|
|
|
|
000 905 14 05
Exhaust Temperature Sensor #3 2010 & LATER
ONLY FOR 3.0L V6 BLUETEC ENGINES 2010 AND LATER
Mercedes part # 000 905 14 05
Located before Turbocharger, has 45 degree bend.
Manufactured by VDO, the OEM supplier to Mercedes.
|
|
|
|
|
008 153 22 28
Exhaust Temperature Sensor 4 CYL 2.1LLocated in exhaust manifold before turbochargers.
|
|
|
|
|
001 905 30 00
Exhaust Temperature Sensor 4 CYL 2.1L 4 CYLLocated in DPF
For Sprinter 4 cylinder 2.1 liter.
|
|
|
|
|
651 050 01 27
Exhaust Valve-2.1L 4 CYL Diesel 2014-2016Exhaust valve sold individually, 8 required for OM651 engine
|
|
|
|
|
642 050 05 27
Exhaust Valve-3.0L V6 Diesel 2007 & LATERExhaust valve sold individually, 12 required for OM642 engine
|
|
|
|
|
642 141 01 00
Exhaust Y-Pipe Collector at Turbo 2007 & LATER
Cast iron Y-shaped collector pipe/manifold, from turbocharger to the exhaust manifolds.
Gaskets for this unit are shown below.
|
|
|
|
|
000 490 14 41
Exhaust/DPF Clamp-65MM 2014-2016 4 CYL
Located at the joint at the OUTPUT end of the DPF, where it joints the pipe.
This clamp is for a 65MM OD tube (approx 76MM expanded)
This clamp is also used on 2014+ 2.1L 4 CYL engines
|
|
|
|
|
906 528 26 82-MB
Genuine Mercedes - Charge Air Hose-Intercooler to Engine3.0L V6 Diesel 2010 & LATER
Located on the Passenger's side of the engine - This is the shorter of the two charge-air hoses. Seal rings are provided with hose.
This hose will fit all NCV3 model years, and early VS30 models. IF you are ordering for a 2019+ carefully check the current intercooler and intercooler hose that you have to order the correct hose. This hose fits the passenger side for 2019+ Models with the 907 501 17 00 Inte |
|
|
|
|
906 528 50 82-MB
Genuine Mercedes Charge Air Hose TYPE A-Turbocharger to Intercooler 2.1L 4Cyl 2014-2016Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the longer version of the two different hoses.
THIS HOSE IS ONLY FOR THOSE MODELS WITH STANDARD AIR CONDITIONING, WHICH HAS A SINGLE COMPRESSOR.
THE OTHER VERSION FOR DUAL A/C COMPRESSORS (ROOF MOUNTED A/C), IS SHOWN BELOW.
|
|
|
|
|
642 142 05 80
Intake Gasket 3.0L V6 2007 & LATERLocated on end of left intake manifold to forward extension of manifold.
|
|
|
|
|
272 140 24 01
Intake Manifold 3.5L Gas Engine 2007-2008Complete intake manifold assembly.
The holes for the throttle housing mount are not threaded. The mounting bolts are self tapping.
|
|
|
|
|
651 090 00 37
Intake Manifold 2.1L 4 CYLOnly for 4 cylinder 2.1 Liter engines 2014+
Seals and actuator are included.
|
|
|
|
|
642 144 00 35
Intake Manifold Actuator Linkage Repair Kit 3.0L V6 2007 & LATER
Located on the right side intake manifold and is connected to the inlet or swirl valve actuator.
Consists of two linkage components - one metal and one polymer.
|
|
|
|
|
642 141 05 80
Intake Manifold Gasket 3.0L V6 2007 & LATER
Two are required, one for each cylinder head to manifold, sold individually, left and right are the same.
Order two, if doing both intake manifolds.
|
|
|
|
|
642 150 04 94
Intake Manifold Inlet Actuator 3.0L V6 2007 & LATER+AKA: Idle Air Speed Motor / Servo or Swirl Valve Actuator / Motor
This part is made by Pierburg and is the exact same part that is sold at a Dodge or Mercedes Benz dealer.
Same part, same warranty, same OEM German manufacturer but, in their box and not a Mercedes box.
Located on the Right Side of intake manifold.
When installing this actuator, you must insure that the linkage that attaches to it is moving freely. Stuck linkage will cause the new actuator to quickly burn out.
|
|
|
|
|
013 997 00 45
Intake Manifold O Ring 3.0L V6 2007 & LATERLocated at right side of intake manifold
|
|
|
|
|
272 198 24 01
Intake Manifold Repair Kit 3.5L Gas Engine 2007-2008Intake Manifold Adjuster Repair Kit
Kit includes aluminum linkage connector plate (bell crank
lever), re-designed vacuum element with aluminum rod and silicon
diaphragm, bolt and washer.
|
|
|
|
|
642 098 07 80
Intake Manifold to Transverse Charge Air Pipe Gasket 2007-2009This gasket is located between the left intake manifold and the crossover manifold
|
|
|
|
|
642 098 00 37
Intake Pipe Socket 2007 & LATER 3.0L V6 DIESELFurnished with both o-rings, which are not available as a separate item.
|
|
|
|
|
651 050 01 01
Intake Valve-2.1L 4 CYL Diesel 2014-2016Intake valve, sold individually, 8 required
|
|
|
|
|
642 053 04 01
Intake Valve-3.0L V6 Diesel 2007 & LATERIntake valve, sold individually, 12 required
|
|
|
|
|
642 052 17 01
Left Exhaust Camshaft Sprocket-3.0L V6 Diesel 2007-2014
Only for OM 642 3.0L V6 turbodiesel engine
For double roller chain only.
Supersedes old sprocket 642 052 00 01
|
|
|
|
|
642 052 19 01
Left Exhaust Camshaft Sprocket-3.0L V6 Diesel Mid 2014 & LATER
For SINGLE roller chain only.
Only for OM 642 3.0L V6 turbodiesel engine Mid 2014 and later
|
|
|
|
|
642 140 09 09
Left Exhaust Manifold 3.0 V6 Diesel 2007 & LATEROnly for left (driver's) side cylinder bank
OM642 Turbodiesel engine
|
|
|
|
|
642 090 29 37
Left Intake Manifold 3.0 V6 2007-2009For left cylinder bank (driver's side of engine)
The photo of this manifold is not accurate, as it shows a right side manifold and not the left side.
The inlet air actuator is located on the other (right side) manifold. See listing below.
|
|
|
|
|
642 090 69 37
Left Intake Manifold 3.0L V6 2010 & LATEROnly for BlueTec engines 2010+
For left cylinder bank (driver's side of engine)
|
|
|
|
|
272 141 22 80
Left Intake Manifold Gasket 3.5L V6 Gas Engine 2007-20081 required, sold individually.
Left and right sides are different.
|
|
|
|
|
000 905 35 03
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2010-2016
Only for BlueTec engines 2010 and later. (TWO REQUIRED FOR 3.0L V6 DIESEL)
This part has changed numbers many times, 000 905 35 03, 000-905-30-00, 000-905-70-00, 003-542-88-18, 006-542-72-18. It is best to get the number off your old unit to confirm.
FOR THE 2.1L 4 CYL ENGINE ONLY ONE OF THESE IS REQUIRED AND ONE OF A DIFFERENT PART NUMBER IS ALSO REQUIRED. THIS IS THE FRONT NOx SENSOR FOR THE 4 CYL ENGINE.
|
|
|
|
|
000 905 96 03
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2016+
Only for BlueTec engines 2016 and later
This part has changed numbers many times, 000-905-96-03, 000 905-00-08, 000-905-27-09, 000-905-84-11.
It is best to get the number off your old unit to confirm.
|
|
|
|
|
000 905 85 11
NOx Sensor 3.0L V6 & 2.1L 4 CYL 2016+
Only for BlueTec engines 2016 and later
Also known as 000 905 85 11, 000 905 28 09, 000 905 97 03
|
|
|
|
|
006 542 49 18
Oxygen Sensor 3.0 V6 2010 & LATER & 2014-2016 2.1L 4 CYLFits all 3.0 liter Diesel Engines from 2010 and later and the 2014-2016 4 CYL engines (BlueTec)
|
|
|
|
|
642 140 08 09
Right Exhaust Manifold 3.0 V6 Diesel 2007 & LATEROnly for right (passenger's) side cylinder bank
OM 642 Turbodiesel engine
|
|
|
|
|
642 052 18 01
Right Intake Camshaft Adjuster Sprocket-3.0L V6 Diesel 2007-2014
For double roller chain ONLY, 1 required
Supersedes old sprockets 611 052 05 01 and 646 050 01 49
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
646 050 02 49
Right Intake Camshaft Sprocket-3.0L V6 Diesel 2007-2014
For double roller chain ONLY, 1 required
Supersedes old sprockets 611 052 05 01 and 646 050 01 49
Only for OM 642 3.0L V6 turbodiesel engine
|
|
|
|
|
642 090 38 37
Right Intake Manifold 3.0 V6 2007-2009Includes inlet actuator, aka: swirl actuator or turbo boost pressure servo ), which is also available as a separate unit, see below
For right cylinder bank (passenger's side of engine)
|
|
|
|
|
642 090 06 37
Right Intake Manifold 3.0 V6 2010 & LATER
Includes turbo boost pressure servo/Intake Manifold Inlet Actuator.
For right cylinder bank (passenger's side of engine)
Only for BlueTec engines 2010+
|
|
|
|
|
272 141 23 80
Right Intake Manifold Gasket 3.5L V6 Gas Engine 2007-20081 required, sold individually.
Left and right sides are different.
|
|
|
|
|
000 492 09 81
Seal Ring - Turbocharger to Exhaust 2004-2006 5 CYL & 2014-2016 2.1L 4 CYL
Located at joint between the turbocharger and the front pipe at the clamp area
This seal ring is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL engines
|
|
|
|
|
651 090 04 70
Throttle Body 2.1L 4 CYL 2014-2016
Complete original unit for all 2.1L 4 CYL diesel engines.
|
|
|
|
|
642 090 02 70
Throttle Body 3.0L V6 Diesel 2007 & LATER
Complete original unit for all 3.0L V6 diesel engines.
This is the identical brand new Bosch unit as sold at a franchise dealership.
This fits both standard and BlueTec models throughout the entire range of production.
|
|
|
|
|
113 141 01 25
Throttle Body 3.5L V6 Gas Engine 2007-2008Throttle body Only for 3.5L Gas engine
|
|
|
|
|
651 091 04 60 64
Throttle Body Gasket 2.1L 4 CYL Diesel 2014-2016
Only for 2.1L 4 CYL diesel engines.
|
|
|
|
|
272 141 09 80
Throttle Body Gasket 3.5L V6 Gas Engine 2007-2008Only for 3.5L Gas Engine
|
|
|
|
|
642 141 01 80
Throttle Body Seal Ring 2007 & LATER 3.0L V6 DieselLocated between throttle body and throttle body flange
|
|
|
|
|
642 098 08 80
Throttle Body to Transverse Charge Air Pipe Gasket 2007 & LATERLocated between Throttle body and cross-over pipe
|
|
|
|
|
000 993 82 76
Timing Chain 2.1L 4 Cyl 2014-2016Timing chain, with master link
|
|
|
|
|
642 050 26 00
Timing Chain Guide Rail Kit-3.0L Diesel 2007-MID 2014
ONLY FOR ENGINES WITH DOUBLE ROW TIMING CHAIN, 2007 AND LATER, UP TO MID 2014
Set of all five chain guides are included in the kit. Four timing chain guides and one oil pump chain guide for 3.0L turbodiesel engine. None of these guides are available as separate pieces and only as this complete kit. See other components shown below.
All parts
made in Germany by Febi-Bilstein, OEM supplier to Mercedes.
|
|
|
|
|
000 993 71 76 L
Timing Chain-SINGLE ROW WITH LINK 3.0L V6 Diesel MID 2014 & LATER
SINGLE ROW TIMING CHAIN for later model 3.0L V6 Diesel engines.
This chain has a master link. See continuous chain version below.
|
|
|
|
|
642 140 00 00
Turbo Resonator 3.0L V6 Diesel 2007 & LATER
Only for OM642 3.0L V6 Turbodiesel engine
This is the most current revision of this item, which supersedes four earlier part numbers, all of which have been discontinued by Mercedes. This unit is located between the output side of the turbocharger and the aluminum charge air intake pipe.
The seal and o-ring on each end of this unit (as pictured below) are provided with the new resonator.
|
|
|
|
|
642 016 10 38
Turbo Resonator Bracket 3.0L V6 Diesel 2007 & LATERAluminum bracket that bolts directly to the turbo resonator.
There are numerous brackets and they possibly changed after 2010. It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering.
The part# for this is 642 016 10 38. |
|
|
|
|
