|Eurovan 1992-2003 All four wheels
Rialta 1996-2005 For FRONT WHEEL ONLY
This is the same standard wheel bearing found in the front and rear of all Eurovans and is used only in the front of Winnebago Eurovan based motor homes.
When installing a wheel bearing into a control arm or trailing arm, you must only press against the outside race or rim of the bearing. When installing a bearing onto a shaft, you must only press on the inner race or center of the bearing. Failure to do this will quickly result in the destruction of the roller bearing.
DO NOT use this bearing for the rear axle of Rialta, Sunstar or Vista. It has an insufficient load bearing rating and will quickly fail. See correct rear bearing below. It is the correct wheel for the FRONT axle on the Winnebago motor homes.