|
|
|
274 198 00 00
2016+ METRIS Oil Change Kit-FUCHS 5W40
Includes Mann oil filter, 8 Liters Fuchs 5W40 and drain plug seal ring.
MB Spec 229.5 |
|
|
|
|
274 998 07 96
2016+ METRIS Serpentine Belt Kit ***FREE USA SHIPPING***Kit includes all required OEM parts, Conti-Tech Belt, Febi-Bilstein Tensioner, and INA Idler Pulley
|
|
|
|
|
274 018 85 00
Breather Hose Assembly - Metris 2016 & Later
This breather hose assembly connects to the oil separator / PCV assembly
AKA Crankcase Vent Hose Assembly
|
|
|
|
|
270 010 55 00
Breather Hose Connector-Metris 2016+This connects the breather hose assembly to the oil separator/PCV assembly
|
|
|
|
|
276 050 02 78
Camshaft Oil Control Valve 2.0L Sprinter 2019+ & Metris 2016+
|
|
|
|
|
021 997 65 45
Charge Air Hose Inside Seal Ring 3.0L V6, 2.1L 4CYL & METRIS 2010-2020Located on the charge air hoses on the input and output side of the intercooler. (64MM DIAMETER, ABOUT 2 1/2 inches)
This black seal ring is fitted to one end, on the INSIDE of hose connection and are only used on BlueTec engines ONLY. The opposite end connection uses the green OUTSIDE seal shown below. (May be a black or green colored seal)
On a 2.1L 4 Cyl engine, there are three of these seals.
On a 2010 and later 3.0L V6 engine there are four of these seals.
|
|
|
|
|
274 090 57 00
Crankcase Vent Valve Assembly Metris 2016+
Complete PVC / Crankcase vent valve & hose assembly.
This part has been revised by Mercedes several times, this is the latest version. |
|
|
|
|
651 090 00 51-HENGST
Engine Air Filter - E1332L - METRIS 2016+
Engine air filter, only for Metris 4 CYL 2016+
|
|
|
|
|
5W40-5L-FUCHS
Engine Oil - FUCHS 5 Liter 5W40 2002-2006 SPRINTER & METRIS 2016+
FUCHS TITAN SUPERSYN LONGLIFE SAE 5W-40 is ultra high performance, fuel-economy engine oil for Sprinters with or without extended service intervals. Optimum cold starting and lower oil consumption.
5 Liter container
MB Approval - 226.5 & 229.5 |
|
|
|
|
111 997 03 30
Engine Oil Pan Drain Plug 2002 & LATER SPRINTER / METRIS 2016+
Fits all engine oil pans for 4 cylinder, 5 cylinder and V6 engines.
|
|
|
|
|
007603-014100
Engine Oil Pan Drain Plug Seal Ring SPRINTER 2002 & LATER + METRIS 2016+
Seal ring for oil pan drain plug.
Manufactured by Elring. One of several OEM gasket suppliers to Mercedes.
|
|
|
|
|
007603-014100-COPPER
Engine Oil Pan Drain Plug Seal Ring SPRINTER 2002 & LATER + METRIS 2016+
Copper Seal ring for oil pan drain plug.
|
|
|
|
|
278 180 04 15
Engine Oil Pump Control Valve Metris & Sprinter
2019+ Sprinters and 2016 Mertis with 4 CYL gasoline engines |
|
|
|
|
274 142 01 80
Exhaust Manifold Gasket-Sprinter III 2019+ & METRIS 2016+
1 required per engine
Only for 4 CYL gasoline engines
|
|
|
|
|
000 997 19 08
Front Crankshaft Seal Sprinter 2019+ & Metris 2016+
Only for 4 CYL gasoline engines
|
|
|
|
|
009 542 55 18
Front Oygen Sensor-2019+ Sprinter 2.0L 4 CYL & METRIS 2016+Front Oxygen sensor, located before the catalyst
|
|
|
|
|
256 070 01 87
Fuel Injector-Sprinter 2019+ 2.0L 4 CYL & METRIS 2016+Four injectors per engine, sold individually.
This is the identical Bosch fuel injector sold by a Mercedes franchise dealership.
|
|
|
|
|
000 010 16 85-MB
Genuine Mercedes Oil Fill Cap - SPRINTER 2002 & LATER + METRIS 2016+
Oil fill cap in valve cover or at end on extension tube on later V6 engines
|
|
|
|
|
274 202 00 19
Idler Pulley 2019+ Sprinter 2.0L 4 CYL & Metris 2016+
Only one idler pulley is used for this engine.
Smooth faced pulley.
ONLY FOR 4 CYL GASOLINE ENGINES
|
|
|
|
|
270 096 01 80
Intake Manifold Gasket-Sprinter 2019+ 2.0L & METRIS 2016+
A total of 4 per engine are required, sold individually.
These fit both the Metris and Sprinter 4 CYL gasoline engines
|
|
|
|
|
000 010 16 85-AFT
Oil Fill Cap - SPRINTER 2002 & LATER + METRIS 2016+
Oil fill cap in valve cover or at end on extension tube on later V6 engines
|
|
|
|
|
270 180 01 09-MANN
Oil Filter -2019+ Sprinter 2.0L 4 CYL & Metris 2016+ HU711/6z
Fits both Metris and 2019+ Sprinters with 4 CYL 2.0 liter gasoline engine.
Filter may be Mann or Perflux. Both are OEM suppliers to Mercedes.
You will need a 27mm socket in order to remove the oil filter housing cap.
Here is a link to a You Tube clip on doing your own Metris oil change:
https://www.youtube.com/watch?v=OI5AelzXWzU
|
|
|
|
|
274 150 86 02
Oil Pump Control Valve Harness Metris & Sprinter
2019+ Sprinters and 2016 Metris with 4 CYL gasoline engines
Problematic wiring harness |
|
|
|
|
000 993 21 78
Oil Pump Drive Chain Sprinter 2019+ & Metris 2016+
Only for 4 CYL gasoline engines
|
|
|
|
|
270 010 97 03
Oil Separator-Metris 2016+Oil separator/PCV assembly
|
|
|
|
|
007 542 63 18
Rear Oygen Sensor-2019+ Sprinter 2.0L & METRIS 2016+Rear Oxygen sensor, located after the catalyst
This is the identical Bosch Oxygen sensor sold at a franchise Mercedes dealer for half the price.
|
|
|
|
|
D 176 404 A2
REINZOSIL Sealing Compound - All Models
Reinzosil compound 70 ml tube
Used for engine oil pans (upper or lower), front timing covers, valve covers, front sealing flange, etc. Any application where a seal is necessary but, there is no fiber, rubber, nor metal gasket.
Resistant to mineral and synthetic oils, gasoline, diesel, lubricants, greases, sunlight, ozone, water, and seawater. (Anthracite Colored) Temperature Range: -50 deg. C to +250 deg. C (briefly to +300 deg. C) |
|
|
|
|
611 234 02 93
Serpentine Belt Idler Pulley-Large 2002-2003 2.7L 5 CYL , 2014-2016 2.1L 4 CYL & METRIS 2016+One required
This is the larger diameter pulley with a ribbed surface.
Used on both the 4 CYL and EARLY 2002-2003, 5 CYL diesel engines
|
|
|
|
|
274 200 12 70
Serpentine Belt Tensioner-METRIS 2016+
|
|
|
|
|
6K1705
Serpentine Belt-Sprinter 2.0L 2019 & METRIS 2016+
A single serpentine belt is used on both the 2016+ Metris and 2019+ Sprinter 2.0L 4 CYL
|
|
|
|
|
024 997 10 45
Turbo Oil Feed Line Seal Ring-Metris 2016+Rubber seal ring, for oil feed line to turbocharger, 2 required
|
|
|
|
|
274 096 01 00
Turbo Oil Return Line Gasket-Sprinter 2019+ 4 CYL & Metris 2016+Metal gasket, for oil return line to crankcase, 1 required
|
|
|
|
|
271 187 00 80
Turbo Oil Return Line Grommet-Sprinter 2.0L & Metris 2016+Rubber grommet, for oil return line to crankcase, 1 required
|
|
|
|
|
55 9976 010
Turbocharger Additive - REINZOADD 2002 & LATER
To be used when installing any new turbocharger.
Squirt this tube into the oil feed inlet hole in the center cartridge to prevent damage due to oil starvation during initial start-up.
|
|
|
|
|
274 142 00 80
Turbocharger Flange Seal-Metris 2016+Seal ring at exhaust catalyst pipe
|
|
|
|
|
274 090 32 80
Turbocharger NEW ORIGINAL 2016+ METRIS
New, OEM turbocharger assembly, complete with the exhaust manifold.
This is the exact identical new IHI turbocharger sold at a Mercedes dealership.
SEE REINZOADD PRODUCT BELOW
|
|
|
