906 333 00 14
Control Arm Bushing-Front Position 2007 & LATER Forward position on control arm
2 Required per vehicle.
See the rearward position bushings shown below. You need two of these bushings as well.
906 333 01 14
Control Arm Bushing-Rear Postion 2007 & LATER Rear position on front control arm - 2 Required
906 323 35 85
Front Stabilizer Bar Bushing 20 MM BAR 2007 & LATER
20 mm / 2 per vehicle.
These are ONLY for the 20 MM bar and supersedes a discontinued bushing which was found to be inadequate.
Order two bushings and two brackets for proper conversion.
Dodge option code is SHJ, MB option code is C40.
906 323 37 85
Front Stabilizer Bar Bushing 24 MM BAR 2007 & LATER
24 mm / 2 per vehicle
These are ONLY for the HEAVY DUTY 24 MM bar
906 320 17 89
Left Front Stabilizer Bar End Link 2007 & LATER Driver side (Left) front
Has ball joint on each end of link.
906 330 40 07
Left Lower Control Arm 2007 & LATER
Left or Driver's Side
Manufactured by Lemfoerder, an OEM supplier to Mercedes.
Lower ball joint and both bushings are already pre-installed and is ready to mount to vehicle.
906 333 02 27
Lower Ball Joint 2007 & LATER
Sprinter 1500, 2500 & 3500 Models
Two are utilized per vehicle, one per lower control arm.
These are OEM European made parts.
Photo shows two units but, these are sold individually. Order two, if doing both sides .
906 398 19 01-HD
Rear Stabilizer Bar Kit 2500-HD BRACKET VERSION 2007 & LATER
This is a kit with parts of a far more heavy duty design. Mercedes has redesigned the brackets and bolts to be more robust and these are made by the OEM manufacturer. Kit includes four longer bolts, two standard bushings and two heavy duty mounting brackets.
One kit has all the parts for both sides of the rear stabilizer bar.
906 398 19 01-STD
Rear Stabilizer Bar Kit 2500-STANDARD BRACKET VERSION 2007 & LATER
Contains 2 mounting brackets, 2 standard bushings and 4 bolts.
This is the STANDARD kit.
An optional HEAVY DUTY BRACKET KIT is also available and is shown below.
906 326 22 81
Rear Stabilzer Bar Bushing-HEAVY DUTY-2500 2007 & LATER Replaces earlier bushing which has been discontinued.
FOR HEAVY DUTY LARGER DIAMETER BAR ONLY - 18MM DIAMETER BAR
906 326 21 81
Rear Stabilzer Bar Bushing-STANDARD-2500 2007 & LATER Replaces earlier bushing which has been discontinued.
FOR STANDARD DUTY BAR ONLY- 11MM DIAMETER BAR
See two versions of the complete kit shown below.
Both kits contain this same bushing. One kit has standard brackets and the other has heavy duty brackets.
907 320 41 01
Rear Sway Bar Link 2019+ 4WD
2 Required
Only for 4WD models, see RWD models below
907 320 36 00
Rear Sway Bar Link 2019+ RWD
2 Required
Only for RWD models, see 4WD models below
906 320 18 89
Right Front Stabilizer Bar End Link 2007 & LATER Passenger side (Right) front
Has ball joint on each end of link.
906 330 41 07
Right Lower Control Arm 2007 & LATER
Right or Passenger's Side
Manufactured by Lemfoerder, an OEM supplier to Mercedes.
Lower ball joint and both bushings are all pre-installed and is ready to mount to the vehicle.
Copyright © 1985-2023 Europarts. All Rights Reserved.