Only for 2002-2003 models with OM612 engine - Moisture sensor mounts on filter at bottom.
Not for 2004 or any later model year (photo above is generic and does not show the correct boxed filters that you will receive however, the filter brand is the same).
Two O-ring seals are included with the filter, which are to be used on the moisture sensor in the center of the filter element.
These are for 2004 to 2009 model years only - Not for 2002-2003 or any Sprinter engines 2010 and later.
If you are planning on removing and replacing the original "Clic" style fuel hose clamps on top of the filter, you will need 1 x 13 mm clamp and 1 x 15mm clamp, see below.
Two O-ring seals are included with the filter, which are to be used on the moisture sensor in the center of the filter element.
These are for 2004 to 2009 model years only - Not for 2002-2003 or any Sprinter engines 2010 and later.
If you are planning on removing and replacing the original "Clic" style fuel hose clamps on top of the filter, you will need 1 x 13 mm clamp and 1 x 15mm clamp, see below.
Mahle is the OEM Supplier to Mercedes for this part.
Two O-ring seals are included with the filter, which are to be used on the moisture sensor in the center of the filter element.
These are for 2004 to 2009 model years only - Not for 2002-2003 or any Sprinter engines 2010 and later.
If you are planning on removing and replacing the original "Clic" style fuel hose clamps on top of the filter, you will need 1 x 13 mm clamp and 1 x 15mm clamp, see below.
