901 598 01 82-AFT
2004-2006 Charge Air Hose Kit ***FREE USA SHIPPING***
Fits 2004-2006 Sprinters
Includes both aftermarket charge air hoses:
1 x 901 528 53 82
1 x 901 528 54 82
901 598 01 82-MB
2004-2006 Genuine Mercedes - Charge Air Hose Kit
Fits 2004-2006 Sprinters
Includes both Genuine Mercedes charge air hoses.
1 x 901 528 53 82
1 x 901 528 54 82
*Free USA Shipping*
000 490 14 41
Exhaust / DPF Clamp - 65MM 2014-2016 4 CYL
Located at the joint at the OUTPUT end of the DPF, where it joints the pipe.
This clamp is for a 65MM OD tube (approx 76MM expanded).
This clamp is also used on 2014+ 2.1L 4 CYL engines
612 050 16 01
Exhaust Camshaft 2002-2006 2002-2006 For both OM612 and OM647 engines
000 490 13 41
Exhaust Clamp - 60MM 2007-2018
This clamp is for a 60MM OD tube (approx 70MM expanded)
This clamp is used at the INPUT side of the 2007-2009 3.0L V6 DPF
000 995 53 02
Exhaust Clamping Sleeve - 60MM 2007-2009 3.0L V6
Located at the joint between OUTPUT end of the DPF and the exhaust pipe.
This exhaust clamp is for a 60MM OD tube / pipe.
It is a clamping sleeve joint, with a clamp at each end of the sleeve.
901 492 00 44
Exhaust Hanger 2002-2018
These rubber exhaust hangers are used in several locations throughout all Sprinter exhaust systems.
901 490 34 19
Exhaust Head Pipe 2002-2003
*Only 1 Remaining in Stock*
This is the header pipe, which is located just ahead of the diesel catalytic converter.
903 490 09 19
Exhaust Head Pipe 2004-2006
*FINAL STOCK - Part will no longer be available once stock is depleted*
This is the header pipe, which is located just ahead of the diesel catalytic converter. Has flexible section.
612 142 01 01
Exhaust Manifold 2002-2006
Only for the five cylinder engine models.
120 142 00 72
Exhaust Manifold Flange Nut 2002 & LATER
OEM Nut (8 mm) - Made in Germany
11 required for 2002-2006 Inline 5 CYL engines
8 required for 2014-2016 Inline 4 CYL engines
612 142 03 80
Exhaust Manifold Gasket 2002-2006
111 990 04 05-FEBI
Exhaust Manifold Stud 2002 & LATER 11 required for 2002-2006 Inline 5 CYL engines
124 490 01 41
Exhaust Pipe Clamp 2002-2006
ID is 64mm
This clamp is used at the joint between the catalytic converter and the muffler and also from the muffler to the tail pipe. (2 per vehicle)
901 490 41 21
Exhaust Tail Pipe - LONG CHASSIS ONLY 2002-2006
This tail pipe fits only those models with the LONG chassis (158 inch wheel base)
THIS ITEM IS TOO LONG TO SHIP - LOCAL PICKUP ONLY
901 490 40 21
Exhaust Tail Pipe-MEDIUM CHASSIS ONLY 2002-2006
*** This part is no longer available ***
This tail pipe fits only those models with the MEDIUM (144 inch wheel base)
611 053 01 05
Exhaust Valve-OM612 2002-2003 2002-2003 OM 612 engine only
628 053 00 05
Exhaust Valve-OM647 2004-2006 OM 647 engine only
612 050 20 01
Intake Camshaft 2002-2003 2002-2003 OM612 engine only
612 050 18 01
Intake Camshaft 2004-2006 2004-2006 OM647 engine only
612 141 01 80
Intake Manifold Gasket 2002-2006
Intake manifold to cylinder block
611 053 01 01
Intake Valve-OM 612 2002-2003 Only for 2002-2003 OM 612 engine
628 053 00 01
Intake Valve-OM 647 2004-2006 Only for 2004-2006 OM 647 engine
000 492 09 81
Seal Ring - Turbocharger to Exhaust 2004-2006 5 CYL & 2014-2016 2.1L 4 CYL
Located at joint between the turbocharger and the front pipe at the clamp area This seal ring is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL engines
203 490 04 41
Turbocharger Exhaust Clamp TYPE 2 2004-2006 & 2014-2016 2.1L 4 CYL
Located at the joint between the turbocharger and the exhaust header pipe on 2004-2006 5 CYL engines and on the INPUT end of the DPF on 2004-2016 4 CYL engines.
This is the tapered design, which uses a thick sealing ring, see below... Compare to your original before ordering, as there are two different types for 5 CYL engines.
This clamp is used on 2004-2006 5 CYL engines, as well as 2014-2016 2.1L 4 CYL (INPUT end of the DPF).
5080044AB
Valve Guide 2002-2006
10 required
Copyright © 1985-2024 Europarts. All Rights Reserved.
