|
|
906 598 00 82
2007-2009 3.0L V6 Charge Air Hose Kit ***FREE USA SHIPPING***
Includes the two charge air hoses used on both sides of the intercooler. The hose from the turbo to the intercooler and the hose from the intercooler to the engine.
|
|
|
|
|
906 598 00 82-MB
2007-2009 3.0L V6 Charge Air Hose Kit ***FREE USA SHIPPING***
|
|
|
|
|
642 091 01 50
Ball Socket 3.0L V6 Diesel 2007 & LATER
Ball socket insert for linkage to intake manifold inlet (swirl) actuator.
|
|
|
|
|
642 050 09 16 KIT
BASIC Timing Chain Kit-SPRINTER 3.0L V6 Diesel 2007-MID 2014
This 6-piece kit contains the timing chain and the four timing chain guides and the oil pump chain guide. All chain guides made in Germany by Febi-Bilstein and Iwis, the OEM suppliers to Mercedes. The original OEM Iwis, DOUBLE ROW, continuous timing chain is part of this kit.
The chain tensioner is not included but, it is available separately and also as part of the complete 7-piece kit, see below.
The oil pump drive chain is also not included but, it is also shown below.
|
|
|
|
|
651 905 01 00
Camshaft Position Sensor 2014-2016 2.1L 4 CylOnly for OM651 4 Cyl engine
|
|
|
|
|
651 052 00 00
Camshaft Timing Sprocket 2014-2016 2.1L 4 CYLTwo are required for each engine. One on the end of each camshaft.
|
|
|
|
|
651 090 40 00
Charge Air Elbow 2014-2016 4 CYL
Hard black plastic elbow, bolts to the intake manifold. Includes MAP sensor and two seal rings.
Large oval shaped seal ring is not included.
|
|
|
|
|
906 528 37 82-AFT
Charge Air Hose - Intercooler to Engine 2.1L 4Cyl 2014-2016Located after the intercooler, on left side of vehicle
|
|
|
|
|
906 528 37 82-MB
Charge Air Hose - Intercooler to Engine 2.1L 4Cyl 2014-2016 Genuine Mercedes
Located after the intercooler, on left side of vehicle
Genuine Mercedes part. |
|
|
|
|
906 528 26 82-AFT
Charge Air Hose - Intercooler to Engine 3.0L V6 Diesel 2010 & LATER
Located on the Passenger's side of the engine - This is the shorter of the two charge-air hoses. Seal rings are provided with hose.
This hose will fit all NCV3 model years and early VS30 models. IF you are ordering for a 2019 & Later models, carefully check the current intercooler and intercooler hose that you have to order the correct hose. This hose fits the passenger side for 2019 & Later models with the 907 501 17 00 Intercooler, which can be found here.
If you still do not know which hose you need, email us your VIN number for verification.
|
|
|
|
|
906 528 22 82-AFT
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2007-2009
Located on driver's side of engine. This hose is the longer one of the two charge air hoses. Seal ring and hose clamp are provided with this hose.
This is the newer and longer, upgraded hose, which supersedes 68013652AA
See the other related hose for the opposite side of the intercooler, shown below.
These hoses are also available as a set of two, for both sides, with Free USA Shipping. |
|
|
|
|
906 528 25 82-AFT
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2010 & LATER
This hose is located on Driver's side.
Fits both the 2007-2018 NCV3 and the 2019-2022 V6 with the OM642 engine configuration.
This hose is also available as a Kit of two, for both sides with Free USA Shipping, see below. |
|
|
|
|
906 528 25 82-VAICO
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2010 & LATER
This hose is located on Driver's side.
Fits both the 2007-2018 NCV3 and the 2019-2022 V6 with the OM642 engine configuration.
This hose is also available as a Kit of two, for both sides with Free USA Shipping, see below. |
|
|
|
|
906 528 50 82-AFT
Charge Air Hose TYPE A - Turbocharger to Intercooler 2.1L 4Cyl 2014-2016
This is an AFTERMARKET HOSE. We also offer the Genuine Mercedes part here.
Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the longer version of the two different hoses.
|
|
|
|
|
906 528 50 82-MB
Charge Air Hose TYPE A-Turbocharger to Intercooler 2.1L 4CYL - Genuine Mercedes 2014-2016
Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the longer version of the two different hoses.
THIS HOSE IS ONLY FOR THOSE MODELS WITH STANDARD AIR CONDITIONING, WHICH HAS A SINGLE COMPRESSOR.
THE OTHER VERSION FOR DUAL A/C COMPRESSORS (ROOF MOUNTED A/C), IS SHOWN BELOW.
|
|
|
|
|
906 528 51 82
Charge Air Hose TYPE B - Turbocharger to Intercooler 2.1L 4 Cyl 2014-2016
Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with. This is the shorter version of the two different hoses.
|
|
|
|
|
906 528 03 82-AFT
Charge Air Hose-Intercooler to Engine 3.0L V6 Diesel 2007-2009
This hose is the shorter of the two charge air hoses and runs from the intercooler to the engine. Seal ring and hose clamp are provided with hose.
Located on passenger side of engine.
Manufactured by Rein Automotive, a division of Continental (CRP)
See the other related hose for the opposite side of the intercooler, shown below.
Not for BlueTec engines 2010 and later
|
|
|
|
|
642 090 59 37
Charge Air Intake Pipe 3.0L V6 2007 & LATER
Charge air intake line, upper end of this pipe joins the output side of the turbo resonator.
|
|
|
|
|
642 098 10 39
Charge Air Line Bracket #1 - 3.0L V6 Diesel 2007 & LATER
Flat metal bracket with two holes.
|
|
|
|
|
642 098 04 39
Charge Air Line Bracket #3 3.0L V6 Diesel 2007 & LATER
Bracket from turbo resonator to the aluminum charge air pipe.
This is the large, U-shaped steel bracket with a single bolt hole.
|
|
|
|
|
642 096 15 45
Charge Air Line Bracket #4 3.0L V6 Diesel 2007 & LATER
Bracket at aluminum charge air pipe.
There are numerous brackets on the 3.0L V6 engine and they possibly may have changed after 2010. |
|
|
|
|
642 016 03 38
Charge Air Line Bracket #5 3.0L V6 Diesel 2007 & LATER
There are numerous brackets and possibly changed after 2010.
It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering.
The part # for this is 642 016 03 38 |
|
|
|
|
651 090 38 42
Charge Air Pipe 2014-2016 4 CYL
Hard black plastic pipe, located immediately before the throttle body and after the intercooler charge-air output hose (black hose). |
|
|
|
|
651 050 00 16-KIT
COMPLETE Timing Chain Kit-SPRINTER 2.1L 4 CYL Diesel 2014-2016
This 6-piece kit contains: (1) Timing Chain - with Master Link, (1) Timing Chain Tensioner, (1) Left Chain Guide Rail, (1) Right Chain Guide Rail, & (2) Camshaft Sprockets.
All parts made in Germany by IWIS, the OEM supplier to Mercedes for this part.
|
|
|
|
|
906 490 05 83
Diesel Particulate Filter (DPF) 2.1L 4 CYL 2014-2016
Only for OM651 2.1L 4 CYL engines
See the input and output clamps and the seal ring shown below.
|
|
|
|
|
906 490 06 00
Diesel Particulate Filter (DPF) 3.0L V6 Diesel 2010-2022
Only for BlueTec engines, 2010 and later.
This unit is a combined device, consisting of Diesel oxidation catalyst up front and and a DPF in the rear of the housing.
This is a Brand New original Mercedes DPF, but it is sold as an exchange. Your old unit must be returned for the core deposit refund.
|
|
|
|
|
906 490 00 42
DPF Band Clamp 3.0L V6 2010 & LATER
Interfaces with the DPF bracket, shown below
|
|
|
|
|
906 492 69 41
DPF Bracket 3.0L V6 2010 & LATER
This is the 3.0L V6 DPF bracket which is subject to cracking.
The old part number has been superseded by this new revised part, which is more robust.
This bracket interfaces with the DPF band clamp, shown below.
|
|
|
|
|
642 140 21 08
EGR Pipe - LONG 3.0L V6 2010 & LATER
Stainless steel EGR pipe
|
|
|
|
|
642 140 14 08
EGR Pipe - LONG 3.0L V6 2007-2009
EGR recirculation pipe, stainless steel.
This is the longer of the two pipes.
|
|
|
|
|
642 140 09 08
EGR Pipe - SHORT 3.0L V6 2007 & LATER
Exhaust gas recirculation pipe. This is the shorter of the two pipes.
|
|
|
|
|
651 140 22 08
EGR Pipe 2014-2016 2.1L 4 CYL
Adjacent to EGR Valve and Pressure Converter (Transducer)
|
|
|
|
|
000 905 43 05
EGR Temperature Sensor #3 3.0L V6 Diesel 2007 & LATER
Located at front of engine near the EGR valve.
Note that the hold-down nut has internal threads.
|
|
|
|
|
906 528 03 00
Engine Air Filter Housing 2007-2018 3.0L V6 Diesel
Only for OM642 3.0L V6 Diesel
|
|
|
|
|
906 528 01 00
Engine Air Filter Housing 2014-2016 4 CYL Diesel
Only for OM651
2.1 Liter - 4 Cylinder diesel |
|
|
|
|
000 490 14 41
Exhaust / DPF Clamp - 65MM 2014-2016 4 CYL
Located at the joint at the OUTPUT end of the DPF, where it joints the pipe.
This clamp is for a 65MM OD tube (approx 76MM expanded).
This clamp is also used on 2014+ 2.1L 4 CYL engines
|
|
|
|
|
000 905 27 06
Exhaust Back Pressure Sensor 3.0L V6 2014 & LATER
See earlier version of this sensor below
|
|
|
|
|
000 490 13 41
Exhaust Clamp - 60MM 2007-2018
This clamp is for a 60MM OD tube (approx 70MM expanded)
This clamp is used at the INPUT side of the 2007-2009 3.0L V6 DPF
|
|
|
|
|
906 995 02 02
Exhaust Clamp - 70MM 3.0L V6 2010 & LATER
This clamp is for a 70MM OD tube
Located at output side of catalytic converter to tailpipe
|
|
|
|
|
000 995 53 02
Exhaust Clamping Sleeve - 60MM 2007-2009 3.0L V6
Located at the joint between OUTPUT end of the DPF and the exhaust pipe.
This exhaust clamp is for a 60MM OD tube / pipe.
It is a clamping sleeve joint, with a clamp at each end of the sleeve.
|
|
|
|
|
901 492 00 44
Exhaust Hanger 2002-2018
These rubber exhaust hangers are used in several locations throughout all Sprinter exhaust systems.
|
|
|
|
|
651 142 00 01 07
Exhaust Manifold 4 Cyl Diesel 2014 & LATER
Only for the 4 cylinder OM 651 Turbodiesel engine
|
|
|
|
|
120 142 00 72
Exhaust Manifold Flange Nut 2002-2022
Genuine Mercedes Nut (8 mm) - Made in Germany.
11 required for 2002-2006 2.7L 5CYL engines.
12 required for 2007-2018 3.0L V6 & 2019-2022 3.0L V6 engines.
8 required for 2014-2016 2.1L 4CYL engines.
|
|
|
|
|
651 142 05 80
Exhaust Manifold Gasket 2014-2016 2.1L 4 CYL
One required per engine
|
|
|
|
|
642 142 00 80
Exhaust Manifold Gasket-3.0 V6 Diesel 2007 & LATERExhaust manifold to cylinder head
Fits either side, left or right
Two required
|
|
|
|
|
111 990 04 05-FEBI
Exhaust Manifold Stud 2002 & LATER11 required for 2002-2006 Inline 5 CYL engines
12 required for 2007-2018 & 2019+ 3.0L V6 engines
8 required for 2014-2016 Inline 4 CYL engines
|
|
|
|
|
642 142 31 80
Exhaust Manifold to Turbocharger Manifold Gasket-LEFT 2007 & LATER 3.0L V6 DIESEL
Exhaust manifold to Turbocharger gasket - Left side
|
|
|
|
|
642 142 32 80
Exhaust Manifold to Turbocharger Manifold Gasket-RIGHT 2007 & LATER 3.0L V6 DIESEL
Exhaust manifold to Turbocharger manifold - Right side
|
|
|
|
|
642 905 01 00
Exhaust Pressure Sensor 2007 & LATER V6 ONLYDPF Pressure Sensor
aka DPF Pressure Sensor
Connects to hoses before and after the exhaust Diesel Particulate Filter (DPF)
|
|
|
|
|
642 905 02 00
Exhaust Pressure Sensor 2014-2017DPF Pressure Sensor
aka DPF Pressure Sensor
Connects to hoses before and after the exhaust Diesel Particulate Filter (DPF)
|
|
|
|
|
000 492 08 81
Exhaust Seal Ring 2010+ 3.0L V6
|
|
|
|
|
901 490 41 21
Exhaust Tail Pipe - LONG CHASSIS ONLY 2002-2006
This tail pipe fits only those models with the LONG chassis (158 inch wheel base)
THIS ITEM IS TOO LONG TO SHIP - LOCAL PICKUP ONLY
|
|
|
|
|
000 905 01 32
Exhaust Temperature Sensor #1 2007 & LATER
Located in catalytic converter
Delphi is the OEM Supplier to Mercedes for this part. |
|
|
|
|
000 905 52 05
Exhaust Temperature Sensor #2 2007 & LATER
Located at inlet of DPF (Diesel Particulate Filter)
|
|
|
|
|
001 905 30 05
Exhaust Temperature Sensor #2 2010 & LATER
Located at DPF (diesel particulate filter)
Manufactured by VDO, the OEM supplier to Mercedes.
ONLY FOR 3.0L V6 BLUETEC ENGINES 2010 AND LATER and the 4 CYL OM651 diesel engines 2014-2016
|
|
|
|
|
000 905 86 04
Exhaust Temperature Sensor #2 2010-2019
Only for BlueTec engines
|
|
|
|
|
000 905 14 05
Exhaust Temperature Sensor #3 2010 & LATER
ONLY FOR 3.0L V6 BLUETEC ENGINES 2010 AND LATER
Mercedes part # 000 905 14 05
Located before Turbocharger, has 45 degree bend.
|
|
|
|
|
008 153 22 28
Exhaust Temperature Sensor 4 CYL 2.1LLocated in exhaust manifold before turbochargers.
|
|
|
|
|
001 905 30 00
Exhaust Temperature Sensor 4 CYL 2.1L 4 CYL
Located in DPF
For Sprinter 4 cylinder 2.1 liter.
|
|
|
|
|
651 050 01 27
Exhaust Valve-2.1L 4 CYL Diesel 2014-2016Exhaust valve sold individually, 8 required for OM651 engine
|
|
|
|
|
642 050 05 27
Exhaust Valve-3.0L V6 Diesel 2007 & LATERExhaust valve sold individually, 12 required for OM642 engine
|
|
|
|
|
642 141 01 00
Exhaust Y-Pipe Collector at Turbo 2007 & LATER
Cast iron Y-shaped collector pipe/manifold, from turbocharger to the exhaust manifolds.
Gaskets for this unit are shown below.
|
|
|
|
|
906 528 03 82-MB
Genuine Mercedes - Charge Air Hose-Intercooler to Engine 3.0L V6 Diesel 2007-2009
This hose is the shorter of the two charge air hoses and runs from the intercooler to the engine. Seal ring and hose clamp are provided with hose.
Located on passenger side of engine.
|
|
|
|
|
906 528 26 82-MB
Genuine Mercedes - Charge Air Hose-Intercooler to Engine3.0L V6 Diesel 2010 & LATER
Located on the Passenger's side of the engine - This is the shorter of the two charge air hoses. Seal rings are provided with hose.
This hose will fit all NCV3 model years and early VS30 models. IF you are ordering for a 2019 & Later models, carefully check the current intercooler and intercooler hose that you have to order the correct hose. This hose fits the passenger side for 2019 & Later models with the 907 501 17 00 Intercooler, which can be found here.
If you still do not know which hose you need, email us your VIN number for verification. |
|
|
|
|
906 528 22 82-MB
Genuine Mercedes - Charge Air Hose-Turbocharger to Intercooler 3.0L V6 Diesel 2007-2009
This hose is the longer one of the two charge air hoses. Seal ring and hose clamp are provided with this hose.
|
|
|
|
|
006 542 49 18
Genuine Mercedes - Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYLFits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
642 142 05 80
Intake Gasket 3.0L V6 2007-2022
Located on end of left intake manifold to forward extension of manifold.
|
|
|
|
|
272 140 24 01
Intake Manifold 3.5L Gas Engine 2007-2008Complete intake manifold assembly.
The holes for the throttle housing mount are not threaded. The mounting bolts are self tapping.
|
|
|
|
|
651 090 00 37
Intake Manifold 2.1L 2014-2016 4CYL
Only for 4 cylinder 2.1 Liter engines 2014-2016
Seals and actuator are included.
|
|
|
|
|
642 144 00 35
Intake Manifold Actuator Linkage Repair Kit 3.0L V6 2007 & LATER
Located on the right side intake manifold and is connected to the inlet or swirl valve actuator.
Consists of two linkage components - one metal and one polymer.
|
|
|
|
|
642 141 05 80
Intake Manifold Gasket 3.0L V6 2007-2022
Two are required, one for each cylinder head to manifold, sold individually, left and right are the same.
Order two, if doing both intake manifolds.
|
|
|
|
|
642 150 04 94
Intake Manifold Inlet Actuator 3.0L V6 2007 & LATER
AKA: Idle Air Speed Motor / Servo or Swirl Valve Actuator / Motor
This part is made by Pierburg and is the exact same part that is sold at a Dodge or Mercedes Benz dealer. Same part, same warranty, same OEM German manufacturer but, in their box and not a Mercedes box.
Located on the Right Side of intake manifold.
When installing this actuator, you must insure that the linkage that attaches to it is moving freely. Stuck linkage will cause the new actuator to quickly burn out. |
|
|
|
|
013 997 00 45
Intake Manifold O Ring 3.0L V6 2007 & LATER
Located at Right side of Intake Manifold
|
|
|
|
|
272 198 24 01
Intake Manifold Repair Kit 3.5L Gas Engine 2007-2008Intake Manifold Adjuster Repair Kit
Kit includes aluminum linkage connector plate (bell crank
lever), re-designed vacuum element with aluminum rod and silicon
diaphragm, bolt and washer.
|
|
|
|
|
642 098 07 80
Intake Manifold to Transverse Charge Air Pipe Gasket 2007-2009
This gasket is located between the left intake manifold and the crossover manifold
|
|
|
|
|
642 098 00 37
Intake Pipe Socket 3.0L V6 DIESEL - 2007 & LATER
Furnished with both o-rings, which are not available as a separate item.
|
|
|
|
|
651 050 01 01
Intake Valve-2.1L 4 CYL Diesel 2014-2016Intake valve, sold individually, 8 required
|
|
|
|
|
642 053 04 01
Intake Valve-3.0L V6 Diesel 2007 & LATERIntake valve, sold individually, 12 required
|
|
|
|
|
642 052 17 01
Left Exhaust Camshaft Sprocket-3.0L V6 Diesel 2007-2014
Only for OM 642 3.0L V6 turbodiesel engine
For double roller chain only.
Supersedes old sprocket 642 052 00 01
|
|
|
|
|
642 052 19 01
Left Exhaust Camshaft Sprocket-3.0L V6 Diesel Mid 2014 & LATER
For SINGLE roller chain only.
Only for OM 642 3.0L V6 turbodiesel engine Mid 2014 and later
|
|
|
|
|
642 140 09 09
Left Exhaust Manifold 3.0L V6 Diesel 2007 & LATER
Only for Left (Driver's) side cylinder bank
|
|
|
|
|
642 090 29 37
Left Intake Manifold 3.0L V6 2007-2009
For Left cylinder bank (Driver's side of engine)
The photo of this manifold is not accurate, as it shows a right side manifold and not the left side.
The inlet air actuator is located on the other (right side) manifold. See listing below.
|
|
|
|
|
642 090 69 37
Left Intake Manifold 3.0L V6 2010-2022
Only for BlueTec engines.
For Left cylinder bank (Driver's side of engine).
Genuine Mercedes part. |
|
|
|
|
272 141 22 80
Left Intake Manifold Gasket 3.5L V6 Gas Engine 2007-20081 required, sold individually.
Left and right sides are different.
|
|
|
|
|
000 905 35 03
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2010-2016
Only for BlueTec engines 2010 and later. (TWO REQUIRED FOR 3.0L V6 DIESEL)
This part has changed numbers many times, 000 905 35 03, 000-905-30-00, 000-905-70-00, 003-542-88-18, 006-542-72-18. It is best to get the number off your old unit to confirm.
FOR THE 2.1L 4 CYL ENGINE ONLY ONE OF THESE IS REQUIRED AND ONE OF A DIFFERENT PART NUMBER IS ALSO REQUIRED. THIS IS THE FRONT NOx SENSOR FOR THE 4 CYL ENGINE.
|
|
|
|
|
000 905 85 11 80
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2015+
Only for BlueTec engines 2015 and later (Provide VIN as some 2015 models do not fit)
Also known as:
000 905 85 11
000 905 28 09
000 905 97 03
|
|
|
|
|
000 905 84 11
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2016+
Only for BlueTec engines 2016 and later
This part has changed numbers many times:
000 905 96 03
000 905 00 08
000 905 27 09
000 905 84 11
It is best to get the number off your old unit to confirm.
|
|
|
|
|
006 542 49 18-BOSCH
Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYL
Fits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
642 140 08 09
Right Exhaust Manifold 3.0L V6 Diesel 2007 & LATER
Only for Right (Passenger's) side cylinder bank
OM642 Turbodiesel engine
|
|
|
|
|
642 052 18 01
Right Intake Camshaft Adjuster Sprocket-3.0L V6 Diesel 2007-2014
For double roller chain ONLY, 1 required
Supersedes old sprockets 611 052 05 01 and 646 050 01 49
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
646 050 02 49
Right Intake Camshaft Sprocket-3.0L V6 Diesel 2007-2014
For double roller chain ONLY, 1 required
Supersedes old sprockets 611 052 05 01 and 646 050 01 49
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
642 090 38 37
Right Intake Manifold 3.0L V6 2007-2009
Includes inlet actuator, aka: swirl actuator or turbo boost pressure servo ), which is also available as a separate unit, see below
For Right cylinder bank (Passenger's side of engine)
|
|
|
|
|
642 090 06 37
Right Intake Manifold 3.0L V6 2010-2022
Only for BlueTec engines.
Includes Turbo Boost Pressure Servo / Intake Manifold Inlet Actuator.
For Right cylinder bank (Passenger's side of engine).
Genuine Mercedes part. |
|
|
|
|
272 141 23 80
Right Intake Manifold Gasket 3.5L V6 Gas Engine 2007-20081 required, sold individually.
Left and right sides are different.
|
|
|
|
|
220 492 02 81
Seal Ring - Muffler and Pipe 3.0L V6 2007-2022
Exhaust Pipe Connector Gasket. (Also known as the Catalytic Converter Gasket)
This seal ring is used on 2007-2022 3.0L V6 engines.
|
|
|
|
|
000 492 09 81
Seal Ring - Turbocharger to Exhaust 2004-2006 5 CYL & 2014-2016 2.1L 4 CYL
Located at joint between the turbocharger and the front pipe at the clamp area
This seal ring is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL engines
|
|
|
|
|
651 090 04 70
Throttle Body 2.1L 4 CYL 2014-2016
Complete original unit for all 2.1L 4 CYL diesel engines.
|
|
|
|
|
642 090 02 70
Throttle Body 3.0L V6 Diesel 2007 & LATER
Complete original unit for all 3.0L V6 diesel engines.
This is the identical brand new Bosch unit as sold at a franchise dealership.
This fits both standard and BlueTec models throughout the entire range of production.
|
|
|
|
|
113 141 01 25
Throttle Body 3.5L V6 Gas Engine 2007-2008
Only for 3.5L Gas engine
|
|
|
|
|
651 091 04 60 64
Throttle Body Gasket 2.1L 4 CYL Diesel 2014-2016
Only for 2.1L 4 CYL diesel engines.
|
|
|
|
|
272 141 09 80
Throttle Body Gasket 3.5L V6 Gas Engine 2007-2008Only for 3.5L Gas Engine
|
|
|
|
|
642 141 01 80
Throttle Body Seal Ring 2007 & LATER 3.0L V6 DieselLocated between throttle body and throttle body flange
|
|
|
|
|
642 098 08 80
Throttle Body to Transverse Charge Air Pipe Gasket 2007 & LATERLocated between Throttle body and cross-over pipe
|
|
|
|
|
000 993 71 76 L
Timing Chain - SINGLE ROW WITH LINK 3.0L V6 Diesel MID 2014 & LATER
SINGLE ROW TIMING CHAIN for later model 3.0L V6 Diesel engines.
This chain has a master link. See continuous chain version below.
|
|
|
|
|
000 993 82 76
Timing Chain 2.1L 4 Cyl 2014-2016
Timing chain with master link
|
|
|
|
|
642 050 26 00
Timing Chain Guide Rail Kit - 3.0L V6 Diesel 2007-MID 2014
ONLY FOR ENGINES WITH DOUBLE ROW TIMING CHAIN, 2007 AND LATER, UP TO MID 2014
Set of all five chain guides are included in the kit. Four timing chain guides and one oil pump chain guide for 3.0L turbodiesel engine. None of these guides are available as separate pieces and only as this complete kit. See other components shown below.
All parts
made in Germany by Febi-Bilstein, OEM supplier to Mercedes.
|
|
|
|
|
642 140 00 00
Turbo Resonator 3.0L V6 Diesel 2007-2022
Only for OM642 3.0L V6 Turbodiesel engine
This is the most current revision of this item, which supersedes four earlier part numbers, all of which have been discontinued by Mercedes. This unit is located between the output side of the turbocharger and the aluminum charge air intake pipe.
The seal and o-ring on each end of this unit (as pictured below) are provided with the new resonator.
|
|
|
|
|
642 016 10 38
Turbo Resonator Bracket 3.0L V6 Diesel 2007 & LATERAluminum bracket that bolts directly to the turbo resonator.
There are numerous brackets and they possibly changed after 2010. It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering.
The part# for this is 642 016 10 38. |
|
|
|
|
203 490 04 41
Turbocharger Exhaust Clamp TYPE 2 2004-2006 & 2014-2016 2.1L 4 CYL
Located at the joint between the turbocharger and the exhaust header pipe on 2004-2006 5 CYL engines and on the INPUT end of the DPF on 2004-2016 4 CYL engines.
This is the tapered design, which uses a thick sealing ring, see below... Compare to your original before ordering, as there are two different types for 5 CYL engines.
This clamp is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL (INPUT end of the DPF).
|
|
|
|
|
906 528 22 24
Turbocharger Intake Hose / Duct 3.0 V6 Diesel 2007 & LATER
Links the air filter housing and MAF (mass air flow) sensor to the turbocharger intake, directly in the center of the aluminum turbo housing.
The black seal ring at the turbocharger end is furnished with this hose.
If your old hose has the orange seal ring at the end, this hose will replace it.
This pipe/hose replaces both 906 528 02 24 and 906 528 15 24.
|
|
|
|
|
906 528 02 24
Turbocharger Intake Hose / Duct 3.0 V6 Diesel 2007-2009
Links the air filter housing and MAF (mass air flow) sensor to the turbocharger intake.
The orange seal at the turbocharger end is furnished with this hose.
|
|
|
|
|
906 430 01 03
Vacuum Reservoir 2010+Check part# on old unit before ordering. |
|
|
|
|
651 070 07 68
Vacuum Reservoir 2014-2016 4CYL Diesel
Located in engine compartment
|
|
|
|
|
000 053 56 58
Valve Stem Seal Kit 2014-2016 2.1L 4 CYL Diesel
1 kit is required for each cylinder.
Sold in increments of 1.
Order four kits, if you are doing the entire engine.
|
|
|
|
|
000 053 51 58
Valve Stem Seal Kit 3.0L V6 Diesel 2007 & LATER
1 kit is required for each cylinder.
Sold in increments of 1.
Order six kits if you are doing the entire engine.
|
|
|
