Only for 2002-2003 models with OM612 engine - Moisture sensor mounts on filter at bottom
Not for 2004 or any later model year (photo above is generic and does not show the correct boxed filters that you will receive however, the filter brand is the same)
Two O-ring seals are included with the filter, which are to be used on the moisture sensor in the center of the filter element.
These are for 2004 to 2009 model years only - Not for 2002-2003 or any Sprinter engines 2010 and later.
If you are planning on removing and replacing the original "Clic" style fuel hose clamps on top of the filter, you will need 1 x 13 mm clamp and 1 x 15mm clamp, see below.
Located in side of fuel filter, at bottom of canister on 2002-2003 models.
Located on top of fuel filter moisture sensor for 2004-2006 models. (2007-2009 V6 diesels use a different coupling on top, see below)
Located on fuel hose and fuel filter for 2007 and later models
Used for bleeding any water and /or air from fuel filter and fuel system.