Fuel injectors, rails, tank pump, injection pump
642 990 29 07KIT
2007 & LATER 3.0L V6 Diesel SPRINTER Fuel Injector Bolt Kit Complete set of six stretch bolts and six lower injector seals.
Any time an injector is replaced, both the bolt and the seal must be replaced.
These two components should never be reused.
000 490 10 13
AdBlue DEF Injection Valve/Nozzle 2.1L 4 CYL Diesel 2014-2016 aka DEF dosing valve
Only for the 4 CYL engines
This OEM Bosch manufactured valve is the identical part sold at a Mercedes dealer
164 490 05 13
AdBlue DEF Injection Valve/Nozzle 3.0L V6 Diesel 2010-2018 aka DEF dosing valve
000 995 11 33
AdBlue DEF Injection Valve/Nozzle Clamp Clamp for Ad Blue Injection Nozzle.
906 470 05 53
AdBlue DEF Large Tank Heating Unit 2010-2014 Check carefully before ordering this unit, as there are two versions of the DEF heating assembly, which also includes the level sender. This unit is for the larger 25 Liter DEF tanks located UNDER THE VEHICLE, adjacent the exhaust system. Mercedes code MG5The black cylinder on this unit is approximately 6 1/2 inches long. If the cylinder is 8 1/2 inches long, order the other unit shown below. This is NOT for those vehicles with smaller 12 Liter AdBlue tank in the engine compartment.
906 470 03 53
AdBlue DEF Small Tank Heating Unit 2010-2014
The level sender is also part of this unit.
Only for the SMALLER 12 Liter AdBlue tank, located in the engine compartment (Code KP2)
The
black cylinder on this unit is approximately 8 1/2 inches long. If
the cylinder is 6 1/2 inches long, order the other unit shown below.
906 470 18 15
AdBlue DEF Tank Assembly 2014-2016
MB Part# 906 470 18 15 - Verify part number before ordering.
See other part below, MB Part# 906 470 17 00
This unit is a complete unit with the tank heating unit, for models 2014 to 2016.
This is the later version which must be replaced as a complete assembly, as it has a non-replaceable heating unit built in to the tank.
If you look at the top of the tank, you can determine whether you have the sealed tank (this one) or the version with removable heating unit.
906 470 17 00
AdBlue DEF Tank Assembly 2016-2018
MB Part# 906 470 17 00 - Verify part number before ordering.
See other unit below with different MB Part# 906 470 18 15
This unit is a complete unit with the tank heating unit, for models 2016 and later.
This is the later version which must be replaced as a complete assembly, as it has a non-replaceable heating unit built in to the tank.
642 070 12 87
Diesel Fuel Injector - New 3.0 V6 2010 & LATER
Original New Factory Injector - For BlueTec OM642.896, OM642.898 & OM642.899 V6 diesel engines 2010 & Later
Only for BluTec engines 2010 and later - Six Required, Sold Individually
DPF KIT
DPF Cleaning Kit 2007 & Later Complete kit with all necessary items for cleaning the DPF (Diesel Particulate Filter) Incudes: 1 x Pressurized Spray Gun (also available separately)
20110
DPF Filter Cleaner 2007 & Later Additional fluid for DPF cleaning. This product is not to be used in any manner, other than with the kit shown below.
20112
DPF Filter Purge 2007& Later Additional fluid for DPF flushing. This product is not to be used in any manner, other than with the kit shown below.
651 070 39 81
Fuel Feed Line Assembly 2014-2016 2.1L 4 CYL Fuel feed line from fuel filter to the high pressure injection pump. This is a 3-way hose, that i ncludes the fuel pressure sensor.
651 070 04 00
Fuel Hose 2014-2016 2.1L 4 CYL Fuel hose
642 070 04 81
Fuel Hose A 3.0 V6 2007-2009 Hose uses 2 x 13 mm clamps
651 070 17 81
Fuel Hose-HP Pump to Fuel line 2014-2016 2.1L 4 CYL Fuel hose from high pressure pump to fuel line
642 016 00 38
Fuel Injector Retainer 2007 & LATER 3.0L V6 All 2007 and later 3.0L V6 Diesel engines
651 070 55 32
Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016 (FEMALE CONNECTORS)
Links all of the four injectors and returns surplus fuel back to the fuel tank.
THERE ARE TWO DIFFERENT VERSIONS OF THIS HOSE.
This unit has 4 FEMALE connectors. If you have 4 MALE connectors, See Below.
BEFORE ORDERING, EXAMINE YOUR LINE CAREFULLY, AS SOME CUSTOMERS HAVE ORDERED THE INCORRECT UNIT.
651 070 24 32
Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016 (MALE CONNECTORS) Links all of the four injectors and returns surplus fuel back to the fuel tank. THERE ARE TWO DIFFERENT VERSIONS OF THIS HOSE.
This unit has 4 MALE connectors. If you have 4 FEMALE connectors, see below.
BEFORE ORDERING, EXAMINE YOUR LINE CAREFULLY, AS SOME CUSTOMERS HAVE ORDERED THE INCORRECT UNIT.
642 070 12 87 80
Fuel Injector-REMAN/EXCHANGE 3.0L V6 2010 & LATER
Original remanfactured/exchange factory Bosch injector
For BlueTec OM 642.896, OM642.898 & 642.899 V6 diesel engine
A CORE DEPOSIT OF $120 PER INJECTOR WILL BE ADDED TO YOUR INVOICE.
THIS DEPOSIT WILL BE REFUNDED UPON RETURN OF YOUR OLD REBUILDABLE INJECTOR.
All returned cores must be complete, undamaged and fully assembled or they will not be accepted for refund.
Only for BluTec engines 2010 and later
THESE ARE ALSO AVAILABLE NEW, SEE BELOW
006 153 78 28
Fuel Pressure Sensor 2010 & LATER
Oval shaped Plug, no flat edges- if you have a 2009 or 2010 check the plug connector first
Located on back end of the right side fuel rail
The 90 degree sensor on the left fuel rai l is not available as a separate component and is only available with the left fuel rail assembly.
642 070 10 00
Fuel Rail Supply Line 2010 & LATER 3.0L V6 aka Fuel Delivery Line
642 070 27 95
Left Fuel Distribution Rail 2010 & LATER 3.0L V6 Driver's side rail. Includes Fuel Control Valve on end of rail. The fuel control valve (642 070 02 46) with the 90 degree connection is only available with the fuel rail.
642 070 30 95
Right Fuel Distribution Rail 2010 & LATER 3.0L V6 Right side or Passenger's side
Copyright © 1985-2023 Europarts. All Rights Reserved.
