|
|
|
3500SHC Emblem-Front Door 2002-2006 ***NO LONGER AVAILABLE***
NO LONGER AVAILABLE, AS OF MAY 2019
Located on front doors
3500SHC name plate, self adhesive
|
|
|
|
|
Antenna Assembly 2002-2006 Complete assembly, mounting base, mast and wire harness.
|
|
|
|
|
Antenna Mast 2002-2006
Threads onto roof mounted base.
The complete assembly is also available, see below.
|
|
|
|
|
Battery Hold Down Clamp 2002-2006Battery hold down clamp.
|
|
|
|
|
Battery Tray 2002-2006Battery tray located in engine compartment.
|
|
|
|
|
Brake Pedal Pad 2002-2006Brake pedal covering |
|
|
|
|
Center Cap A-Alloy Wheel-Silver Mercedes Logo 2500 2002-2018Sold individually. Order four if doing all four wheels.
75 mm diameter, snaps into the center hole of the wheel. Replaces plain silver, or Dodge, Freightliner logo center caps on alloy wheels with cap with Mercedes Benz star. This cap is painted silver and will fit any of the Sprinter alloy wheels from 2002-2018. See other two cap versions with chrome star, shown below.
|
|
|
|
|
Center Cap B-Alloy Wheel-Silver w/Chrome Mercedes Logo 2500 2002-2018Sold individually. Order four if doing all four wheels.
75 mm diameter, snaps into the center hole of the wheel. Replaces plain silver,
or Dodge & Freightliner logo center caps on alloy wheels with cap
with Mercedes Benz star. This cap has a SILVER background with chrome star & rim, and will fit any of the
Sprinter alloy wheels from 2002-2018. See other cap versions shown below.
|
|
|
|
|
Center Cap C-Alloy Wheel-Black w/Chrome Mercedes Logo 2500 2002-2018Sold individually. Order four if doing all four wheels.
75 mm diameter, snaps into the center hole of the wheel. Replaces plain silver,
or Dodge & Freightliner logo center caps on alloy wheels with cap
with Mercedes Benz star. This cap has a BLACK background with chrome star & rim, and will fit any of the
Sprinter alloy wheels from 2002-2018. See other cap versions shown below.
|
|
|
|
|
Center Cap-Steel Wheel-Mercedes Logo 2500 2002-2006
Only for steel wheels. Replaces cap with the Dodge ram emblem or the Freightliner center cap.
This silver Mercedes cap is smaller in size and covers only the center portion of the steel wheel nestled between the lug bolts.
It fits both the 15" and 16" steel wheels.
Sold in increments of one, four are required.
|
|
|
|
|
Front Bumper Cover Bracket 2002-2006One located on either side of front bumper cover
|
|
|
|
|
Fuel Tank Door Bumper 2002-2006Two required for the fuel tank door.
|
|
|
|
|
Fuel Tank Door Bumper 2007-2018Two required for Fuel Tank Door.
|
|
|
|
|
Fuel Tank Door/Flap 2002-2006This part is furnished only in black primer and must be painted to match your exterior color.
Includes both the hinge and the hinge spring, both of which are not available as separate items.
|
|
|
|
|
Glove Box Latch Assembly 2002-2006Secures glove box door to dashboard.
|
|
|
|
|
Grille Emblem - 316 CDI 2002-2006***NO LONGER AVAILABLE***DISCONTINUED BY MERCEDES IN MAY 2016
Only for Mercedes Grille conversion, see below
For 2500 model.....316CDI=2500
SEE 416CDI EMBLEM BELOW, WHICH IS STILL AVAILABLE, FOR THE PRESENT TIME.
|
|
|
|
|
Grille Emblem- 416 CDI 2002-2006Only for Mercedes Grille conversion, see below
For 3500 model......... 416CDI=3500
The 316CDI emblem below for 2500 models, is no longer available
|
|
|
|
|
Headlight Trim Panel-LEFT SIDE 2002-2006DRIVER SIDE metal trim piece underneath headlight.
This metal molding is furnished in black primer and is intended to be painted to match the body color of your van.
Fits DODGE models only.
Freightliner models use a different trim, which is L-shaped. |
|
|
|
|
Headlight Trim Panel-RIGHT SIDE 2002-2006
PASSENGER SIDE metal trim piece underneath headlight.
This metal molding is furnished in black primer and is intended to be painted to match the body color of your van.
Fits DODGE models only.
Freightliner models use a different trim, which is L-shaped.
|
|
|
|
|
Hood Emblem-SPRINTER & METRIS 2002-2018
Hood emblem on all vans from 2002 and later.
These are self-adhesive units.
Can be used to replace front ram or Freightliner emblem on those models.
|
|
|
|
|
Hood Insulation Pad Mounting Plug-SPRINTER 2002-2006
12 retainer plugs are required to mount pad to underside of the hood.
These are sold individually so, please order the appropriate quantity that you need.
See insulation pad below.
|
|
|
|
|
Hood Insulation Pad-SPRINTER 2002-2006Attaches to the underside of the hood with 11 mounting plugs, see these below.
|
|
|
|
|
Hood Release Cable 2002-2006Includes handle, found under dash on left
|
|
|
|
|
Hood Support Kit 2002-2006Thia kit includes the hood support, the spring and end retainer clip.
|
|
|
|
|
Hub Cap 3500-Mercedes 2002-2006Only for the 3500 model
Front axle ONLY
|
|
|
|
|
Interior Body Panel Retainer/Plug 2002-2006Found inside cargo vans, securing the interior panels to the walls and rear doors.
Color is pale grey.
|
|
|
|
|
Left Front Splash Guard / Mud Flap 2500 16" WHEELS 2002-2006 ***NO LONGER AVAILABLE***
NO LONGER AVAILABLE-DISCONTINUED BY MERCEDES
Left or Driver's Side
Item is at the left side of photo
Fits all 2500 models ONLY WITH 16" WHEELS
Not for any model with 15 inch wheels as they are too long |
|
|
|
|
Left Rear Splash Guard / Mud Flap 2500 16" WHEELS 2002-2006Shown at left side of photo
Fits 2500 models and only those with 16" wheels
Not for any model with 15 inch wheels, as they are too long
|
|
|
|
|
Left Seatback Release Lever 2002-2006
Only for left or driver's side seat.
This handle was previously made of a red colored plastic and has been replaced with a new part made of black plastic.
|
|
|
|
|
Left Speaker Grille/Cover 2002-2006Only for left or driver's side of vehicle
|
|
|
|
|
Rear Cargo Door Grab Handle Kit 2002-2018All parts required to install a vertical grab handle inside the rear cargo door area of your Sprinter I and Sprinter II.
One kit contains parts for one side: One handle and two mounting screws. The two threaded inserts are not included with the kit
and are in the photo strictly for illustration purposes.
The mounting holes for these handles are 420 mm (approx. 16.5 inches) from center to center.
The mounting hole spacing on these and those for the 2019 and later models (shown below) are the same so, the two are interchangeable with each other. This type has a 90 degree bend at the base and the later version are straight, at the base.
IF YOU HAVE A CARGO VAN, NOTHING ELSE IS WILL BE REQUIRED TO INSTALL THIS KIT.
IF YOU HAVE A PASSENGER VAN, YOU MAY OR MAY NOT HAVE THE THREADED INSERTS REQUIRED TO ACCEPT THE TWO MOUNTING SCREWS. IT WOULD BE BEST TO EXAMINE THE VEHICLE AND ORDER TWO THREADED INSERTS PER KIT, SHOWN BELOW, IF REQUIRED.
Order two kits, if you wish to do both sides of the vehicle, as these are interchangeable.
|
|
|
|
|
Rear Wheel Lock Washer-3500 2002-2006Tapered lock washer for rear wheel studs on 3500 models ONLY
See stud ring below, also used on this vehicle.
|
|
|
|
|
Right Front Splash Guard / Mud Flap 2500 16" WHEELS 2002-2006Right or Passenger's Side
Item is at the right side of photo
Fits all 2500 models ONLY WITH 16" WHEELS
Not for any model with 15 inch wheels as they are too long |
|
|
|
|
Right Front/Rear Splash Guard / Mud Flap 2500 & 3500 15" WHEELS 2002-2006Right or Passenger's Side
Item is at the right side of photo
Fits all 2500 FRONT AND REAR, ONLY WITH 15" WHEELS
Fits all 3500 FRONT, ONLY WITH 15" WHEELS |
|
|
|
|
Right Rear Splash Guard / Mud Flap 2500 16" WHEELS 2002-2006
Shown at right side of photo
Fits 2500 models only with 16 inch wheels
Not for any model with 15 inch wheels as they are too long
|
|
|
|
|
Right Seatback Release Lever 2002-2006
Only for right or passenger's side seat.
This handle was previously made of a red colored plastic and has now been superseded by a new part made of black plastic.
|
|
|
|
|
Right Speaker Grille/Cover 2002-2006Only for right or passenger's side of vehicle
|
|
|
|
|
Sprinter Emblem-Rear Door 2002-2018Located on rear door
Sprinter name plate, self adhesive
|
|
|
|
|
Sprinter Grille Conversion Kit-Mercedes Benz 2002-2006
Consist of two components:
Mercedes Star Grille Screen and metal grill molding.
During installation, you must remove the upper chrome bar on the Dodge hood, in order to install the Mercedes Benz grill, as there is a semi-circular shaped cutout in the hood, located behind the chrome bar. This cut-out surrounds the upper portion of the star on the Mercedes grille.
All parts included in this kit are original Mercedes Benz parts.
|
|
|
|
|
Sprinter Hood Vent Grille 2002-2006Mercedes louvered vent for hood/cowl area.
|
|
|
