2007 & LATER Sprinter 3.0 V6 Serpentine Belt Kit ***FREE USA SHIPPING*** Complete kit, as shown. Tensioner is made by Litens, pulleys by INA and belt by ContiTech. All three manufacturers are original equipment suppliers to Mercedes.
2-3 Day Shipping to any US Zip Code included! Not valid for shipping outside the USA.
Do not order if you are NOT shipping to a USA address. If you wish to ship outside the USA, please order all of the items in the kit individually.
Coolant Circulation Pump 2007 & LATER Electric water pump in heater hose circuit
aka auxiliary water pump
Coolant Temperature Sensor 2002 & LATER
Coolant t emperature sending unit manufactured by Hella, an OEM supplier to Mercedes.
Located on the thermostat housing and/or on the intake manifold, depending upon the model year.
90 degree electrical plug connection. Held in place by metal clip.
A new o-ring seal is included.
Fan Bearing Bracket-3.0L V6 Diesel 2007 & LATER
The fan blade and fan clutch mount directly to this bracket.
Previous MB part numbers (NOW OBSOLETE) are:
642 200 02 20
642 200 04 20
The shaft bearing inside this unit is a common failure area and the bearing is not available as a separate unit.
Fan Clutch w/Fan Blade 3.0L V6 2010 & LATER
Only for the OM 642 3.0L V6 diesel engine 2010 and later (BlueTec)
These are manufactured by Borg Warner, the OEM supplier to Mercedes Benz. This is the identical unit as those sold at a franchise dealer.
The fan clutch for the 2010 and later engines has an electrically actuated clutch. The earlier models have a centrifugal declutching mechanism.
Approximately 515mm in diameter (20.5 inches)
Fan Drive Pulley 3.0 L Diesel 2007 & LATER 1 required
Mounts to fan bearing bracket shown below
Radiator Fan Drive Belt 3.0L V6 2007 & LATER Drives only the radiator cooling fan and ONLY on those models that DO NOT have DUAL A/C
(Roof mounted A/C) with two A/C compressors. If you have dual A/C, see the auxiliary belt shown below.
This is a very short belt compared to the main serpentine belt
Serpentine Belt V6 Diesel 2007 & LATER
Only for 3.0 Liter diesel
This is the main serpentine belt.
Both the radiator fan drive belt (very short belt) and serpentine belt for those vehicles with auxiliary (roof mounted) A/C are shown below.
Serpentine Belt-Sprinter 2.0L 2019 & METRIS 2016+ A single serpentine belt is used on both the
2016+ Metris and 2019+ Sprinter 2.0L 4 CYL
Water Pump Gasket 3.0L V6 2007 & LATER Metal, teflon coated gasket.
Water Pump-3.0L V6 Diesel Engine 2007 & LATER
Used on all 3.0 Liter V6 diesels with seven groove pulley/belt combination.
The gasket to the engine block is provided with the pump.