|
|
|
639 528 00 71
Air Filter Housing Screw V6 & 4 Cyl
For air filter housing cover, fits all V6 and 4 cylinder models. |
|
|
|
|
642 200 06 70
Auxiliary Idler Pulley-3.0 L Diesel 2007 & LATERThis is just the pulley on the bracket and not the entire assembly.
This pulley is only used on those models that are equipped an auxiliary A/C system (second compressor).
It DOES NOT include the mounting bracket.
Pulley is smooth, 80mm in diameter and 26mm wide.
|
|
|
|
|
642 091 01 50
Ball Socket 3.0L V6 Diesel 2007 & LATER
Ball socket insert for linkage to intake manifold inlet (swirl) actuator.
|
|
|
|
|
642 050 09 16 KIT
BASIC Timing Chain Kit-SPRINTER 3.0L V6 Diesel 2007-MID 2014
This 6-piece kit contains the timing chain and the four timing chain guides and the oil pump chain guide. All chain guides made in Germany by Febi-Bilstein and Iwis, the OEM suppliers to Mercedes. The original OEM Iwis, DOUBLE ROW, continuous timing chain is part of this kit.
The chain tensioner is not included but, it is available separately and also as part of the complete 7-piece kit, see below.
The oil pump drive chain is also not included but, it is also shown below.
|
|
|
|
|
651 905 01 00
Camshaft Position Sensor 2014-2016 2.1L 4 CylOnly for OM651 4 Cyl engine
|
|
|
|
|
651 052 00 00
Camshaft Timing Sprocket 2014-2016 2.1L 4 CYLTwo are required for each engine. One on the end of each camshaft.
|
|
|
|
|
642 090 59 37
Charge Air Intake Pipe 3.0L V6 2007 & LATER
Charge air intake line, upper end of this pipe joins the output side of the turbo resonator.
|
|
|
|
|
651 050 00 16-KIT
COMPLETE Timing Chain Kit-SPRINTER 2.1L 4 CYL Diesel 2014-2016
This 6-piece kit contains: (1) Timing Chain - with Master Link, (1) Timing Chain Tensioner, (1) Left Chain Guide Rail, (1) Right Chain Guide Rail, & (2) Camshaft Sprockets.
All parts made in Germany by IWIS, the OEM supplier to Mercedes for this part.
|
|
|
|
|
642 050 00 16 KIT
COMPLETE Timing Chain Kit-SPRINTER 3.0L V6 Diesel 2007-MID 2014
Complete 7-piece timing kit, consisting of the timing chain, DOUBLE ROW (continuous), timing chain tensioner and all four timing chain guide rails and the oil pump chain guide rail, for the 3.0L turbodiesel engine, from 2007 thru mid year 2014.
All parts
made in Germany by Febi-Bilstein and Iwis, the OEM suppliers to Mercedes. See other kits and all timing other components, shown below.
|
|
|
|
|
651 030 00 20
Connecting Rod 2.1L 4 Cyl 2014-2016Only for OM651 2.1L 4 Cylinder engine
|
|
|
|
|
642 030 41 20
Connecting Rod 3.0L V6 Diesel 2007-2009Six required, sold individually.
Each connecting rod is complete with two bolts
|
|
|
|
|
642 038 35 71
Connecting Rod Bolt 3.0 V6 Diesel 2007 & LATER
Twelve required (2 bolts per connecting rod), sold individually
|
|
|
|
|
642 030 06 03
Crankshaft Pulley / Vibration Damper 3.0 V6 2007 & LATER
Only for OM642 Turbodiesel engine, AKA HARMONIC BALANCER
Standard pulley/damper for models with or without roof A/C (Dual A/C compressors)
ALWAYS REPLACE THE CRANKSHAFT BOLT AT THE SAME TIME AS THE PULLEY
|
|
|
|
|
651 030 08 03
Crankshaft Pulley/Vibration Damper 2.1L 4 CYL 2014-2016
Only for OM651 4 CYL Turbodiesel engine, AKA HARMONIC BALANCER
Standard pulley/damper for models without roof A/C (Dual A/C compressors)
ALWAYS REPLACE THE CRANKSHAFT BOLTS AT THE SAME TIME AS THE PULLEY
(4 ARE REQUIRED FOR THIS ENGINE)
|
|
|
|
|
642 030 25 03
Crankshaft Pulley/Vibration Damper 3.0 V6-CODE B03 2010-2019Only for OM642 Turbodiesel engine with code B03 AKA HARMONIC BALANCER
ALWAYS REPLACE THE CRANKSHAFT BOLT AT THE SAME TIME AS THE PULLEY
|
|
|
|
|
273 030 03 03
Crankshaft Pulley/Vibration Damper-3.5l Gas Engine 2007-2008Only for M273 Gasoline engine
NOT for OM642 Turbodiesel
aka as a HARMONIC BALANCER
|
|
|
|
|
642 050 08 03
Crankshaft Timing Chain Sprocket - 3.0L V6 Diesel 2007-2014
Crankshaft timing gear / sprocket for Sprinters with double roller chain
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
Curil T
CURIL T Sealing Compound-All Models
High temperature sealant for all types of engine sealing. Can be used with and without a gasket.
75 ml tube
Used for oil pans, front timing covers, valve covers, etc.
Any application where a seal is necessary where there is no fiber, rubber, nor metal gasket.
|
|
|
|
|
651 010 55 11
Cylinder Head - New 2014-2016 2.1L 4 CYL
Only for 2014-2016 2.1L 4 CYL Engine
NEW Cylinder Head by A.M.C. (Made in Spain) with all valves, valve spring and valve guides, pre-installed. No camshafts.
Mercedes dealer sells this cylinder head with no valves, valve guides, springs, etc. & Dodge sells the head as a remanufactured unit. |
|
|
|
|
651 016 02 20
Cylinder Head Gasket 2014-2016 2.1L 4CYL
Head gasket alone, no other gaskets included
|
|
|
|
|
642 010 18 20
Cylinder Head Gasket Set Sprinter 3.0L V6 2007 & LATER
Complete upper gasket set including both head gasket sets and all other gaskets and seals associated with both cylinder heads.
Manufactured by Elring, OEM gasket supplier to Mercedes for this part.
|
|
|
|
|
000 997 62 20
Cylinder Head Plug - 30 MM 2007 & LATER 3.0L V6
Located on end of cylinder head
30 MM diameter or approx 1 and 3/16 inches
|
|
|
|
|
000 997 63 20
Cylinder Head Plug - 40 MM 2007 & LATER3.0L V6
Located on end of cylinder head.
40 MM diameter or approx 1 and 9/16 inches.
|
|
|
|
|
003 990 25 22
Cylinder Headbolt Set - 204mm 3.0L V6 Diesel 2007 & LATER
M8, 204mm (approx 8 inches long) cylinder head bolt, 8 per cylinder head. Order two sets if doing both heads.
Sold as a set of 8.
|
|
|
|
|
642 010 08 67
Engine Cover 3.0L V6 2007 & LATERPlastic cover on top of V6 Sprinter engine. Metal heat shield on the underside is included.
|
|
|
|
|
642 094 07 85
Engine Cover Grommets - V6 and 4Cyl
Plastic engine cover grommets, fits the 3.0L V6 and the 2.1 4cyl engines
|
|
|
|
|
906 241 17 13
Engine Mount - 3.0 V6 Diesel Engine 2007 & LATER
2 required, Fits both Left and Right side
Sold in increments of 1
Used only on V6 turbodiesel engines
|
|
|
|
|
906 241 11 13
Engine Mount-3.5 Liter Gas Engine 2007-20082 required
Sold in increments of 1
Used only on V6 gasoline engines |
|
|
|
|
651 010 03 13
Engine Oil Pan 2014-2016 2.1L 4 CYL
Only for 2.1L 4 Cyl engines
See oil pan gasket shown below.
|
|
|
|
|
642 050 05 27
Exhaust Valve-3.0L V6 Diesel 2007 & LATERExhaust valve sold individually, 12 required for OM642 engine
|
|
|
|
|
642 030 05 12
Flex Plate/Ring Gear-3.0L V6 Diesel 2007 & LATERLocated between end of crankshaft & torque converter (bolts to face of torque converter)
AKA starter ring gear
|
|
|
|
|
001 990 14 03
Front Crankshaft Bolt 2.1L 4 CYL 2014-2016
Located in center of crankshaft pulley. Secures pulley to front of crankshaft.
4 bolts are required for this engine
|
|
|
|
|
000000-005724
Front Crankshaft Bolt 3.0L V6 2007 & LATER
Located in center of crankshaft pulley. Secures pulley to front of crankshaft.
|
|
|
|
|
014 997 25 46
Front Crankshaft Seal 2.1L 4 CYL 2014-2016Only for OM651 4 CYL
|
|
|
|
|
023 997 84 47-MB
Front Crankshaft Seal 2.7L & 3.0 V6 2002 & LATER - Genuine Mercedes
Fits all Sprinter 2.7L I-5 and V6 diesel engines.
Genuine Mercedes part. |
|
|
|
|
023 997 84 47-ELRING
Front Crankshaft Seal 2.7L & 3.0L V6 2002 & LATER - Elring
Fits all Sprinter 2.7L I-5 and V6 diesel engines. |
|
|
|
|
604 990 00 40
Front Crankshaft Washer 2002 & LATER
Located at front crankshaft pulley between the bolt and the pulley.
Used on all five cylinder and V6 engines
|
|
|
|
|
642 010 00 33
Front Timing Cover 2007 & LATER 3.0L V6 DieselCovers the front of the engine, houses the timing chain and guides. Includes the front crankshaft seal.
|
|
|
|
|
651 010 01 69-MB
Genuine Mercedes - Oil Fill Tube 4 Cyl
Oil fill tube for 4 cylinder engines only. |
|
|
|
|
651 180 01 09-MB
Genuine Mercedes - Oil Filter 2.1L 4 Cyl Diesel 2014 & Later
Only for 2014 & Later, 2.1 Liter OM651 inline 4 cylinder diesel engine
The OM651 2.1 liter 4 cylinder turbo engine oil capacity is 11.5 liters or 12.16 US quarts.
Seal ring is not included with the filter.....see below. |
|
|
|
|
000 010 16 85-MB
Genuine Mercedes Oil Fill Cap - SPRINTER 2002 & LATER + METRIS 2016+
Oil fill cap in valve cover or at end on extension tube on later V6 engines
|
|
|
|
|
651 050 00 80
Hydraulic Valve Lifter/Cam Follower 2.1 L 4 CYL 2014-2016Cam follower or lifter
4 per cylinder or 16 total, per engine
Sold in increments of 1 each |
|
|
|
|
642 050 00 80
Hydraulic Valve Lifter/Cam Follower 3.0L V6 2007 & LATERCam follower or valve lifter
4 per cylinder or 24 total, per engine
Sold in increments of 1 each |
|
|
|
|
642 098 00 37
Intake Pipe Socket 3.0L V6 DIESEL - 2007 & LATER
Furnished with both o-rings, which are not available as a separate item.
|
|
|
|
|
642 016 51 20
Left Cylinder Head Gasket 3.0 V6 Diesel 2007 & LATER
Head gasket for the Left or Driver's side cylinder bank
|
|
|
|
|
906 241 15 13
Left Engine Mount-2.1L 4 CYL Diesel Engine 2014-2016Left or Driver's side
Left and Right mounts are different for this engine
Used only on 2.1L 4 CYL turbodiesel engines |
|
|
|
|
642 052 17 01
Left Exhaust Camshaft Sprocket-3.0L V6 Diesel 2007-2014
Only for OM 642 3.0L V6 turbodiesel engine
For double roller chain only.
Supersedes old sprocket 642 052 00 01
|
|
|
|
|
642 052 19 01
Left Exhaust Camshaft Sprocket-3.0L V6 Diesel Mid 2014 & LATER
For SINGLE roller chain only.
Only for OM 642 3.0L V6 turbodiesel engine Mid 2014 and later
|
|
|
|
|
642 010 14 28
Lower Engine Oil Pan 2007 & LATER 3.0L V6
Fits the 3.0 Liter V6 diesel
This pan is cast aluminum, silver in color.
There is no gasket used for this oil pan. Use liquid sealant.
|
|
|
|
|
642 033 19 01-25mm O/S
Main Bearing Set - 1ST RPR 75.75mm 3.0L V6 Diesel 2007 & LATER
1st Repair Size .25mm oversize OR 75.75mm, for undersize ground crankshaft.
Complete set of all four bearing shell pairs (8 shells in total).
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 033 19 01-STD SIZE
Main Bearing Set-STD 76mm 3.0L V6 Diesel 2007 & LATER
Complete set of all four bearing shell pairs in STANDARD SIZE 76.00mm (8 shells in total)
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 011 02 71
MAIN CAP BOLT - 3.0L V6 Diesel 2007 & LATER
13 REQUIRED
|
|
|
|
|
642 011 03 71
MAIN CAP BOLT - 3.0L V6 Diesel 2007 & LATER
3 REQUIRED
|
|
|
|
|
910105-010011
MAIN CAP BOLT- 3.0L V6 Diesel 2007 & LATER
8 REQUIRED
|
|
|
|
|
651 180 01 09-MAHLE
OEM Oil Filter - MAHLE 2.1L 4 Cyl Diesel 2014 & Later
OEM part - Only for 2014 & Later, 2.1 Liter OM651 inline 4 cylinder diesel engine
The OM651 2.1 liter 4 cylinder turbo engine oil capacity is 11.5 liters or 12.16 US quarts.
Seal ring is not included with the filter.....see below. |
|
|
|
|
642 180 99 00
Oil Cooler Change Gasket / Seal Kit 2007 & LATER 3.0L V6 Diesel
All necessary seals and gaskets required to change out the engine oil cooler.
All items in this kit are a combination of Genuine Mercedes and OEM supplied gaskets from Elring and Reinz.
A few other gaskets and seal rings that you may want to consider changing are listed below. |
|
|
|
|
000 010 16 85-AFT
Oil Fill Cap - SPRINTER 2002 & LATER + METRIS 2016+
Oil fill cap in valve cover or at end on extension tube on later V6 engines
|
|
|
|
|
651 180 01 09-HENGST
Oil Filter - HENGST 2.1L 4 Cyl Diesel 2014 & Later E11HD204
Only for 2014 & Later, 2.1 Liter OM651 inline 4 cylinder diesel engine
The OM651 2.1 liter 4 cylinder turbo engine oil capacity is 11.5 liters or 12.16 US quarts.
Seal ring is not included with the filter.....see below.
|
|
|
|
|
651 180 01 09-MANN
Oil Filter - MANN 2.1L 4 Cyl Diesel 2014 & Later
Only for 2014 & Later, 2.1 Liter OM651 inline 4 cylinder diesel engine
The OM651 2.1 liter 4 cylinder turbo engine oil capacity is 11.5 liters or 12.16 US quarts.
Seal ring is not included with the filter.....see below. |
|
|
|
|
651 180 01 38
Oil Filter Housing Cap 2.1L 4 Cyl. 2014-2016Only for OM651 2.1L 4 CYL Diesel
|
|
|
|
|
000 905 04 01
Oil Level Sender 3.0L V6 2007-2022 & 2.1L 4CYL 2014-2016
Located at oil pan, o-ring seal included
|
|
|
|
|
102 014 00 33
Oil Pan End Plug 2002-2006Located at rear end of engine oil pan
|
|
|
|
|
651 014 00 28
Oil Pan Gasket 2014-2016 2.1L 4 CYLOil pan gasket only for the 2.1L 4 Cyl engine
|
|
|
|
|
000 993 69 20
Oil Pump Chain Tensioning Spring 2007 & LATER 3.0L V6
Tensioning spring for oil pump drive chain slide rail
|
|
|
|
|
642 181 00 80
Oil Pump Seal-2007 & LATER 3.0L V6Seal between engine block and oil pump
|
|
|
|
|
642 030 00 24
Piston Ring Set 3.0L V6 Diesel 2007 & LATER
Standard size (83.00mm bore) piston ring set for one piston. (Oversize rings are not available)
Sold as an individual set for one piston, six sets required per engine.
|
|
|
|
|
642 030 12 17 54-.50mm O/S
Piston-1ST RPR 83.50mm, RIGHT SIDE 3.0L V6 2007 & LATER1st repair size piston 83.50mm for 3.0L V6 Diesel engine, RIGHT CYLINDER BANK ONLY
Furnished with rings, pin and pin retainer clips.
Sold individually, three required.
Also available in Standard size.....See below
|
|
|
|
|
642 030 13 18 54-.50mm O/S
Piston-1ST RPR 83.50mm, LEFT SIDE 3.0L V6 2007 & LATER1st repair size piston 83.50mm for 3.0L V6 Diesel engine, LEFT CYLINDER BANK ONLY
Furnished with rings, pin and pin retainer clips.
Sold individually, three required.
Also available in Standard size.....See below
|
|
|
|
|
642 030 15 17 54-STD
Piston-STANDARD 83.00mm, LEFT SIDE 3.0L V6 2007 & LATER
+++ CURRENTLY SOLD OUT +++
Standard size piston (83.00mm) for 3.0L V6 Diesel engine, LEFT CYLINDER BANK ONLY.
Furnished with rings, pin and 2 pin retainer clips. Sold individually, Three required.
Also available in 1st repair, .25 mm O/S - See Below. |
|
|
|
|
642 030 12 17 54-STD
Piston-STANDARD 83.00mm, RIGHT SIDE 3.0L V6 2007 & LATER
Standard size (83.00mm) piston for 3.0L V6 Diesel engine, RIGHT CYLINDER BANK ONLY
Furnished with rings, pin and pin retainer clips. Sold individually, THREE required.
Also available is 1st repair, .25 mm O/S..... See below.
|
|
|
|
|
642 010 02 14
Rear Crankshaft Seal & Housing 3.0 V6 2007 & LATER
Rear crank seal, complete with housing.
This product is from Elring, an original equipment manufacturer for Mercedes.
The rear seal is also available by itself.....see below.
|
|
|
|
|
014 997 26 46
Rear Crankshaft Seal 2.1L 4 CYL 2014-2016
Only for OM651 4 CYL
|
|
|
|
|
642 010 02 14-SEAL
Rear Crankshaft Seal 3.0 V6 2007 & LATER
Rear crank seal only, without housing.
Also available with the housing, see below.
|
|
|
|
|
D 176 404 A2
REINZOSIL Sealing Compound - All Models
Reinzosil compound 70 ml tube
Used for engine oil pans (upper or lower), front timing covers, valve covers, front sealing flange, etc. Any application where a seal is necessary but, there is no fiber, rubber, nor metal gasket.
Resistant to mineral and synthetic oils, gasoline, diesel, lubricants, greases, sunlight, ozone, water, and seawater. (Anthracite Colored) Temperature Range: -50 deg. C to +250 deg. C (briefly to +300 deg. C) |
|
|
|
|
642 016 52 20
Right Cylinder Head Gasket 3.0 V6 Diesel 2007 & LATER
Contains head gasket for the Right or Passenger's side cylinder bank
|
|
|
|
|
906 241 16 13
Right Engine Mount - 2.1L 4 CYL Diesel Engine 2014-2016
Right side or Passenger's side mount
Left and Right mounts are different for this engine.
Used only on 2.1L 4 CYL turbodiesel engines |
|
|
|
|
642 052 18 01
Right Intake Camshaft Adjuster Sprocket-3.0L V6 Diesel 2007-2014
For double roller chain ONLY, 1 required
Supersedes old sprockets 611 052 05 01 and 646 050 01 49
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
646 050 02 49
Right Intake Camshaft Sprocket-3.0L V6 Diesel 2007-2014
For double roller chain ONLY, 1 required
Supersedes old sprockets 611 052 05 01 and 646 050 01 49
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
651 050 00 33
Rocker Arm 2.1L 4 CYL Diesel 2014-2016Sold individually, 16 per engine
|
|
|
|
|
642 050 01 33
Rocker Arm 3.0L V6 Diesel 2007 & LATERSold individually, 24 per engine
|
|
|
|
|
642 030 02 60-.25mm O/S
Rod Bearing Set - 1ST RPR 63.75mm 3.0L V6 Diesel 2007-2022
1st repair size (.25mm oversize or 63.75mm) for undersize ground crankshaft.
Complete set of all six pair of bearing shells (12 shells total).
Dealer sells these as individual pairs. We sell them in a complete set of six pairs.
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 030 02 60-STD SIZE
Rod Bearing Set - STD 64mm 3.0L V6 Diesel 2007 & LATER
Standard size 64mm diameter
Complete set of all six pair of bearing shells (12 shells total). Dealer sells these as individual pairs.
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
651 030 00 60
Rod Bearing Set-STD 2.1L 4 Cyl 2014-2016Only for OM651 2.1L 4 Cylinder engine
|
|
|
|
|
642 030 02 60-STD SIZE MB
Rod Bearing Set-STD 64mm 3.0L V6 Diesel 2007 & LATERStandard size 64mm diameter
Sold as one PAIR - For complete set, you need 6 PAIRS.
These bearing sets are available in two sizes. Standard and first repair.
|
|
|
|
|
642 030 00 62
Thrust Bearing Set-STD 3.0L V6 Diesel 2007 & LATER
2.15mm/Standard
Look at main bearing cap 642 011 02 11 and remove the thrust bearing halves.
These are furnished as a set of both upper and lower halves (four bearing halves)
The photo only shows 50% of what you will receive.
The thrust bearings limit the horizontal forward & backward travel of the crankshaft
|
|
|
|
|
000 993 63 76 C
Timing Chain - DOUBLE ROW CONTINUOUS 3.0L V6 Diesel 2007-MID 2014
DOUBLE ROW timing chain for 3.0L V6 Diesel engines, thru mid year 2014.
This is a closed or continuous timing chain. There is no separable master link.
Replacing this chain requires removing the front timing cover.
|
|
|
|
|
000 993 71 76 L
Timing Chain - SINGLE ROW WITH LINK 3.0L V6 Diesel MID 2014 & LATER
SINGLE ROW TIMING CHAIN for later model 3.0L V6 Diesel engines.
This chain has a master link. See continuous chain version below.
|
|
|
|
|
651 050 00 16
Timing Chain Clamping Rail-2.1L 4 Cyl Diesel 2014-2016OM 651 2.1L turbodiesel engine
This is the larger of the two chain rails and it interfaces with the timing chain tensioner on the right side of the engine.
|
|
|
|
|
642 050 26 00
Timing Chain Guide Rail Kit - 3.0L Diesel 2007-MID 2014
ONLY FOR ENGINES WITH DOUBLE ROW TIMING CHAIN, 2007 AND LATER, UP TO MID 2014
Set of all five chain guides are included in the kit. Four timing chain guides and one oil pump chain guide for 3.0L turbodiesel engine. None of these guides are available as separate pieces and only as this complete kit. See other components shown below.
All parts
made in Germany by Febi-Bilstein, OEM supplier to Mercedes.
|
|
|
|
|
642 050 27 00
Timing Chain Guide Rail Kit-3.0L Diesel -MID 2014 & LATER
ONLY FOR ENGINES WITH SINGLE ROW TIMING CHAIN, MID 2014 AND LATER
Set of all five chain guides are included in the kit. Four timing chain guides and one oil pump chain guide for the later 3.0L turbodiesel engine. None of these guides are available as separate pieces and only as this complete kit. See other components shown below.
All parts
made in Germany by Febi-Bilstein, the OEM supplier to Mercedes.
|
|
|
|
|
651 052 01 00
Timing Chain Guide Rail-2.1L 4 Cyl Diesel 2014-2016OM 651 2.1L 4 CYL Turbodiesel engine
This rail is the smaller of the two chain rails and it is located on the left side of the engine.
|
|
|
|
|
651 050 08 00
Timing Chain Tensioner-2.1L 4 Cyl Diesel 2014-2016This tensioner is manufactured by Iwis, the OEM supplier to Mercedes
|
|
|
|
|
642 050 03 11
Timing Chain Tensioner-3.0L V6 Diesel 2007 & LATER
Only for OM 642 3.0L V6 turbodiesel engine
This chain tensioner is used on both double row chains and single row chains.
The chain and chain guides are different but, the tensioner is the same.
|
|
|
|
|
272 050 08 11
Timing Chain Tensioner-3.5L Gas Engine 2007-2008Only for M272 3.0L V6 gasoline engine |
|
|
|
|
642 230 00 65
Vacuum Pump 2007 & LATER 3.0L V6 Diesel
Mounted to cylinder head. This pump is manufactured by Pierburg, the original supplier to Mercedes.
For gasket between pump and engine, see below
|
|
|
|
|
642 016 02 80
Vacuum Pump Gasket 2007 & LATER
For 3.0L V6 vacuum pump, See Below.
|
|
|
|
|
651 010 91 18
Valve Cover 2014-2016 4CYL Sprinter
Fits the OM651 2.1 Liter 4 cylinder engines 2014-2016 only.
Includes gasket, bolts and crankcase breather/separator which is not available separate.
|
|
|
|
|
651 016 03 21
Valve Cover Gasket 2014-2016 2.1L 4 CYL
|
|
|
|
|
000 053 56 58
Valve Stem Seal Kit 2014-2016 2.1L 4 CYL Diesel
1 kit is required for each cylinder.
Sold in increments of 1.
Order four kits, if you are doing the entire engine.
|
|
|
|
|
000 053 51 58
Valve Stem Seal Kit 3.0L V6 Diesel 2007 & LATER
1 kit is required for each cylinder.
Sold in increments of 1.
Order six kits if you are doing the entire engine.
|
|
|
|
|
006888-005012
Woodruff Key for Crankshaft Pulley 2007 & LATER 3.0L V6
Only for OM642 V6 3.0 L
|
|
|