|
|
|
|
906 598 00 82
2007-2009 3.0L V6 Charge Air Hose Kit ***FREE USA SHIPPING***
Includes the two charge air hoses used on both sides of the intercooler. The hose from the turbo to the intercooler and the hose from the intercooler to the engine.
|
|
|
|
|
642 091 01 50
Ball Socket 3.0L V6 Diesel 2007 & LATERBall socket insert for linkage to intake manifold inlet (swirl) actuator.
|
|
|
|
|
642 050 09 16 KIT
BASIC Timing Chain Kit-SPRINTER 3.0L V6 Diesel 2007-MID 2014
This 6-piece kit contains the timing chain and the four timing chain guides and the oil pump chain guide. All chain guides made in Germany by Febi-Bilstein and Iwis, the OEM suppliers to Mercedes. The original OEM Iwis, DOUBLE ROW, continuous timing chain is part of this kit.
The chain tensioner is not included but, it is available separately and also as part of the complete 7-piece kit, see below.
The oil pump drive chain is also not included but, it is also shown below.
|
|
|
|
|
651 905 01 00
Camshaft Position Sensor 2014-2016 2.1L 4 CylOnly for OM651 4 Cyl engine
|
|
|
|
|
651 052 00 00
Camshaft Timing Sprocket 2014-2016 2.1L 4 CYLTwo are required for each engine. One on the end of each camshaft.
|
|
|
|
|
651 090 40 00
Charge Air Elbow 2014-2016 4 CYLHard black plastic elbow, bolts to the intake manifold. Includes MAP sensor and two seal rings. Large oval shaped seal ring is not included.
|
|
|
|
|
906 528 26 82-AFT
Charge Air Hose - Intercooler to Engine 3.0L V6 Diesel 2010 & LATER
Located on the Passenger's side of the engine - This is the shorter of the two charge-air hoses. Seal rings are provided with hose.
This hose will fit all NCV3 model years and early VS30 models. IF you are ordering for a 2019 & Later models, carefully check the current intercooler and intercooler hose that you have to order the correct hose. This hose fits the passenger side for 2019 & Later models with the 907 501 17 00 Intercooler, which can be found here.
If you still do not know which hose you need, email us your VIN number for verification.
|
|
|
|
|
906 528 25 82-AFT
Charge Air Hose - Turbocharger to Intercooler 3.0L V6 Diesel 2010 & LATER
This hose is located on Driver's side.
Fits both the 2007-2018 NCV3 and the 2019-2022 V6 with the OM642 engine configuration.
This hose is also available as a Kit of two, for both sides, see below. Free USA shipping on the two hose kit. |
|
|
|
|
906 528 50 82-AFT
Charge Air Hose TYPE A-Turbocharger to Intercooler 2.1L 4Cyl 2014-2016
This is an AFTERMARKET HOSE. We also offer the Genuine Mercedes part here. Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the longer version of the two different hoses.
THIS HOSE IS ONLY FOR THOSE MODELS WITH STANDARD AIR CONDITIONING, WHICH HAS A SINGLE COMPRESSOR.
THE OTHER VERSION FOR DUAL A/C COMPRESSORS (ROOF MOUNTED A/C), IS SHOWN BELOW |
|
|
|
|
906 528 51 82
Charge Air Hose TYPE B-Turbocharger to Intercooler 2.1L 4 Cyl 2014-2016Orange/Red color hose, located on right side of vehicle, before the intercooler.
There are two versions of this hose, depending upon the type of air conditioning your vehicle is equipped with.
This is the shorter version of the two different hoses.
THIS HOSE IS ONLY FOR THOSE MODELS WITH SECONDARY AIR CONDITIONING (ROOF MOUNTED CABIN A/C).
IF YOU HAVE TWO SEPARATE A/C COMPRESSORS, THIS IS THE CORRECT HOSE. THE OTHER VERSION, WHICH IS SLIGHTLY LONGER, IS SHOWN BELOW.
|
|
|
|
|
906 528 37 82
Charge Air Hose-Intercooler to Engine 2.1L 4Cyl 2014-2016Located after the intercooler, on left side of vehicle
|
|
|
|
|
906 528 03 82
Charge Air Hose-Intercooler to Engine 3.0L V6 Diesel 2007-2009
This hose is the shorter of the two charge air hoses and runs from the intercooler to the engine. Seal ring and hose clamp are provided with hose.
Located on passenger side of engine.
Manufactured by Rein Automotive, a division of Continental (CRP)
See the other related hose for the opposite side of the intercooler, shown below.
Not for BlueTec engines 2010 and later
|
|
|
|
|
906 528 22 82
Charge Air Hose-Turbocharger to Intercooler 3.0L V6 Diesel 2007-2009
This hose is the longer one of the two charge air hoses. Seal ring and hose clamp are provided with this hose.
Located on driver's side of engine.
See the other related hose for the opposite side of the intercooler, shown below.
This is the newer and longer, upgraded hose, which supersedes 68013652AA
These hoses are also available as a set of two, for both sides, with Free USA Shipping. |
|
|
|
|
642 090 59 37
Charge Air Intake Pipe 3.0L V6 2007 & LATERCharge air intake line, upper end of this pipe joins the output side of the turbo resonator.
|
|
|
|
|
642 098 10 39
Charge Air Line Bracket #1-3.0L V6 Diesel 2007 & LATERFlat metal bracket with two holes.
|
|
|
|
|
642 098 04 39
Charge Air Line Bracket #3 3.0L V6 Diesel 2007 & LATERBracket from turbo resonator to the aluminum charge air pipe.
This is the large, U-shaped steel bracket with a single bolt hole.
|
|
|
|
|
642 096 15 45
Charge Air Line Bracket #4 3.0L V6 Diesel 2007 & LATERBracket at aluminum charge air pipe.
There are numerous brackets on the 3.0L V6 engine and they possibly may have changed after 2010.
It is suggested you get the part number off your existing bracket or carefully compare to the picture before ordering. The part number for this is 642 096 15 45 |
|
|
|
|
642 016 03 38
Charge Air Line Bracket #5 3.0L V6 Diesel 2007 & LATERThere are numerous brackets and possibly changed after 2010.
It's suggested you get a part# off the old bracket or carefully compare to the picture before ordering.
The part # for this is 642 016 03 38 |
|
|
|
|
651 090 38 42
Charge Air Pipe 2014-2016 4 CYLHard black plastic pipe, located immediately before the throttle body and after the intercooler charge-air output hose (black hose)
|
|
|
|
|
651 050 00 16 KIT
COMPLETE Timing Chain Kit-SPRINTER 2.1L 4 CYL Diesel 2014-2016This 6-piece kit contains the timing chain, the chain tensioner, left and right chain guide rails and the two camshaft sprockets. All parts made in Germany by Febi-Bilstein, the OEM supplier to Mercedes.
|
|
|
|
|
906 490 06 00
Diesel Particulate Filter (DPF) 3.0L V6 Diesel 2010-2021
*** Currently Unavailable ***
Only for BlueTec engines, 2010 and later.
This unit is a combined device, consisting of Diesel oxidation catalyst up front and and a DPF in the rear of the housing.
This is a Brand New original Mercedes DPF, but it is sold as remanufactured/exchange. Your old unit must be returned for the core deposit refund.
|
|
|
|
|
906 490 05 83
Diesel Particulate Filter (DPF) 2.1L 4 CYL 2014-2016
*** Currently Unavailable ***
Only for OM651 2.1L 4 CYL engines
See the input and output clamps and the seal ring shown below.
|
|
|
|
|
906 490 00 42
DPF Band Clamp 3.0L V6 2010 & LATERInterfaces with the DPF bracket, shown below
|
|
|
|
|
906 492 69 41
DPF Bracket 3.0L V6 2010 & LATER
This is the 3.0L V6 DPF bracket which is subject to cracking.
The old part number has been superseded by this new revised part, which is more robust.
This bracket interfaces with the DPF band clamp, shown below.
|
|
|
|
|
651 140 22 08
EGR Pipe 2014-2016 2.1L 4 CYL
Adjacent to EGR Valve and Pressure Converter (Transducer)
|
|
|
|
|
642 140 21 08
EGR Pipe-LONG 3.0L V6 2010 & LATER
Stainless steel EGR pipe
|
|
|
|
|
642 140 14 08
EGR Pipe-LONG 3.0L V6 2007-2009EGR recirculation pipe, stainless steel.
This is the longer of the two pipes.
|
|
|
|
|
642 140 09 08
EGR Pipe-SHORT 3.0L V6 2007 & LATER
Exhaust gas recirculation pipe. This is the shorter of the two pipes.
|
|
|
|
|
000 905 43 05
EGR Temperature Sensor #3 3.0L V6 Diesel 2007 & LATER
Located at front of engine near the EGR valve
Note that the hold-down nut has internal threads.
|
|
|
|
|
906 528 03 00
Engine Air Filter Housing 2007-2018 3.0L V6 Diesel
Only for OM642 3.0 V6 diesel
|
|
|
|
|
906 528 01 00
Engine Air Filter Housing 2014-2016 4 CYL DieselOnly for OM651
2.1 Liter
4 Cylinder diesel
|
|
|
|
|
000 490 14 41
Exhaust / DPF Clamp - 65MM 2014-2016 4 CYL
Located at the joint at the OUTPUT end of the DPF, where it joints the pipe.
This clamp is for a 65MM OD tube (approx 76MM expanded).
This clamp is also used on 2014+ 2.1L 4 CYL engines
|
|
|
|
|
000 905 27 06
Exhaust Back Pressure Sensor 3.0L V6 2014 & LATER
See earlier version of this sensor below
|
|
|
|
|
000 490 13 41
Exhaust Clamp - 60MM 2007-2018
This clamp is for a 60MM OD tube (approx 70MM expanded)
This clamp is used at the INPUT side of the 2007-2009 3.0L V6 DPF
|
|
|
|
|
906 995 02 02
Exhaust Clamp-70MM 3.0L V6 2010 & LATER
This clamp is for a 70MM OD tube
Located at output side of catalytic converter to tailpipe
|
|
|
|
|
000 995 53 02
Exhaust Clamping Sleeve - 60MM 2007-2009 3.0L V6
Located at the joint between OUTPUT end of the DPF and the exhaust pipe.
This exhaust clamp is for a 60MM OD tube / pipe.
It is a clamping sleeve joint, with a clamp at each end of the sleeve.
|
|
|
|
|
901 492 00 44
Exhaust Hanger 2002-2018
These rubber exhaust hangers are used in several locations throughout all Sprinter exhaust systems.
|
|
|
|
|
651 142 00 01 07
Exhaust Manifold 4 Cyl Diesel 2014 & LATEROnly for the 4 cylinder OM 651 Turbodiesel engine
|
|
|
|
|
120 142 00 72
Exhaust Manifold Flange Nut 2002 & LATER11 required for 2002-2006 Inline 5 CYL engines
12 required for 2007-2018 3.0L V6 engines & 2019+ 3.0L V6
8 required for 2014-2016 Inline 4 CYL engines
|
|
|
|
|
651 142 05 80
Exhaust Manifold Gasket 2014-2016 2.1L 4 CYLOne required per engine
|
|
|
|
|
642 142 00 80
Exhaust Manifold Gasket-3.0 V6 Diesel 2007 & LATERExhaust manifold to cylinder head
Fits either side, left or right
Two required
|
|
|
|
|
111 990 04 05-FEBI
Exhaust Manifold Stud 2002 & LATER11 required for 2002-2006 Inline 5 CYL engines
12 required for 2007-2018 & 2019+ 3.0L V6 engines
8 required for 2014-2016 Inline 4 CYL engines
|
|
|
|
|
642 142 31 80
Exhaust Manifold to Turbocharger Manifold Gasket-LEFT 2007 & LATER 3.0L V6 DIESELExhaust manifold to Turbocharger gasket. Fits only left side
|
|
|
|
|
642 142 32 80
Exhaust Manifold to Turbocharger Manifold Gasket-RIGHT 2007 & LATER 3.0L V6 DIESELExhaust manifold to Turbocharger manifold-Right side
|
|
|
|
|
642 905 01 00
Exhaust Pressure Sensor 2007 & LATER V6 ONLYDPF Pressure Sensor
aka DPF Pressure Sensor
Connects to hoses before and after the exhaust Diesel Particulate Filter (DPF)
|
|
|
|
|
642 905 02 00
Exhaust Pressure Sensor 2014-2016 4Cyl ONLYDPF Pressure Sensor
aka DPF Pressure Sensor
Connects to hoses before and after the exhaust Diesel Particulate Filter (DPF)
|
|
|
|
|
000 492 08 81
Exhaust Seal Ring 2010+ 3.0L V6
|
|
|
|
|
901 490 41 21
Exhaust Tail Pipe - LONG CHASSIS ONLY 2002-2006
This tail pipe fits only those models with the LONG chassis (158 inch wheel base)
THIS ITEM IS TOO LONG TO SHIP - LOCAL PICKUP ONLY
|
|
|
|
|
000 905 01 32
Exhaust Temperature Sensor #1 2007 & LATER
Located in catalytic converter
|
|
|
|
|
000 905 52 05
Exhaust Temperature Sensor #2 2007 & LATER
Located at inlet of DPF (Diesel Particulate Filter)
|
|
|
|