Mercedes-Benz Genuine Diesel additive to prevent injector contamination.
• Keeps injectors free of residues and contamination and prevents them from sticking.
• Protects against injector wear.
• Lower fuel consumption and maximum engine performance.
Use Fill before refueling. Metering: contents are sufficient for 1 tankful or approx. 60l. Remove the screw cap; attach the screw-on spout. Pour the entire bottle contents into the tank filler neck.
Container type: 100 ml tin can with screw-on spout.
Application: Prevention of injector contamination on MB cars with diesel engines.
Removes deposits in the diesel injection system and in the combustion chamber. Increases the cetane number and improves the ignitability of the diesel fuel. Ensures the engine runs quietly. Protects against corrosion and wear. Optimizes the exhaust gas values and performance of the engine. Effect lasts up to 6000 miles.
For cleaning the entire intake system. Suitable only for use in diesel engines!
A high-tech mixture of cleaning agents for removing deposits and byproducts from the intake manifold and throttle body of diesel engines. Dissolves and removes deposits and contaminants such as oil, dirt, carbon residue, etc. Restores normal function of moving parts. Increases reliability in all diesel engines.
Diesel Purge contains a mixture of agents with powerful cleaning properties. The special additives guarantee corrosion protection and increase ignition performance (Cetane number).
Used for all diesel engines to prevent and eliminate problems associated with uneven idling and partial load knocking. Quantity to be used for preventive and remedial use: 500 ml.
Preventive Use: Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. Add to diesel fuel according to the inspection intervals.
Remedial use: Un-clip the fuel pipe and immerse the end in the Diesel Purge. Close the fuel return pipe or feed that into the Diesel Purge. Start the engine and allow the engine to run at different speeds with the Diesel Purge unmixed. After the cleaning process, assemble the vehicle's system. In extreme cases, repeat the cleaning procedure if necessary.
Add to your current or fresh engine oil. Helps to protect engine against wear and tear from all of the internal moving parts.
Cera Tec is a high-tech ceramic wear protection product for all motor oils. Cera Tec reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines.
Safely irradicates deposits and sludge from the entire lubrication system to keep your engine running cleaner and longer. To be used before performing an oil change.
Effect: Removes deposits, residues from all 4-stroke gasoline and diesel engines. Dissolves sludge, lacquer and isolates solid particles and liquid contaminants. Improves the combustion process and restores full engine performance. Prevents corrosion of unprotected metal surfaces. Recovers oil lubricating properties
Properties: Suitable for diesel particulate filters. Tested for turbochargers and catalytic converters. No pollution to the environment. Does not attack common sealing materials.
Reduces oil consumption via the piston rings and valve guides. Prevents blue, smoky exhaust fumes. Regenerates engine seals made of plastic and rubber. Prevents pollution of the environment due to oil dripping from the engine.
Cleans the entire cooling system and removes oily deposits caused by blown cylinder head gaskets or internally leaking oil coolers and protects against corrosion/rust.
Cleans thoroughly and prevents deposits from forming in fuel systems and combustion chambers. Keeps the injectors clean and guarantees improved engine combustion leading to a lower specific fuel consumption and the maximum engine performance.
Prevents seizing and the injector needles from gumming up. Increases the lubrication action of diesel fuels low in sulfur (low sulfur diesel in accordance with DIN EN 590) and protects distributor injector pumps from wear. Increases the Cetane number of diesel fuel, leading to a smooth and gentle combustion process. Contains antioxidant and prevents corrosion. Compatible with all modern diesel oxidation catalytic converters.
THIS PRODUCT MAY ONLY BE SHIPPED BY GROUND TRANSPORTATION (FEDEX GROUND OR UPS GROUND). NO MAIL, NOR AIR SHIPPING IS PERMITTED BY FEDERAL LAW.
Industrial Grade Carbon Remover - Great for cleaning EGR valves.
With the TUNAP XGel Cleaning Technology, carbon-based contamination on the EGR valves and in the intake and exhaust system can be quickly removed. The unique XGel technology dissolves carbon contamination extremely quickly. The outstanding surface adhesion and coating properties ensure a very short penetration time and excellent dirt removal.
Wurth White Lithium Grease - 10.6 oz Aerosol: Versatile Lubrication and Protection.
Provides an exceptional coating for lubrication between similar or dissimilar materials, preventing wear and reducing friction.
Applications: Cables, hinges, hood and trunk mechanisms, tools, trailer attachments, antennas, glides, rollers, slide mechanisms, buckles, shackles, gears, locks and many other moving parts and exposed surfaces.
.png)
