|
|
|
612 078 00 00
2002-2003 Sprinter Polymer Fuel Hose Kit ***FREE USA SHIPPING***
Contains the 3 major polymer/nylon fuel lines in the front area of the engine.
These white nylon lines include the horseshoe-shaped retainer clips, where required.
Not for 2004-2006 models.
The fuel return hose that links the five injectors is not included and is shown below.
THIS KIT INCLUDES PREPAID 2 TO 3 DAY POSTAL SHIPPING TO ANY U.S. ZIP CODE.
DO NOT ORDER THIS ITEM FOR SHIPMENT OUTSIDE THE USA. ALL 3 HOSES MAY BE ORDERED
INDIVIDUALLY, IF YOU RESIDE OUTSIDE THE US.
|
|
|
|
|
612 092 00 01X10
2002-2003 SPRINTER-HENGST H216WK Diesel Fuel Filter-10 PACK***FREE USA SHIPPING***Only for 2002-2003 models with OM612 engine
Moisture sensor mounts on filter at bottom
Not for 2004 or any later model year (photo above is generic and does not show the correct boxed filters that you will receive however, the filter brand is the same)
2 to 3 Day free postal shipping to most US Zip Codes included!
|
|
|
|
|
642 092 01 01X10
2004-2009 Sprinter-HENGST H278WK Diesel Fuel Filter-10 PACK ***2 to 3-Day Shipping Included**This is a pack of ten diesel fuel filters
Two o-ring seals are included with each filter
Not for 2002-2003 models, and not for 2010 and later engines.
2 to 3-Day Shipping to any US Zip Code included!
ONLY VALID FOR SHIPPING TO A US ZIP CODE
|
|
|
|
|
33336
Cooling System Oil CleanerCleans the entire cooling system and removes oily deposits caused by blown cylinder head gaskets or internally leaking oil coolers.
|
|
|
|
|
612 092 00 01
Diesel Fuel Filter-HENGST H216WK (OEM) 2002-2003Only for 2002-2003 models with OM612 engines.
Moisture sensor mounts on filter at bottom.
|
|
|
|
|
LM2005
Diesel Purge 2002 & LATER
Label description:
Diesel Purge contains a mixture of agents with powerful cleaning properties. The special additives guarantee corrosion protection and increase ignition performance (Cetane number).
|
|
|
|
|
33151
DPF Catalyst Cleaner
Catalyst/DPF Cleaner
- Dissolves and removes contamination in the diesel particulate filter and catalyst.
- Cleaning without dismantling
- Evaporates residue-free
- Dispense product directly onto DPF core using supplied straw through temperature sensor port on DPF.
|
|
|
|
|
808
DPF Filter Purge
Designed to reduce the ignition temperature of soot collected in the DPF, improving fuel economy and maintaining a clean filter.
|
|
|
|
|
027 997 86 48
Fuel Filter O Ring 2002-2009 SprinterThis O ring is used on the fuel filter moisture sensor. One or two are required, depending upon the model year.
|
|
|
|
|
647 078 07 81
Fuel Hose A 2004-2006 *DISCONTINUED*
*THESE ARE NO LONGER AVAILABLE* This is a U-shaped rubber hose from the fuel filter to the metal pipe.
This hose replaces hose 647 078 02 81, which has been discontinued.
Each end uses a hose clamp, 2 x 13mm, one clamp at each end. |
|
|
|
|
647 078 09 81
Fuel Hose B 2004-2006
This is a rubber fuel hose elbow at the diesel injection pump using 2 x 13mm hose clamps, one at each end.
This hose has one end which has a larger inside diameter on one end of the hose.
Fuel Hose C is similar in appearance however, both ends have the same size inside diameter.
|
|
|
|
|
647 078 08 81
Fuel Hose C 2004-2006This is a rubber fuel hose elbow at the diesel injection pump using 1 x 13mm hose clamp at one end and 1 x 15mm clamp at the other end.
This hose replaces hose 647 078 04 81, which has been discontinued.
This is the lower elbow hose at the injection pump.
The inside diameter of both ends of the hose are the same.
Fuel Hose B is similar in appearance however, both ends have a different size inside and outside diameter.
|
|
|
|
|
612 078 08 81
Fuel Hose D 2002-2003This neoprene diesel fuel hose uses a 13mm hose clamp at each end.
|
|
|
|
|
647 078 10 81
Fuel Hose D 2004-2006
|
|
|
|
|
612 078 07 81
Fuel Hose E 2002-2003 ***NO LONGER AVAILABLE**
NO LONGER AVAILABLE
This hose was discontinued by Mercedes in November 2021.
As there is no replacement available, a section of bulk neoprene fuel hose could be used in it's place.
This neoprene diesel fuel hose uses a 13mm hose clamp at each end.
|
|
|
|
|
647 078 11 81
Fuel Hose E 2004-2006This is a fuel return hose at the fuel distribution rail, using 2 x 13mm hose clamps, one at each end.
This hose replaces hose 647 078 06 81, which has now been discontinued.
|
|
|
|
|
901 476 23 26
Fuel Hose F 2004-2006
BACK IN STOCK
This fuel hose runs from the fuel tank line to the fuel filter.
Approximately 406mm or 16 inches long, and requires two 15mm hose clamps.
|
|
|
|
|
21013
Fuel Injection Hose Clamp 13 mm 2002 & LATER
Clamping Range 12.5 - 14mm
These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.
If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......
2002-2003 Sprinter...................... Order 4 x 13mm clamps
2004-2006 Sprinter...................... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter...................... Order 6 x 13mm clamps & 6 x 15mm clamps
|
|
|
|
|
21015
Fuel Injection Hose Clamp 15mm 2002 & LATERClamping Range 13.5 - 15.5mm
These are special fuel hose clamps with rolled edges and no open serrations so the clamp will not cut into the hose.
If you are replacing all of the original Mercedes factory "Clic" style clamps on a ......
2002-2003 Sprinter........... Order 4 x 13mm clamps
2004-2006 Sprinter........... Order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........... Order 6 x 13mm clamps & 6 x 15mm clamps
|
|
|
|
|
21017
Fuel Injection Hose Clamp 17mm 2002 & LATERClamping Range 16-18 mm
These are special fuel hose clamps with rolled edges and no open serrations so, the clamp will not cut into the hose
If you are replacing replacing all of the original Mercedes factory "Clic" style clamps on a ......
2002-2003 Sprinter........................order 4 x 13mm clamps
2004-2006 Sprinter........................order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter........................order 6 x 13mm clamps & 6 x 15mm clamps
|
|
|
|
|
612 070 04 32
Fuel Line A 2002-2003
This is a shrouded nylon / plastic diesel fuel line with a quick disconnect device at each end.
Seal rings and retainer clips are included.
Runs from high pressure fuel injection pump to fuel distribution rail and pressure control valve.
|
|
|
|
|
612 070 05 32
Fuel Line B 2002-2003
This nylon/plastic diesel fuel line runs from the top of the fuel filter to the low pressure fuel transfer pump.
Seal rings and retainer clips are included.
|
|
|
|
|
612 070 26 32
Fuel Line C 2002-2003
This is a nylon/plastic diesel fuel line with a quick disconnect device at each of the three ends.
Seal rings and retainer clips are included.
This is the feed line from the low pressure transfer pump to the high pressure diesel fuel injection pump. |
|
|
|
|
601 997 03 45
Fuel Line Seal Ring 2002-2003 & 2007-2009
O-ring used at both ends of the white plastic fuel lines on the OM612 5 CYL engine
Also used on 2007-2009 3.0 V6 on end of fuel purge hose where it enters the fuel filter.
Do not order these seal rings if you are ordering new hoses, as the hoses are furnished with the seals already in place.
|
|
|
|
|
001 991 58 70
Fuel Return Line Retainer Clip 2002 & LATERLocated at top of each injector
|
|
|
|
|
611 078 02 49
Fuel Return Valve 2002-2003 SprinterThis valve sits on the top of the fuel filter for the 2002-2003 models ONLY
|
|
|
|
|
901 470 04 05
Fuel Tank Cap 2002-2018Black plastic cap with seal included. |
|
|
|
|
901 476 00 26
Fuel Tank Filler Coupler 2002-2006Connects the filler tube to the fuel tank.
|
|
|
|
|
901 470 13 20
Fuel Tank Filler Neck 2002-2006Approximately 500mm long (20 inches) |
|
|
|
|
LM2002
Super Diesel Additive 2002 & LATER
Description from the Product Label:
Cleans thoroughly and prevents deposits from forming in fuel systems and combustion chambers. Keeps the injectors clean and guarantees improved engine combustion leading to a lower specific fuel consumption and the maximum engine performance.
Prevents seizing and the injector needles from gumming up. Increases the lubrication action of diesel fuels low in sulfur (low sulfur diesel in accordance with DIN EN 590) and protects distributor injector pumps from wear. Increases the Cetane number of diesel fuel, leading to a smooth and gentle combustion process. Contains antioxidant and prevents corrosion. Compatible with all modern diesel oxidation catalytic converters.
THIS PRODUCT MAY ONLY BE SHIPPED BY GROUND TRANSPORTATION (FEDEX GROUND OR UPS GROUND). NO MAIL, NOR AIR SHIPPING IS PERMITTED BY FEDERAL LAW. |
|
|
|
|
11050
Type A Hose Clamp 38-50mmClamping Range 38-50mm
Rolled clamp edge and smooth inside band will not cut into the hose. High quality made in Sweden.
|
|
|
|
|
11056
Type B Hose Clamp 44-56mmClamping Range 44-56mm
Rolled clamp edge and smooth inside band will not cut into the hose.
High quality made in Sweden.
|
|
|
|
|
11065
Type C Hose Clamp 50-65mmClamping Range is 50-65mm.
Rolled clamp edge and smooth inside band will not cut into the hose.
High quality Made in Sweden.
|
|
|
|
|
11044
Type D Hose Clamp 32-44mmClamping Range 32-44mm
Rolled clamp edge and smooth inside band will not cut into the hose. High quality made in Sweden.
|
|
|
|
|
611 078 00 71
Water/Fuel Bleed Screw 2002-2018Located in side of fuel filter, at bottom of canister on 2002-2003 models.
Located on top of fuel filter moisture sensor for 2004-2006 models. (2007-2009 V6 diesels use a different coupling on top, see below)
Located on fuel hose and fuel filter for 2007 and later models
Used for bleeding any water and /or air from fuel filter and fuel system.
|
|
|
