING
Pinion Seal for Differential Shaft - OEM 2002-2006
Seal for pinion shaft (differential input shaft). |
|
|
|
|
N 914112 008032
Screw for Differential Cover - Genuine Mercedes 2002-2006
This Screw connects the Cover to Axle Housing and the bracket to the rear axle housing.
There are 10 required for the Cover to Axle Housing. |
|
|
|
|
N 914125 008511
Screw for Rear Brake Cable to Axle - Genuine Mercedes 2002-2006
Brake cable to rear axle.
M8x12
#165 in the diagram. |
|
|
|
|
|
|
|
Copyright © 1985-2026 Europarts Global, Inc. All Rights Reserved.
|
|
|
|
.png)
