|
|
|
BLUE Coolant/Antifreeze-GENUINE MERCEDES
1 gallon (concentrate) container to be diluted in equal parts with water, for a 50/50 mixture.
Not for Metris or Sprinter 4 CYL gasoline engines. This is for diesel engines only.
This is BLUE in color, check existing color of your coolant. This is the latest formula, Q 1 03 0004.
If you have the old fluid, it will require a complete drain and flush, as the old fluid Q 1 03 0002, has been discontinued and superseded by the blue fluid. Do NOT mix the two different colored fluids together, as they are not compatible.
|
|
|
|
|
Coolant By-Pass Hose 2.1L 4 Cyl 2014-2016
Short hose in water pump area, approximately 1.75 in outside diameter (45mm)
Has a slight dog leg bend in it.
|
|
|
|
|
Coolant Circulation Pump 2007 & LATERElectric water pump in heater hose circuit
aka auxiliary water pump |
|
|
|
|
Coolant Expansion Tank Cap 2007-2018For both gas & diesel engine models |
|
|
|
|
Coolant Expansion Tank-3.0 V6 & 2.1L 4 Cyl Diesel 2007-20183.0 V6 Diesel engine models and 2.1L 4 Cyl models
The level sensor and the cap are not included. See these two items below
|
|
|
|
|
Coolant Expansion Tank-3.5L V6 Gas 2007-2008Gasoline engine models only |
|
|
|
|
Coolant Hose 2.1L 4 Cyl 2014-2016Replaces 651 200 14 82, which has been discontinued.
|
|
|
|
|
Coolant Hose Manifold 2.1L 4 Cyl 2014-2016Hard black plastic manifold with snap-on hose connection
|
|
|
|
|
Coolant Level Sensor 2007-2018Fits Gas & Diesel V6 engine models
Located in bottom of Coolant Expansion Tank. |
|
|
|
|
Coolant Outlet 3.0L V6 2007 & LATER Aluminum water outlet on front of engine, 90 degree bend. Includes seal ring.
|
|
|
|
|
Coolant Pipe Socket 2.1L 4 Cyl 2014-2016Adjacent to thermostat housing
|
|
|
|
|
Coolant Temperature Sensor 2002 & LATER
Coolant temperature sending unit manufactured by Hella, an OEM supplier to Mercedes.
Located on the thermostat housing and/or on the intake manifold, depending upon the model year.
90 degree electrical plug connection. Held in place by metal clip.
A new o-ring seal is included.
|
|
|
|
|
Coolant Vent Hose 2.1L 4 Cyl 2014-2016Located in water pump area
|
|
|
|
|
EGR Cooler Hose 2014-2016 2.1L 4 CYL
|
|
|
|
|
Expansion Tank Hose to Engine 3.0 L V6 & 2.1L 4 CYL. 2014-2016Coolant Breather Hose - Expansion Tank to Engine
|
|
|
|
|
Fuel Filter Bracket/Water Outlet Flange 2014-2016 2.1L 4 CYLThis unit holds the fuel filter on the 2.1L 4 CYL engines, although it is technically part of the cooling system.
This part has been updated several times by Mercedes, due to leakage problems. This is the newest version.
|
|
|
|
|
Lower Expansion Tank Hose 3.0L & 2.1L Diesel 2007-2018Short larger diameter hose...see other two coolant tank hoses below
Connects to bottom of coolant expansion tank
|
|
|
|
|
Lower Radiator Hose (2-Way) 3.0L V6 Diesel 2007-2018Outlet or lower radiator hose (2-way hose version)
Only for 3.0L V6 diesel engine models, 2007-2019
Your engine may be equipped with the hose or the 3-way hose version below
|
|
|
|
|
Lower Radiator Hose (3-Way) 3.0L V6 Diesel 2007-2018Outlet or Lower hose (3-way hose version)
Only for 3.0L V6 diesel engine models
See 2-way hose version below
|
|
|
|
|
Lower Radiator Hose 3.5L Gas Engine 2007-2008Outlet or Lower hose |
|
|
|
|
M10 X 50MM BOLT -ZINC PLATED HEX HEAD
Strength rating 10.9
Sold individually
Used for motor mounts on 2002-2006 models. One bolt for each engine mount is required.
|
|
|
|
|
M6 X 20 MM BOLT-ZINC PLATED TORX HEAD
M6 X 20MM
sold individually
Used on all SPRINTERS
|
|
|
|
|
M8 X 40 MM BOLT-ZINC PLATED TORX HEAD
sold individually
Used on all SPRINTERS
Also used as attachment screws (6 required) for updated oil cooler/oil filter housing
|
|
|
|
|
M8 X 55MM BOLT-ZINC PLATED TORX HEAD
M8 X 55MM
Sold individually
Used on all SPRINTERS
|
|
|
|
|
Metal Coolant Pipe 2007+ 3.0L V6Metal coolant pipe on front of engine.
|
|
|
|
|
Middle Expansion Tank Hose Diesel 2007-2018Coolant air breather hose.
Short smaller diameter hose to tank. Connects to the fitting on the tank that is just below the middle off the tank.
See other two expansion tank hoses below
|
|
|
|
|
Radiator 2.1L 4 CYL Diesel 2014-2016Fits ONLY 2.1L 4 Cyl models
|
|
|
|
|
Radiator 3.0L V6 Diesel 2007-2018Fits both 3.0 Liter diesel engine and 3.5 Liter gasoline engine models
This product is manufactured in Denmark, by Nissens, a leading European manufacturer of high quality automotive cooling components.
|
|
|
|
|
Radiator Drain Plug 3.0L V6 Diesel 2007-2018Fits radiators for both 3.0 Liter diesel engine and 3.5 Liter gasoline engine models
|
|
|
|
|
Radiator Hose-Lower Extension 3.0L V6 Diesel 2007-2018Only used on passenger van models with rear heater.
Only for 3.0L V6 diesel engine models, 2007-2019
|
|
|
|
|
Radiator Vent Hose 2010-2018 3.0L V6From engine to radiator
|
|
|
|
|
Rear Grab Handle BoltFor rear grab handles.
|
|
|
|
|
Thermostat Main Seal 2007 & LATER 3.0L V6This is the larger main seal for the thermostat.
Do not order if you are purchasing a new thermostat, as it is supplied with the new thermostat
|
|
|
|
|
Thermostat Pipe Seal 2007-2009 3.0L V6This seal is located between the coolant pipe to the thermostat.
Do not order if you are purchasing a new thermostat, as it is supplied with the new thermostat
|
|
|
|
|
Thermostat-3.0L Diesel Engine 2007-2009Thermostat includes the housing and both seal rings
Has flange mount at both ends
|
|
|
|
|
Thermostat-3.0L V6 Diesel Engine 2010-2020Thermostat includes the housing and seal ring.
Manufactured by Wahler, the OEM supplier to Mercedes......the exact same unit.
|
|
|
|
|
Upper Radiator Hose 3.0L V6 Diesel 2007-2009Inlet or Upper hose
Only for V6 diesel engine |
|
|
|
|
Upper Radiator Hose 3.0L V6 Diesel 2010-2018 3.0L V6 DieselInlet or Upper hose
Only for 3.0L V6 diesel engine |
|
|
