Deep Cleaning for Turbochargers, Intake Valves, Pistons & Combustion Chambers (400ml / 13.5 fl oz).
This professional-grade cleaner restores engine performance and offers an Advanced Combustion Chamber & Valve Cleaning Solution designed to penetrate deep into hard-to-reach engine areas, effectively dissolving and removing stubborn carbon deposits.
This product is tested for effectiveness and safety on all gasoline and diesel engines, ensuring deep cleaning without the need for disassembly.
Anti-Crystallizer & SCR System Cleaner for Diesel Vehicles with AdBlue®. Prevents Crystallization & Protects Your SCR System.
Key Benefits: Prevents & Removes Crystallization – Cleans and prevents harmful crystal deposits in DEF (AdBlue®) metering systems, injectors, and SCR catalytic converters. Extends SCR System Lifespan – Protects critical SCR components from blockages, clogs, and injector failures. Improves Vehicle Performance – Ensures optimal DEF flow and injection, maintaining proper emissions control. Works for Both Prevention & Cleaning – Can be used proactively to prevent buildup and reactively to dissolve existing crystals. Safe & Effective Formula – Non-hazardous, non-corrosive, and non-irritant, making it safe for all diesel vehicles with a DEF (AdBlue®) system.
Especially suited for vehicles used for city driving and
those that drive short distances. Add to diesel fuel immediately before
filling up.
Mixing Ratio: 250ml bottle treats up to 100 liters (26.42 U.S. gallons) of DEF (AdBlue®) fluid. Use 25ml per 10 liters (2.64 U.S. gallons) of DEF (AdBlue®). Do not overdose!
How to Use: Measure the required amount using the bottle’s dosing chamber. Mix directly with DEF (AdBlue®) solution before adding it to the vehicle’s DEF tank. Repeat this process with each DEF refill for continuous protection.
Removes deposits in the diesel injection system and in the combustion chamber. Increases the cetane number and improves the ignitability of the diesel fuel. Ensures the engine runs quietly. Protects against corrosion and wear. Optimizes the exhaust gas values and performance of the engine. Effect lasts up to 6000 miles.
For cleaning the entire intake system. Suitable only for use in diesel engines!
A high-tech mixture of cleaning agents for removing deposits and byproducts from the intake manifold and throttle body of diesel engines. Dissolves and removes deposits and contaminants such as oil, dirt, carbon residue, etc. Restores normal function of moving parts. Increases reliability in all diesel engines.
Protects the diesel particulate filter. Aids the regeneration of DPF
systems. Ensures optimal fuel combustion. Reduces the build-up of
particulates. Especially suited for vehicles used for city driving and
those that drive short distances. Add to diesel fuel immediately before
filling up.
Diesel Purge contains a mixture of agents with powerful cleaning properties. The special additives guarantee corrosion protection and increase ignition performance (Cetane number).
Used for all diesel engines to prevent and eliminate problems associated with uneven idling and partial load knocking. Quantity to be used for preventive and remedial use: 500 ml.
Preventive Use: Fill the fuel filter up with Diesel Purge when doing filter replacement, put the rest in tank. Add to diesel fuel according to the inspection intervals.
Remedial use: Un-clip the fuel pipe and immerse the end in the Diesel Purge. Close the fuel return pipe or feed that into the Diesel Purge. Start the engine and allow the engine to run at different speeds with the Diesel Purge unmixed. After the cleaning process, assemble the vehicle's system. In extreme cases, repeat the cleaning procedure if necessary.
This engine flush reliably removes deposits throughout the entire oil circuit, ensures improved lubrication, and reduces contamination of the fresh engine oil during oil changes. Ideal for optional use with every oil change – for maximum engine performance and longevity.
For all diesel engines.
Highlights: Effectively removes deposits throughout the entire oil circuit. Protects the fresh engine oil from rapid contamination. Improves lubrication performance and efficiency. Easy application before oil change 1 container (400 ml) per engine oil change.
Application Note: Before changing the oil, warm up the engine and add the entire contents of one container to the used engine oil through the oil filler cap. Then let the engine idle for a maximum of 20 minutes and immediately change the engine oil and oil filter according to the manufacturer's specifications. The minimum oil level must not be undershot during application. Suitable for diesel engines only.
Add to your current or fresh engine oil. Helps to protect engine against wear and tear from all of the internal moving parts.
Cera Tec is a high-tech ceramic wear protection product for all motor oils. Cera Tec reduces friction and wear due to ceramic compounds that withstand extremely high chemical and thermal loads. Prevents direct metal-to-metal contact, thus increasing the engine service life. The low-friction effect reduces fuel consumption in gasoline and diesel engines.
Safely irradicates deposits and sludge from the entire lubrication system to keep your engine running cleaner and longer. To be used before performing an oil change.
Effect: Removes deposits, residues from all 4-stroke gasoline and diesel engines. Dissolves sludge, lacquer and isolates solid particles and liquid contaminants. Improves the combustion process and restores full engine performance. Prevents corrosion of unprotected metal surfaces. Recovers oil lubricating properties
Properties: Suitable for diesel particulate filters. Tested for turbochargers and catalytic converters. No pollution to the environment. Does not attack common sealing materials.
Reduces oil consumption via the piston rings and valve guides. Prevents blue, smoky exhaust fumes. Regenerates engine seals made of plastic and rubber. Prevents pollution of the environment due to oil dripping from the engine.
Cleans the entire cooling system and removes oily deposits caused by blown cylinder head gaskets or internally leaking oil coolers and protects against corrosion/rust.
Contents (300 mL) is sufficient for 3–6 Liters (0.8 gal. to 1.6 gal.) motor oil.
MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life and less noise. Specifically designed for older engine designs with or without a turbocharger.
Safe for use with catalytic or converters and particulate filters.
Cleans thoroughly and prevents deposits from forming in fuel systems and combustion chambers. Keeps the injectors clean and guarantees improved engine combustion leading to a lower specific fuel consumption and the maximum engine performance.
Prevents seizing and the injector needles from gumming up. Increases the lubrication action of diesel fuels low in sulfur (low sulfur diesel in accordance with DIN EN 590) and protects distributor injector pumps from wear. Increases the Cetane number of diesel fuel, leading to a smooth and gentle combustion process. Contains antioxidant and prevents corrosion. Compatible with all modern diesel oxidation catalytic converters.
THIS PRODUCT MAY ONLY BE SHIPPED BY GROUND TRANSPORTATION (FEDEX GROUND OR UPS GROUND). NO MAIL, NOR AIR SHIPPING IS PERMITTED BY FEDERAL LAW.
Wurth White Lithium Grease - 10.6 oz Aerosol: Versatile Lubrication and Protection.
Provides an exceptional coating for lubrication between similar or dissimilar materials, preventing wear and reducing friction.
Applications: Cables, hinges, hood and trunk mechanisms, tools, trailer attachments, antennas, glides, rollers, slide mechanisms, buckles, shackles, gears, locks and many other moving parts and exposed surfaces.
