Fuel injectors, rails, tank pump, injection pump
2007 & LATER 3.0L V6 Diesel SPRINTER Fuel Injector Bolt Kit Complete set of six stretch bolts and six lower injector seals.
Any time an injector is replaced, both the bolt and the seal must be replaced.
These should never be reused.
AdBlue DEF Injection Valve/Nozzle 2.1L 4 CYL Diesel 2014-2016 aka DEF dosing valve
Only for the 4 CYL engines
This OEM Bosch manufactured valve is the identical part sold at a Mercedes dealer
AdBlue DEF Injection Valve/Nozzle 3.0L V6 Diesel 2010-2019 aka DEF dosing valve
This OEM Bosch manufactured valve is the identical part as those sold at a Mercedes dealer
AdBlue DEF Injection Valve/Nozzle Clamp Clamp for Ad Blue Nozzle.
AdBlue DEF Large Tank Heating Unit 2010-2014 Check carefully before ordering this unit, as there are two versions of the DEF heating assembly.
This unit is for the larger 25 Liter DEF tanks located UNDER THE VEHICLE, adjacent the exhaust system. Mercedes code MG5
The black cylinder on this unit is approximately 6 1/2 inches long. If the cylinder is 8 1/2 inches long, order the other unit shown below.
This is NOT for those vehicles with smaller 12 Liter AdBlue tank in the engine compartment.
AdBlue DEF Small Tank Heating Unit 2010-2014 Only for the SMALLER 12 Liter AdBlue tank, located in the engine compartment (Code KP2)
black cylinder on this unit is approximately 8 1/2 inches long. If
the cylinder is 6 1/2 inches long, order the other unit shown below.
AdBlue DEF Tank Assembly 2014-2018
This unit is a complete unit with the tank heating unit, for models 2014 and later.
This is the later version which must be replaced as a complete assembly,
as it has a non-replaceable heating unit built in to the tank.
If you look at the top of the tank, you can determine whether you have the sealed tank (this one) or the version with removable heating unit.
DPF Cleaning Kit 2007-2018 Complete kit with all necessary items for cleaning the DPF (Diesel Particulate Filter)
1 x Pressurized Spray Gun
1 x Wand and five spray nozzle attachments
1 x DPF Cleaning Fluid (also available separately)
1 x DPF Cleaning Flush (also available separately)
Fuel Feed Line Assembly 2014-2016 2.1L 4 CYL Fuel feed line from fuel filter to the high pressure injection pump.
This is a 3-way hose, that includes the fuel pressure sensor.
Fuel Hose 2014-2016 2.1L 4 CYL Fuel hose
Fuel Hose A 3.0 V6 2007-2009 Hose uses 13 mm clamps
Fuel Hose-HP Pump to Fuel line 2014-2016 2.1L 4 CYL Fuel hose from high pressure pump to fuel line
Fuel Injector Retainer 2007 & LATER 3.0L V6 All 2007 and later 3.0L V6 Diesel engines
Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016 (FEMALE CONNECTORS) Links all of the four injectors and returns surplus fuel back to the fuel tank.
This unit has FEMALE connectors. If you have MALE connectors, see below.
Fuel Injector Return Line Assembly 2.1L 4 Cyl 2014-2016 (MALE CONNECTORS) Links all of the four injectors and returns surplus fuel back to the fuel tank.
THERE ARE TWO DIFFERENT VERSIONS OF THIS HOSE.
This unit has MALE connectors.
If you have female connectors, see below.
Fuel Injector-New 3.0L V6 2010 & LATER Original new factory Bosch injector
For BlueTec OM642.896, OM642.898 & OM642.899 V6 diesel engines 2010 & Later
Only for BluTec engines 2010 and later
Six required, sold individually
THESE ARE ALSO AVAILABLE REMANUFACTURED/EXCHANGE , SEE BELOW
Fuel Injector-Remanufactured/Exchange 3.0L V6 2010 & LATER Original remanfactured/exchange factory Bosch injector
For BlueTec OM 642.896, OM642.898 & 642.899 V6 diesel engine
A CORE DEPOSIT OF $120 PER INJECTOR WILL BE ADDED TO YOUR INVOICE.
THIS DEPOSIT WILL BE REFUND UPON RETURN OF YOUR REBUILDABLE INJECTOR.
Only for BluTec engines 2010 and later
THESE ARE ALSO AVAILABLE NEW, SEE BELOW
Fuel Pressure Sensor 2010 & LATER Located on back end of the
right side fuel rail
Straight connector plug.
The 90 degree sensor on the left fuel rail is not available as a separate component and is only available with the left fuel rail assembly.
Fuel Rail Supply Line 2010 & LATER 3.0L V6 aka Fuel Delivery Line
Steel line from the high pressure injection pump to the fuel rail.
This line will often leak at either end, especially if it has been over-torqued.
Left Fuel Distribution Rail 2010 & LATER 3.0L V6 Driver's side rail. Includes Fuel Control Valve on end of rail.
The fuel control valve (642 070 02 46) with the 90 degree connection is only available with the fuel rail.
Right Fuel Distribution Rail 2010 & LATER 3.0L V6 Right side or Passenger's side