Metris oil change kit contains: Mann or Perflux OEM oil filter kit x 1 (Both of these filter mfrs are OEM suppliers to Mercedes)
Oil drain plug seal washer x 1
Fuchs OEM engine oil x 8 liters (MB Spec 229.5 as required)
Engine oil capacity is 7.75 Liters, so you will have approximately 1/4 Liter left over
You will need a 27mm socket in order to remove the oil filter housing cap, which is
under the air filter housing on the right (passenger's) side of the engine.
Here is a link to a You Tube clip on doing your own Metris oil change: https://www.youtube.com/watch?v=OI5AelzXWzU
This transmission filter is only for the four cylinder engine models, both Sprinter and Metris, which have different transmissions than any other model.
This is the German OEM filter element only and includes no other parts. See other options listed below.
This kit is only for the 7 speed transmission found in the four cylinder Metris Kit contains:
1 x Transmission filter
1 x Transmission pan gasket
1 x Transmission pan drain plug seal ring
6 x Torx head aluminum bolts
The red lock pin shown in the photo is not included, as there is no dipstick tube on the Metris A/T
1 liter container MB Spec 236.15 on the label
ATF 7134FE Fluid capacity is 9.7 Liters for the 722.9 A/T
This is the BLUE fluid specified by Mercedes for use in your Sprinter 722.9 7 speed A/T.
It is not to be used in any earlier transmission which uses MB Spec 236.14 RED fluid.
A) Dot 4 Boiling pt. 230 Deg C
Wet Boiling pt. 155 Deg C B) Super Dot 4 Boiling pt. 265 Deg C Wet Boiling
pt. 165 Deg C C) Dot 4+ Typ 200 Boiling pt. 280 Deg C Wet Boiling pt. 198 Deg C (This is what we are selling)
This translates into Boiling pt. 536 Deg F and Wet Boiling pt 388 Deg F
SHIPPED BY FEDEX OR UPS GROUND SERVICE ONLY, NO AIR SHIPMENTS, NO MAIL SHIPMENTS
