|
|
|
2004-2009 Sprinter-HENGST H278WK Diesel Fuel Filter-10 PACK ***2 to 3-Day Shipping Included**This is a pack of ten diesel fuel filters
Two o-ring seals are included with each filter
Not for 2002-2003 models, and not for 2010 and later engines.
2 to 3-Day Shipping to any US Zip Code included!
ONLY VALID FOR SHIPPING TO A US ZIP CODE
|
|
|
|
|
2007-2009 Sprinter 3.0 V6 Diesel Fuel Hose Kit ***FREE USA SHIPPING***REQUIRES SIX 13MM AND SIX 15MM HOSE CLAMPS, SHOWN BELOW.
All the six small fuel hoses in and around the engine compartment, labeled A thru F on our site. All are original Mercedes parts.
The fuel return hose assembly (H) and drain/purge line (G) are NOT included. You can see these two hoses below
|
|
|
|
|
Diesel Fuel Filter-HENGST H413WK 2.1L 4 Cyl Engine 2014-2016Only for 4 cylinder two stage turbo diesel engine, beginning in model year 2014
Has 5-pin electrical connector on a non-removable moisture sensor, along with a water purge valve and drain hose.
|
|
|
|
|
Diesel Fuel Filter-HENGST H278WK (OEM) 2004-2009Two O-ring seals are included with the filter, which are to be used on the moisture sensor in the center of the filter element.
These are for 2004 to 2009 model years only
Not for 2002-2003 nor, for any Sprinter engine 2010 and later.
If you are planning on removing and replacing the original Clic style fuel hose clamps on top of the filter, you will need 1 x 13 mm clamp
and 1 x 15mm clamp, see these below.
|
|
|
|
|
Diesel Fuel Filter-MAHLE KL490/1D LONG VERSION 2010-2012 3.0L V6 Diesel (3-pin Moisture Sensor)Includes filter, & 4 o-ring seals.
Not for 2004-2009 models, which have a much smaller moisture sensor hole in the center.
THIS IS NOT A FILTER THAT WAS SUPPLIED AT THE ASSEMBLY PLANT. IT IS A LESS COSTLY OPTION FOR THOSE WANTING TO DO A CONVERSION.
If
you are planning on removing and replacing the original Clic style
fuel hose clamps on top of the filter, you will need one 13 mm clamp and
one 15mm clamp.
|
|
|
|
|
Diesel Fuel Filter-MAHLE KL490D SHORT VERSION 2010-2012 3.0L V6 Diesel (3-pin Moisture Sensor)Includes filter, and 4 O-ring seals.
This is the filter that was originally furnished at the Mercedes factory.
Not for 2004-2009 models, which have a much smaller moisture sensor hole in the center.
If
you are planning on removing and replacing the original Clic style
fuel hose clamps on top of the filter, you will need one 13 mm clamp and
one 15mm clamp.
|
|
|
|
|
Diesel Fuel Filter-MANN WK820/14 2010 & LATER +3.0L V6 Diesel (5 Pin Moisture Sensor)This fuel filter has an integrated, non-removable, 5-pin moisture sensor/fuel heater, which cannot be replaced with the earlier 3-pin version which were also used from 2010-2012 These are OEM Mann filters and are the identical fuel filter as those sold at a franchise Mercedes dealer.
If
you are planning on removing and replacing the original Mercedes Clic style
fuel hose clamps on top of the filter and replacing them with conventional fuel hose clamps, you will need one 13 mm clamp and
one 15mm clamp. (See below)
|
|
|
|
|
Diesel Purge 2002 & LATER
Label description:
Diesel Purge contains a mixture of agents with powerful cleaning properties. The special additives guarantee corrosion protection and increase ignition performance (Cetane number).
|
|
|
|
|
DPF Catalyst Cleaner
DPF/Catalyst Cleaner
- Dissolves and removes contamination in the diesel particulate filter and catalyst.
- Cleaning without dismantling
- Evaporates residue-free
- Dispense product directly onto DPF core using supplied straw through temperature sensor port on DPF.
|
|
|
|
|
Fuel Filter Bracket/Water Outlet Flange 2014-2016 2.1L 4 CYLThis unit holds the fuel filter on the 2.1L 4 CYL engines, although it is technically part of the cooling system.
This part has been updated several times by Mercedes, due to leakage problems. This is the newest version.
|
|
|
|
|
Fuel Filter O Ring 2002-2009 SprinterThis O ring is used on the fuel filter moisture sensor. One or two are required, depending upon the model year.
|
|
|
|
|
Fuel Filter Purge Hose (3 Pin Moisture Sensor) 3.0L V6 2010-2012
This hose connects to the moisture sensor.on top of fuel filter and is the only one furnished with a metal bracket.. Bleed screw is at the opposite end.
NOTE: This hose is used on those models which have the type of fuel filter with the removable 3-pin moisture sensor.
DO NOT ORDER THIS IF YOU HAVE A FUEL FILTER WITH THE NON-REMOVABLE 5-PIN MOISTURE SENSOR.
See the other version of this hose below
|
|
|
|
|
Fuel Filter Purge Hose (5 Pin Moisture Sensor) 3.0L V6 2010-2018
Hose to top of fuel filter. Snaps onto the small nipple at the top, on the side. This hose has a bleed screw on the end for purging accumulated water at the bottom of the fuel filter.
NOTE: This hose is only used in conjunction with the new BlueTec engine fuel filters with the non-removable 5-pin moisture sensor.
See the other version of this hose below
|
|
|
|
|
Fuel Filter Purge Hose 3.0L V6 2007-2009
This hose connects to the moisture sensor.on top of fuel filter. Bleed screw is at the opposite end.
DO NOT ORDER THIS HOSE IF YOU HAVE A 2010 OR LATER MODEL WITH A BLUETEC ENGINE.
THERE ARE TWO DIFFERENT FUEL FILTER PURGE HOSES FOR 2010 AND BOTH ARE SHOWN BELOW
|
|
|
|
|
Fuel Hose A 3.0 V6 2007-2009Hose uses 2 x 13 mm clamps
|
|
|
|
|
Fuel Hose A 3.0L V6 2010 & LATER
REQUIRES TWO 13MM CLAMPS.
Fuel filter to high pressure injection pump
|
|
|
|
|
Fuel Hose B 3.0 V6 2007-2009Hose from output side of fuel filter to high pressure injection pump
Hose uses 13mm clamps
|
|
|
|
|
Fuel Hose B 3.0L V6 2010 & LATER
Only for 3.0L V6 Diesel
REQUIRES TWO 13MM CLAMPS. |
|
|
|
|
Fuel Hose C 3.0L V6 2007-2009One of two hoses that connect the fuel pipe sections together
Hose use 15 mm clamps
|
|
|
|
|
Fuel Hose C 3.0L V6 2010 & LATER
Only for 3.0L V6 Diesel
Fuel filter to separator
REQUIRES TWO 15MM CLAMPS.
|
|
|
|
|
Fuel Hose D 3.0L V6 2010 & LATER
Only for 3.0L V6 Diesel BlueTec
REQUIRES TWO 15MM CLAMPS.
|
|
|
|
|
Fuel Hose D 3.0L V6 2007-2009Short, straight 50mm (2 inch) section
13mm clamp on each end
|
|
|
|
|
Fuel Hose E 3.0L V6 2007-2009Feed hose from metal pipe to input side of fuel filter
Hose uses 2 x 15 mm clamps
|
|
|
|
|
Fuel Hose F 3.0L V6 2007-2009Hose uses 2 x 15 mm clamps
|
|
|
|
|
Fuel Injection Hose Clamp 13 mm 2002 & LATERClamping Range 12.5-14 mm
These are special fuel hose clamps with rolled edges and no serrations so, the clamp will not cut into the hose
If you are replacing replacing the original "Clic" clamps on a ......
2002-2003 Sprinter-order 4 x 13mm clamps
2004-2006 Sprinter-order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter-order 6 x 13mm clamps & 6 x 15mm clamps
|
|
|
|
|
Fuel Injection Hose Clamp 15mm 2002 & LATERClamping Range 13.5-15.5 mm
These are special fuel hose clamps with rolled edges and no serrations so, the clamp will not cut into the hose
If you are replacing replacing the original "Clic" clamps on a ......
2002-2003 Sprinter-order 4 x 13mm clamps
2004-2006 Sprinter-order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter-order 6 x 13mm clamps & 6 x 15mm clamps
|
|
|
|
|
Fuel Injection Hose Clamp 17mm 2002 & LATERClamping Range 16-18 mm
These are special fuel hose clamps with rolled edges and no serrations so, the clamp will not cut into the hose
If you are replacing replacing the original "Clic" clamps on a ......
2002-2003 Sprinter-order 4 x 13mm clamps
2004-2006 Sprinter-order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter-order 6 x 13mm clamps & 6 x 15mm clamps
If replacing "Clic" clamps on a ......
2002-2003 Sprinter-order 4 x 13mm clamps
2004-2006 Sprinter-order 9 x 13mm clamps & 1 x 15mm clamp
2007-2009 Sprinter-order 6 x 13mm clamps & 6 x 15mm clamps
|
|
|
|
|
Fuel Line Seal Ring 2002-2003 & 2007-2009
O-ring used at both ends of the white plastic fuel lines on the OM612 5 CYL engine
Also used on 2007-2009 3.0 V6 on end of fuel purge hose where it enters the fuel filter.
Do not order these seal rings if you are ordering new hoses, as the hoses are furnished with the seals already in place.
|
|
|
|
|
Fuel Purge Hose Coupling/Screw 2007 & LATERThreads into the top of fuel filter moisture sensor for 2007 and later 3.0L V6 engines
Used for attaching the fuel purge hose to the moisture sensor.
|
|
|
|
|
Fuel Return Line Retainer Clip 2002 & LATERLocated at top of each injector
|
|
|
|
|
Fuel Tank Cap 2002-2018Seal included |
|
|
|
|
Fuel Tank Filler Coupler 2002-2006Connects the filler tube to the fuel tank.
|
|
|
|
|
Fuel Tank Filler Neck 2002-2006Approximately 500mm long (20 inches) |
|
|
|
|
Particulate Filter Protector 2007+
|
|
|
|
|
Super Diesel Additive 2002 & LATER
Label description:
With Cetane Plus for greater engine performance, less Diesel knocking, quieter running and easier starting. Cleans the engine and injection system and prevents injector needles from seizing or resinifying. Secures the optimum utilization an energy conserving combustion of fuels. Reduces corrosion and wear. The plus super-Diesel Fuels. Suitable for low-sulfur Diesel fuels. Tested for compatibility with turbochargers.
|
|
|
|
|
Type A Hose Clamp 38-50mmClamping Range 38-50mm
Rolled clamp edge and smooth inside band will not cut into the hose. High quality made in Sweden.
|
|
|
|
|
Type B Hose Clamp 44-56mmClamping Range 44-56mm
Rolled clamp edge and smooth inside band will not cut into the hose. High quality made in Sweden.
|
|
|
|
|
Type C Hose Clamp 50-65mmClamping Range 50-65mm
Rolled clamp edge and smooth inside band will not cut into the hose. High quality made in Sweden.
|
|
|
|
|
Type D Hose Clamp 32-44mmClamping Range 32-44mm
Rolled clamp edge and smooth inside band will not cut into the hose. High quality made in Sweden.
|
|
|
|
|
Water/Fuel Bleed Screw 2002-2018Located in side of fuel filter, at bottom of canister on 2002-2003 models.
Located on top of fuel filter moisture sensor for 2004-2006 models. (2007-2009 V6 diesels use a different coupling on top, see below)
Located on fuel hose and fuel filter for 2007 and later models
Used for bleeding any water and /or air from fuel filter and fuel system.
|
|
|
