|
|
|
2007+ Sprinter Control Arm Bushing Kit ***FREE SHIPPING***All four control arm bushings necessary, with 2 to 3 day shipping included.
2-3 Day shipping to most US Zip Codes included!
These kits are only for shipping to a US address.
|
|
|
|
|
2007-2018 Front Stabilzer End Link KitThis kit includes both front stabilizer bar end links and 2 to 3 day USPS Priority Mail shipping included, to any USA zip code address.
DO NOT ORDER THIS KIT IF SHIPPING TO AN ADDRESS OUTSIDE THE US.
This will fit all models 2007 and later, except those with 4WD, which began in 2015.
|
|
|
|
|
2007-2019 Sprinter Ball Joint Kit ***FREE SHIPPING***Both lower ball joints with shipping included
2 to 3 Day shipping to most US Zip Codes included!
These kits are only for shipping to a US address.
|
|
|
|
|
Camber Adjustment Bolt 2007+Eccentirc bolt for camber adjustment.
Only for NCV3 Sprinters, 2007 and later.
Two required, sold individually.
The 2007 and later Sprinter II models are somewhat prone to alignment issues.
It is recommended that these bolts should be changed out, if you are doing a front end alignment.
|
|
|
|
|
Control Arm Bushing-Front Position 2007+Forward position on control arm
2 required per vehicle
See the rearward position bushings shown below. You need two of these bushings, as well.
|
|
|
|
|
Control Arm Bushing-Rear Postion 2007+Rear position on front control arm
2 required |
|
|
|
|
Front Stabilizer Bar Bracket 2500 & 3500 2007+2 required
For both 2500 and 3500 models, including 4WD models
Must be changed to accommodate new design bushing, shown below
|
|
|
|
|
Front Stabilizer Bar Bushing 16 MM BAR 2007+There are three different sizes for these bushings. Check yours carefully, before ordering.
2 per vehicle
Only for 16 MM bar
Supersedes discontinued bushing
Order two bushings and two brackets for proper conversion
Dodge option code is SHJ, MB option code is C40 |
|
|
|
|
Front Stabilizer Bar Bushing 20 MM BAR Bushing 2007-2019There are three different sizes for these bushings. Check yours carefully, before ordering.
2 per vehicle
Only for 20 mm bar
Supersedes the original (now discontinued) bushing, which was found to be inadequate.
Order two bushings and two brackets for proper conversion, see brackets below.
Dodge option code is SHA, MB option code C45 |
|
|
|
|
Front Stabilizer Bar Bushing 24 MM BAR 2007+There are three different sizes for these bushings. Check yours carefully, before ordering.
2 per vehicle
Only for HEAVY DUTY 24 MM bar
|
|
|
|
|
Left Front Stabilizer Bar End Link 2007-2018Driver side (left) front
Has ball joint on each end of link |
|
|
|
|
Left Front Stabilizer Bar End Link 4WD ONLY 2015+Driver's side (left) front
Has ball joint on each end of link |
|
|
|
|
Left Lower Control Arm 2007+Left or driver's side
Lower ball joint and both bushings are already all pre-installed and is ready to mount to vehicle.
|
|
|
|
|
Load Sensing Link/ Lever 2002+Link for load sensor/valve on rear suspension |
|
|
|
|
Lower Ball Joint 2007+
Sprinter 2500 & 3500 Models
Two are utilized per vehicle, one per lower control arm.
Photo shows two units but, these are sold individually. Order two, if doing both sides. |
|
|
|
|
Rear Stabilizer Bar Bracket-2500 2007-2019Replaces earlier part which was discontinued.
|
|
|
|
|
Rear Stabilizer Bar Bushing 2500 2007+ *** NO LONGER AVAILABLE***Only for 2500 models
DISCONTINUED AND REPLACED BY NEW & MORE DURABLE KIT...SEE BELOW
|
|
|
|
|
Rear Stabilizer Bar Bushing 3500-33MM BAR 2007-2018Only for 3500 models with 33mm diameter rear stabilizer bar.
DO NOT ORDER THESE BUSHINGS UNLESS YOUR VEHICLE HAS BEEN CONVERTED TO THE NEW DESIGN REAR BUSHING KIT. SEE THE KIT BELOW.
If vehicle has not been converted, kit below will do both sides of your 3500.
|
|
|
|
|
Rear Stabilizer Bar End Link Bushing-L/R 3500 2007-2018Fits either left or right
Only for 3500 model rear suspension
Two required
|
|
|
|
|
Rear Stabilizer Bar End Link-L/R 2500 2007-2018Fits either left or right
Only for 2500 model rear suspension |
|
|
|
|
Rear Stabilizer Bar End Link-L/R 3500 2007-2018Fits either left or right
Only for 3500 model rear suspension
Two required
|
|
|
|
|
Rear Stabilizer Bar HEAVY DUTY Modification Kit 2500 2007-2019
This is a kit with parts of a more robust design and is an original Mercedes Benz modification.
One kit has all the parts for both sides of the rear stabilizer bar. The photo only shows one side however, you will receive both sides. In other words, order only one kit per vehicle.
|
|
|
|
|
Rear Stabilizer Bar Kit 2500 2007-2019
Contains 2 mounting brackets, 2 bushings and 4 bolts.
This is a STANDARD DUTY KIT. A HEAVY DUTY KIT is also shown below.
|
|
|
|
|
Rear Stabilizer Bar Modification Kit-3500 2007+Kit contains two mounting brackets, two of the new upgraded heavy duty bushings and four mounting bolts. The original rear brackets and mounts which were fitted to the vehicle have been discontinued by Mercedes, as they were found to be too weak. This is an original Mercedes Benz modification
The photo only shows one side however, you will receive both sides. In other words, order one kit per vehicle.
|
|
|
|
|
Rear Stabilizer Bracket Bolt 2007-2019
|
|
|
|
|
Rear Stabilzer Bar Bushing-2500 2007+Replaces earlier bushing which has been discontinued.
See complete kit shown below.
|
|
|
|
|
Rear Wheel Bearing 2500 2007+One bearing per side. Fits 2500 models.
|
|
|
|
|
Right Front Stabilizer Bar End Link 2007-2018Passenger side (right) front
Has ball joint on each end of link |
|
|
|
|
Right Front Stabilizer Bar End Link 4WD ONLY 2015+Passenger side (right) front
Has ball joint on each end of link |
|
|
|
|
Right Lower Control Arm 2007+Right or passenger's side
Lower ball joint and both bushings are all pre-installed and is ready to mount to the vehicle.
|
|
|
|
|
Stabilizer Bar End Link Bushing-Rear L or R 2500 2002+Fits either left or right
For Lower Yoke End of Rear Sway Bar End Link, 2 are required and are sold individually.
These are used on 2002-2006 2500 & 3500 models and 2500 models ONLY from 2007 and later.
See 2007+ 3500 bushings shown below
|
|
|
