ONLY to be used in conjunction with the folding brake handle, shown below For standard height seat frame and swivel seat (BE2), 170" length chassis type after February 1, 2011
Front cable to yoke
1 required
Only for long chassis models
OVERALL LENGTH OF THIS CABLE IS 2475 mm OR 97 3/8 INCHES
ONLY to be used in conjunction with the folding brake handle, shown below For standard height seat frame and swivel seat (BE2), 144" length chassis type after February 1, 2011
Front cable to yoke
1 required
Only for long chassis models
This adjuster attaches the front parking brake cables with the rear cables that go to each rear wheel. Adjuster only, no cables or hardware are provided with the assembly.
Original Mercedes Benz factory option for drivers seat, so that seat movement does not interfere with parking brake handle when adding a swivel base to the seat.
Both the front and rear handle covers, and the correct front cable, for this option are also shown below. All four components will need to be changed at the same time, in order for this handle to function correctly. Choose the appropriate front cable for your Sprinter's wheelbase length.
Item is referred to as a "folding" handle. It does not actually fold but, drops down lower to allow for the driver's seat to swivel without the handle being in the way.
THERE ARE TWO DIFFERENT VERSIONS OF THIS COVER. THEY ARE NOT INTERCHANGEABLE.
This is the STANDARD version of the parking brake handle and is a longer cover than those covers for the swivel seat. Located at rear of portion of handle. Front section is also shown below.
The swivel seat / drop down version cover is also shown below.
THERE ARE TWO DIFFERENT VERSIONS OF THIS COVER. THEY ARE NOT INTERCHANGEABLE.
This is for the STANDARD parking brake handle.
Located at front part of handle. This cover is NOT for the folding version parking brake handle, which is used with swivel seats.
That part is shown below
